Used Sheet Metal Beading Machine Etb 40 for sale (77,976)

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. Godpfx Ajdzqblsptsbp The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Gedpfx Apodzqaaotebp Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. Godjc Nxwhepfx Aptebp With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: Gbedpfx Aeb Eg Nkeptop the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length Gjdpfxec Ikrqe Aptebp a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2026, ZGH-type machines are a versatile solution for sheet metal processing. They are universally applicable for demanding workshop applications. To create this versatile solution for all applications up to 1.2 mm steel sheet, PPHU Prod Masz drew on its many years of experience in mechanical engineering. The ZGH machines offer the optimum in precision, durability, and stability. This model is equipped with a control panel. Maximum working length: 3140 mm Maximum sheet thickness: 1.2 mm (steel) Weight of the manual machine: approximately 2100 kilograms Upper beam lifting in three stages Bending die: 30 mm Maximum clear distance between the beams: 100 mm Bending angle: 150 degrees Delivery to Germany: 750 euros Delivery time: up to 2 weeks Optional: roller shear at an additional cost Optional: rear stops with scale at an additional cost We look forward to hearing from you! Godpfx Apsc I Tn Hetsbp

Condition: new, material width 1015 mm material thickness 1 mm Gjdpfxoupxdko Aptebp speed von Hand weight 240 Kg dimensions 1420 x 600 x 750 m

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine ROLEI Type: 00645-KKE2 Year: 2011. Gjdswnpfljpfx Aptebp

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 10,246 h, machine/vehicle number: 5022/03, working width: 3,000 mm, 1995 COLLY folding machine in working order. DELEM DA20 numerical control Godpfx Apou E Eyrstebp Power 125T for 3m

Condition: new, Year of construction: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without roller shears We are your partner when it comes to sheet metal working machines. Our claim to ourselves is to provide high-quality and reliable work in order to more than meet your requirements! We are only so successful because we put our heart and soul into our work! Technical specifications the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms lifting the top beam in three layers The maximum clear width between the beams is 80 mm Gbsdpfx Aob Hqa Esptjp Delivery throughout Germany 165 euros Price: 1450 euros incl. transport rollers Delivery time: every week Cash on delivery The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros Manual folding machine costs 75 euros as an option The machine complies with CE guidelines and has a 12-month guarantee. We issue the invoices with 0% (intra-community delivery) as well as with 23%. We are looking forward to your contact!

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Gjdpsinwwzjfx Aptebp Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: new, Year of construction: 2026, Timely delivery, trustworthy equipment ! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Prod-Masz offers you first class equipment. Convince yourself of our sheet metal bending machines. Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Price: 1.050 euros Delivery date: every week Gjdpfx Aecgaa Hjptsbp We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with 23% of VAT.

Condition: new, Year of construction: 2026, The manufacture of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our experience and attention to our bending machines, thanks to which we can continue to improve our folding benches, so we don't forget who we really work for. The quality of our bending machines is very important to us. Gedpfob Na Eqsx Aptebp Bending machine ZGR-2140 / 1.2 Warranty: 12 months. Certificate CE Eccentric pressure that is shifted to both sides of the machine Working length: 2140mm STEEL SHEET 1.2 mm Non-ferrous metals 30% more sheet thickness Folding beam: 24 mm Bending angle: 145 degrees Cutting along the entire working length, Lifting the upper cheek in three positions, maximum clear width between the side panels 80 mm rear frame for holding sheet metal, front cutter limiter to ensure the specified cutting width, We are looking forward to your contact!

Condition: used, Year of construction: 2007, Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Gsdpfxotpb Une Aptebp Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2005, working width: 1,000 mm, Deburring machine Fab. LISSMAC Typ. SBM-B 1000 Year 2005 Technical data Make: LISSMAC Type: SBM-B 1000 Year of construction: 2005 Gjdovgb Hgjpfx Aptobp Passage width: 1000 mm Sheet thickness: max. 20 mm Sheet size min. length: 150 mm Sheet size min. width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Equipment - Automatic material feed-through - Infinitely variable feed rate 0-10 m/min - Sheet thickness adjustment: Hand crank with worm gear and scale, infinitely variable - Brush depth adjustment: Hand crank with worm gear and scale, infinitely variable - Various accessories - Operating instructions All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Gsdpfx Ascv S H Ajptobp Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2025, The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines. A professionally designed folding machine is the basis for years of use of the machine. It is therefore important to have a trustworthy company at your side. Small, compact folding edge 1250 cm to steel sheet 0.8 mm, aluminum sheet 1 mm with built-in curl forming machine and roller shears. - Possibility of cheek adjustment - Weight: 49 kg - Bending beam: 15mm - Working length: 1.25 m - built-in bead machine -ᐳ tube diameter 14mm - 60mm opening - Bending radius: 145 degrees Price: 1.450 euros We are looking forward to your contact Godpfx Aocgbilsptebp

Condition: new, Year of construction: 2025, ZGR-2140/0,8 with transport wheels Gedpfx Apjckm Hmetobp Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty The price excludes Vat – it applies only to registered companies with an European Vat Id. In order to receive 0% Vat price, you must send us full company details (full name address with postcode and a Valid European Vat ID)

Condition: excellent (used), KD-PUTZ with oil lubrication Completely made of stainless steel Gedpfxjgh A Sve Aptobp Sheet metal polishing machine for perforated sheets and regular sheets with 2 edges For 60x80 sheets, edge on the short side In top condition Connection: 16 Ah

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Gjdodad Adepfx Aptjbp Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping Gbsdpfecb H Exex Aptjp By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: new, Year of construction: 2025, Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides. Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work. We get this possibility thanks to the construction with special cutouts. This machine performs bending operations from the top up and down. The strengths of this bending machine include high performance while maintaining the precision and repeatability of the machining. Intended for processing steel, aluminum and other sheet metal. This folding bench is extremely functional. RED 2700 / 1.0mm Technical specifications: - maximum working width: 2580 mm - Bending performance: up to 1.0 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops Gjdpsb H Ac Isfx Aptebp - Weight: approx. 490 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We issue the invoices with 0% (intra-community delivery) We are looking forward to your contact!

Condition: new, Year of construction: 2025, Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length Gsdpfx Apjc N Af Dotjbp - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - The machine have certificate CE and 12 months warranty.

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Gjdpfx Apefnabyotjbp Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm Gbedpfsci R Exex Aptop - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)