Used Scm Scm Superfici Mini for sale (3,334)

Condition: used, Wide belt sander SBF SATEFANI 2W126   - The machine in stock - Reconditioned - very good condition   TECHNICAL PARAMETERS :   - Maximum grinding width 1100 mm - The maximum height of the element 160 mm - The minimum amount of grinding 3 mm   - The main engines 2 x 11 kW - Engine feed 2.2 kW - Engines height adjustment 0,37 kW   - 1 rubber roller 65 shore with a diameter of 270 mm - 2 rubber roller 45 shore with a diameter of 400 mm   - Two types of feed speed - Pneumatic oscillation on krańcówkach - Nozzle diameter 2 x 150 mm - Tape in very good condition   Overall dimensions machine: - Length 280 cm Podpfxocvwf To Ai Tjrc - Width 180 cm - Height 250 cm - Weight ~ 3000 kg

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Pedpfet Hal Dsx Ai Torc Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Pjdpfxew Iddzo Ai Tjrc Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr Predpfx Aiowqdbmj Tjc

Condition: used, machine/vehicle number: 008473, X axis working area: 5000 mm Y axis working area: 1640 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Pjdpfx Asywaf Iji Tjrc Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Psdpfjy Dq Iaex Ai Terc Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,250 mm, total width: 1,050 mm, total height: 805 mm, overall weight: 1,000 kg, SCM S 63 PLANER – 630 mm | 4 KNIVES | 5.5 kW | JBS MACHINES! Professional SCM S 63 planer with a planing width of 630 mm. Robust, industrial-grade construction designed for precise wood processing. A machine for carpentry workshops, production facilities, and demanding users seeking a reliable machine with a large working width, rather than a lightweight design intended for occasional use. SCM is a renowned Italian manufacturer of woodworking machinery. The S 63 model features a rigid construction, a large worktable, and a 4-knife cutterhead, making it ideal for daily woodworking tasks. KEY ADVANTAGES: - Planing width up to 630 mm – allowing for the processing of wide workpieces - 4-knife cutterhead (traditional knives) - 7.5 kW motor – suitable for professional use - Robust SCM construction – machine designed for workshop use - Adjustable feed rate via lever - Large worktable - Construction ensuring stability during operation - Ideal machine for carpentry workshops, furniture, door, stair, and wood element production TECHNICAL DATA: - Manufacturer: SCM - Model: S 63 - Planing width: 630 mm - Maximum planing height: 240 mm - Minimum planing height: approx. 3 mm - Cutterhead: 4-knife - Number of knives: 4 pcs. - Cutterhead speed: 4500 rpm - Feed rate: 6 / 9 / 12 / 18 m/min - Motor power: 7.5 kW - Power supply: 380 V - Table dimensions: 630 × 1000 mm MACHINE DIMENSIONS: - Length: 1250 mm - Width: 1050 mm - Height: 805 mm Weight: 1000 kg WHY IS IT WORTH IT? If you are looking for a real workshop machine with a width of 630 mm that will allow you to process larger workpieces, the SCM S 63 is a solution worth considering. This is not a small, lightweight planer for occasional use. The large working width, heavy-duty construction, and 4-knife cutterhead make this machine an excellent choice for a facility that needs efficient wood processing. Machine available for immediate delivery. Before purchasing, you can view and test the machine. Please contact us – we will be happy to provide additional information about the machine, transport, and loading options. It is possible to test the machine on-site. Pjdpfjz A Apzjx Ai Tsrc Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), functionality: fully functional, two bottom heads Prodpfxez D Acwj Ai Tjc one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: used, Year of construction: 2019, machine/vehicle number: AB00012078, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 380 V, input frequency: 50 Hz, cutting height (max.): 120 mm, saw blade diameter: 350 mm, actuation type: electric, rotational speed (max.): 4,200 rpm, total length: 2,100 mm, total width: 1,750 mm, total height: 1,600 mm, overall weight: 1,866 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Band width 300 mm Maximum blade diameter 350 mm Minimum cutting length 390 mm Feed rate 6-48 m/min Blade holder device diameter 70 mm Spindle rotation speed 4200 rpm Exhaust port diameter 200+100 mm Spindle diameter: 50 mm Bushing diameter: 70 mm Bushing equipped with spacer rings Centralized automatic lubrication Four upper pressure rollers Machine dimensions (L/W/H): 210 / 175 / 160 cm Equipped with: Laser device – projects the cutting line reference onto the workpiece. Mechanical device / programmable guide, controlled from the mobile screen, for laser-guided cutting. Some typical applications: Prjdpfx Aiez Enhze Tjc - Trimming irregular edges without using a guide. - Selecting good portions on boards with knots or cracks, using a fast-moving guide and a single blade.

Condition: excellent (used), Main motor 25 kW Podpfsqwg Iasx Ai Tjrc

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit - Brushing unit - Year 2008 (CE) Prjdpfer Iynbsx Ai Toc

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 Prjdsixxwmspfx Ai Tjc High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Dial indicators in the handwheel Motor power 7.0 kW 4 speeds Psdpfxsipv A To Ai Terc 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Long cast iron tables Safety rulers

Year of construction: 1994, condition: excellent (used), 29 spindles maximum width of the element 168mm left / right spindles 32mm spindle spacing Psdpfx Aoiclfboi Tjrc electric adjustment of the angle of the aggregate 4 pneumatic clamps pneumatic extension of the drilling head power supply 380V

Condition: excellent (used), Multisaw scm m3 - track width 300 mm - cutting height 120 mm - engine power 37 kW - weight 1800 kg - year 2003 Podji Ewnaepfx Ai Torc - max. element width 100 cm - min. element length 40 cm - smooth adjustment of feed speed - three rows of anti-kickback pawls - spindle diameter 50 mm - sleeve diameter 70 mm - sleeve equipped with spacers and 5 saw blades 350 mm - blade diameter from 200 to 350 mm - automatic central lubrication - four upper pressure rollers – a set of keys Machine and tape in very nice condition.

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Podpfx Aetr A Evji Terc Number of axles: 3

Condition: excellent (used), SCM M3 multi-track saw Width of track 300mm Prodpfem Rg Dgex Ai Toc Cutting height max 120mm Main engine power 37kw Feed speed adjustable on variator 6-45m/min Disc diameter max/min 350/200mm Maximum piece width 1000mm Minimum workpiece length 600mm 3 rows of anti-rejection latches Spindle diameter 50mm Bushing diameter 70mm Central track lubrication CE certificate Extraction spigot 200mm

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 K Moulder Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Prjdpfx Aewc A R Dsi Toc Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, functionality: unexamined, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Functionality: Not tested - Compatible Machine: SCM OLIMPIC/K800/K1000 EDGE BANDING MACHINE - If interested, we offer a revision service, contact us. Prsdpov Iz Slofx Ai Toc

Condition: used, Ferwood Code: RU0005107 - Manufacturer Code: 2990321075L - Condition: Used - Compatible Machine: CNC SCM - Weight: 2KG - Dimensions: 20X20X20 - If interested we offer a revision service, contact us. Psdpfx Ajvay S Usi Tjrc

Condition: used, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Psdevazhdopfx Ai Terc

Condition: used, Ferwood Code: RU0001904 - Manufacturer Code: M75194400 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer an overhaul service, contact us. Psdpjvazlpofx Ai Tjrc

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required Psdpfoxg El Asx Ai Tjrc 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Year of construction: 2002, condition: used, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels Predpsx Url Ujfx Ai Tjc - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: excellent (used), SCM internships in excellent condition Prsdpfxot Hkq Re Ai Tsc