Used Samzon Pile Turner for sale (509)

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C Podpfx Aiev Hn N Uo Torc - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Pjdpfsxybdhsx Ai Terc Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting Podoxu I T Espfx Ai Tsrc - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Psdpszv S R Dsfx Ai Tjrc Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit BAT 102 Automatic Stacker S-3 Max. Sheet Size X : 1020 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Polar LW 1000-4 stacking lift, year of manufacture 2003 Platform: 80 x 126 mm Podpfx Aiozwg A Ro Torc The automatic lifting of the cutting material allows the operator to load the material into the shaking device or directly into the cutting machine at an ergonomically favorable working height. The stacking lift can also be used to unload cutting material. Stacking lifts do not need to be anchored to the floor and can therefore be easily relocated. They are equipped with continuously adjustable photoelectric barriers for automatic lifting or lowering. The control panel can be easily mounted on the right or left side.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Podozvyl Aspfx Ai Torc Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm Podpszcuz Hjfx Ai Terc - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 230 kg, machine/vehicle number: RR42ABH, SCHORR RR42ABH – Professional wood chipper for branches up to 100 mm in diameter ✅ New & in stock ✅ Shipping possible ✅ Self-feeding ✅ For tractors The SCHORR RR42ABH is a powerful drum wood chipper for professional use. It effortlessly processes branches and log sections up to 100 mm in diameter and impresses with its robust design, high pulling power, and easy operation. Using the 3-point linkage (Category 1 and 2), you can attach the RR42ABH to your tractor in just a few minutes. The height-adjustable support feet keep it securely in position during assembly and disassembly, and the matching PTO shaft is included. With a power requirement of 18 to 50 hp, it is also suitable for smaller tractors and compact tractors. The self-feeding cutting unit with 4 knives and 1 hardened steel counter-knife guarantees a clean chipping result and a consistent material flow. The large feed hopper allows for quick and safe material feeding, even with heavily branched wood. The discharge chute is 290° rotatable, so the chipped material can be deposited in a targeted manner – whether in piles, trailers, or big bags. Advantages ✓ Compact 3-point mounted chipper for tractors from 18 to 50 hp ✓ Chips branches and brushwood up to 100 mm in diameter ✓ Extended feed hopper also handles bulky crown wood ✓ Robust knife disc with 4 knives and counter-knife ✓ Rotatable discharge chute (290°) for targeted filling ✓ Height-adjustable support feet, quick 3-point mounting (Cat 1 & 2) ✓ PTO shaft included, ready for use in minutes ✓ Directly from the manufacturer, with spare parts stock & workshop service Technical data Manufacturer: SCHORR Model: RR42ABH Drive type: PTO, direct drive 3-point category: Cat 1 & 2 Max. branch diameter: 100 mm Chipping type: Drum, self-feeding Number of knives: 4 + 1 counter-knife Weight: 230 kg Overall length: 1070 mm Overall width: 830 mm Overall height: 1240 mm Discharge angle: 290° Recommended tractor power: 18-50 hp PTO speed: 540-1000 rpm The RR42ABH is designed for long-term use. All components are easily accessible, allowing maintenance work to be carried out quickly. Spare parts are available at any time from stock. Upon request, we offer technical service and repairs in our own workshop or directly at your location. Financing Leasing or installment payments are possible – please contact us. Pedpfx Ajzh Hlgji Tjrc

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Pedpfxjzh S Ugo Ai Tjrc Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 110SIS, compressed air connection: 6 bar, working width: 1,100 mm, warranty duration: 12 months, operating speed: 1,000 mm/s, Komfi Laminator Sirius 110 with HotKnife, Rotary Knife and Automatic Stacker New, Manufactured 2025 Ideal for commercial printing and packaging industry! Max. production speed: 60 m/min (5091 B1 sheets landscape/h); 50 m/min with hot knife (4243 B1 sheets landscape/h) Max sheet size: 1100 x 1100 mm Paper weight: 115-600 g/m² Dimensions (incl. automatic stacker): 7.08 x 2.71 m Min. sheet dimensions: 300 x 297 mm Max. paper pile: 1350 mm including pallet Thickness of laminating film: 24-50 μm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: 5 min Sheet overlap accuracy: 1.5 mm Consumption of compressed air: max 80 l/min Max. pressing force: 43 kN Max. linear nip pressure: 39 N/mm Double capacity for sheets in the high-pile feeder and for laminating film = reduced machine downtimes, increased machine efficiency. Square shaped feeder for B1 sized sheets to increase the machine productivity. Easy pallet placement. Energy saving zone heating system with fastest heat up time. Feeder: 2-way accessible high pile pallet feeder with Komfi double action feeding head. Precise and constant sheet overlap achieved thanks to the sheet registration system using a mis-feed sensor, front lays, accelerating in-feed pulleys and guiding plates to prevent thin paper from wrinkling. Laser guided pallet driving system with quick adjustable lateral stops and air nozzles. Combined air / vacuum compressor. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: High-polished chrome laminating roll, with deep drilled sensors located close to the film surface. Dry, low inertia multi zone heating system using resistance heater, temperature detection by deep drilled sensor with the touch-less signal convertor. Laminating rolls are belt driven to achieve outstanding sheet surface quality for special metallic and holographic films. Pneumatic nip pressure applied by durable polyurethane coated pressure roll, with nip stoppers for thick sheets and windows lamination. „On-the-fly” side adjustable air expansion unwind shaft, with automatic film tensioning and capacity detection. Height adjustable film spread roll to smooth wrinkles on film. Zone heating of the laminating roller keeps roll temperature even and saves energy when laminating small formats. Separator & Delivery: Pneumatic pull roll with adjustable nip force to create tension for sheet decurling. Dual roll/bar decurling adjustable unit with position detection to have sheet registered for its separation. Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Automatic stacker. Options: Film slitter to cut film to the requested width. Additional On roll perforator. Effect foiling device (OTF). Pallet fine positioning tool. Hot knife with variable rotation speeds for perfect separation of thick, PET and Nylon films that eliminates flagging. Prjdpfezia S Nox Ai Tjc Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Air ionizer (behind the snapping roll) – helps smooth unloading of sheets on the unloading table without static charge. Windows lamination kit. Strip lamination kit.

Condition: used, Year of construction: 2001, functionality: fully functional, Description Podpszgx N Iofx Ai Terc Minimum format: 10 x 15 cm Maximum format: 4 x 84 cm Flat-pile feeder, diameter 40 and DCT control 4 folding stations, 40 cm, with noise reduction Delivery 1 printing vacuum compressor, soundproofed

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Müller Martini Primera C130 gathering machine Year of manufacture: 2007 (2013) - 6 flat-pile feeders 0379 (2013) - sequential on/off switching - 1 cover feeder 0507 (2013) - ASIR 3 - SEMKO at the front and rear - First copy control - 1 stitching head 0383 (retrofitted, status 2013) - 2 standard stitching heads HK 75Q - 2 loop stitching heads HK Oe Q6/8 - 1 three-knife trimmer 0449 (retrofitted, status 2013) - 1 central trimming unit - 1 cross-laying unit Perfetto - PIAB air system Predpfx Aiezdytce Tjc

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Prjdpfxjy U Hdls Ai Toc Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Pedpfx Aieyzdt Do Tjrc Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Slitter shaft cassette - Perforating shaft - Anti noise hood(s) - Excluding delivery Max. mechanical speed: 30 - 230 m/min Maximum size range: 68 x 120 cm Minimum size range: 15 x 20 cm

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt Podpfxoy Awcbo Ai Tsrc PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. Prsdpfxjyyb Suo Ai Tec With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: good (used), Year of construction: 2008, OMET Year of manufacture: 2008 Printing process: UV flexo Predpsyyn Snofx Ai Tjc Condition: Used – very good condition (single owner) Location: Italy _____ Machine Configuration • 8 x UV flexo printing units • UV curing system • 2 x die-cutting stations • 1 x Gap Master system • 1 x additional die-cutting unit for sheet-off • Sheet delivery with evacuation conveyor • Turn bar (web turner) • 3 x corona treatment units • Chilled impression cylinders with integrated chiller • Suitable for adhesive label printing _____ Equipment & Tooling • 3 sets of tooling • 10 anilox rollers • 3 magnetic cylinders _____ Technical Highlights & Advantages This OMET Flexy 330 offers a robust and versatile configuration, ideal for a wide range of label applications. Key advantages: • 8-color configuration for high flexibility • Corona treatment for improved ink adhesion • Chilled impression cylinders for consistent print quality • Well-maintained machine from single owner • Currently in production – inspection and testing possible This machine represents a cost-effective solution for converters seeking a flexible and efficient printing line. _____

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Prsdjyk H H Repfx Ai Toc Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: used, Year of construction: 1999, 6 pockets 2 swords Standing pile delivery SBPD mobile sword Psdpfjwv D Iwjx Ai Tsrc

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Prodpfxswnqrge Ai Tjc Machine no: 11801

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Prsdpfx Ajydnxnei Toc Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: ready for operation (used), Year of construction: 1999, Herzog Heymann small folding machine KL112 – 1250, year of manufacture 1999 Flat pile feeder, shingled, 176–646, station with 6 pockets Cold glue unit HHS C210 with one glue head 6 segmented folding rollers Predpfoxlu Tysx Ai Tsc The second station is not available!

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm Predpfxjvxtrxj Ai Tjc

Condition: used, Year of construction: 2007, Palletiser Solema Cartesio Year: 2007 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser Podpfjvcmxyox Ai Tjrc - Slip sheet feeder - Pallet transport system

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Block-making unit 2 nailing machines Turners Pedpfx Ajyvggzei Terc Brand marking (burning) Corner cutting Stacker Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.