Used Somet Sps 200 U for sale (53,322)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Hodpeykuiajfx Ab Njfg Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi Hjdpfxsykub Ao Ab Njfg TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Hfjdswfqvmopfx Ab Nog

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 05/2028, total width: 440 mm, total length: 540 mm, total height: 870 mm, input frequency: 5 Hz, overall weight: 90 kg, electrical fuse: 16 A, power: 1.1 kW (1.50 HP), Planetary Mixer TOP Model: SM 200 C Proven technology ... already successfully tested many times! Simple manual operation 3 gear speeds 1 stainless steel bowl, 20 liters 1 flat beater 1 dough hook 1 whisk Bowl safety guard / intrusion protection Tabletop machine with bowl lift DGUV V3 tested - exclusively by us Connection: 220V Dimensions (W x D x H) in mm: 440 x 540 x 870 NEW machine & SAB tested 24 months warranty + spare parts service Option: Delivery service Additional bowls & whisks Hfjdeu Sfglspfx Ab Nsg Maintenance contract Base stand Spare parts box Leasing & rental service We have a wide selection of planetary mixers in stock!

Condition: used, Year of construction: 2021, operating hours: 13,000 h, KOMATSU WA200 – LIGHTLY USED, TOP CONDITION, NEW TYRES ----VEHICLE HISTORY ORIGINAL PAINTWORK FULL SERVICE CARRIED OUT BY SCHLÜTER (KOMATSU DEALER) USED ONLY FOR LIGHT WOOD SHAVINGS HANDLING TECHNICALLY AND VISUALLY IN VERY GOOD CONDITION Hfsdpfoxyb E Eex Ab Nog ----VEHICLE EQUIPMENT KOMATSU WA200 YEAR OF MANUFACTURE: 2021 OPERATING HOURS: 12,926 HRS (APPROX. 5,000 HRS IDLE TIME) ENGINE PRIMARILY IN IDLE – OPERATING HOUR LOGS AVAILABLE ENGINE OPERATION PROVEN VIA OPERATING REPORTS ----EQUIPMENT FEATURES EROPS (ENCLOSED CABIN WITH ROPS PROTECTION) AIR CONDITIONING CENTRAL LUBRICATION SYSTEM GP BUCKET WITH STRAIGHT BOLT-ON CUTTING EDGE (APPROX. 60–70% CONDITION) NO QUICK COUPLER LOADER ARMS IN VERY GOOD CONDITION FOR BUCKET USE ----TYRES TYRES: 17.5–R25, 4X NEW ----EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) EXPORT DOCUMENTATION/CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5, 15, 30-DAY REGISTRATION PLATES, AND 15-DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA E-MAIL VERBAL RESERVATIONS ARE NOT VALID For EU and non-EU sales, a minimum deposit between €500 and €1,000 is required. Changes, errors, and prior sale reserved! More vehicles available on our website. Sales subject exclusively to our General Terms and Conditions – see homepage. Important note: Despite careful checking of all details in our offers, errors may occur, some due to transmission issues between platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal: This sales listing does not constitute an offer within the meaning of §145 BGB (German Civil Code). Instead, it is intended as information for contract initiation. All specifications provided are without guarantee and do not constitute warranted characteristics.

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, clamping force: 1,000 kN, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 Hfsdpfx Aboubamvs Nsg C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), CATALOGUE NO. 6623 TECHNICAL DATA - Output log diameter: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Configuration: - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – German-made – Ability to turn posts into cones – Used rounder, in very good condition Net price: 98,900 PLN Hfsdpfsx Rqzaex Ab Nog Net price: 23,550 EUR (based on the rate of 4.2 EUR) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer of the manufacturer. All trademarks and names are used solely for identification purposes. We resell only goods that have already been placed on the market by the manufacturer. MAR-MASZ has no business relationship with the manufacturer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Hfedpfox Rywkjx Ab Nsg

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm table width 2000 mm dayligth 2500 mm Hfodpfx Asynmncsb Nog stroke 2600 mm tank capacity 1000 l total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: used, Year of construction: 1991, Technical details: Hsdjy Alw Hepfx Ab Nofg pressure: 2000 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: used, Year of construction: 1998, functionality: fully functional, Description: Mazak CNC lathe with chip conveyor Type: Mazak SQT 200 Control: MAZATROL PC FUSION 640T Year of manufacture: 1998 Machine number: 320140264 Bar feeder: KSF 60/S4 included in price Chuck: no longer available Chip conveyor: chip conveyor present X-axis: 190 mm Z-axis: 535 mm Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter through loader: 70 mm Max. swing diameter: 525 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 Operating/spindle hours: single-shift operation with 80% utilization Voltage: 400/230 V 50 Hz Control voltage: 230 V/24 V Bar loader: IEMCA TAL/AUTO 65/32 Serial number: 020417GA05 Max. bar length: 3,200 mm Min. bar length: 400 mm Max. bar diameter: 32 mm Min. bar diameter: 5 mm Bar loader weight: 850 kg Overall height: approx. 2,000 mm Overall length: approx. 4,000 mm / 5,700 mm Overall width: approx. 1,800 mm Total weight: approx. 5,000 kg Hodpfx Aeyrrctob Njfg Location: Germany, 72622 Nürtingen near Stuttgart Delivery: Short-term possible by arrangement Freight terms: Ex works General condition: Used, very good, fully functional. From the user, first-hand, not a dealer, professionally maintained and serviced The machine can be inspected under power. All technical details are provided without guarantee.

Year of construction: 2008, operating hours: 36,239 h, condition: used, machine/vehicle number: 205849, Traverse paths (x/y/z): 230/100/575 mm, power: 46.2 kVA, weight: 5,200 kg, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, MAZATROL Matrix Nexus control, !!!Collection: 03.+04.06.2026!!! Hfodpfx Asyztf Neb Nsg

Year of construction: 2019, operating hours: 13,324 h, condition: used, machine/vehicle number: 298546, Travel distances (x/y/z): 230/100/575 mm, power: 47.4 kVA, weight: 5,600 kg, 16-position tool changer, Y-axis, new main spindle mid-2025, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, LNS Quick Load Servo 65 bar feeder, serial no.: 17000 200363, year of manufacture: 2025, 1 mesh box with accessories, 1 stool, !!!Collection: 21st + 26th May 2026!!! Hfodpfx Aoyztgaob Nog

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank cutting height 140 mm at 45° inclination Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m Hfedeb Dkyvepfx Ab Neg inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, available immediately, 12-month warranty - Max. temperature 250°C - Internal dimensions W 1000 x D 1000 x H 1500 mm - External dimensions W 1765 x D 1425 x H 2300 mm - with new Jumo Dicon Touch controller - Drive-in rails for loading the oven - Heating power 36 kW - Own weight: 780 kg - with exhaust connection - Exhaust fan and electric damper can be retrofitted on request - Documentation, CE declaration - Electrically tested with current DGUV measurement protocol Hodpsvk Navofx Ab Nofg Inspection possible in our warehouse by appointment. Oven, ovens, drying oven, kiln, heating oven, heat cabinet, industrial oven, circulating air chamber oven, tempering oven, warming oven, tempering oven, drying cabinet, chamber oven, curing oven, circulating air drying cabinet, circulating air oven

Condition: used, Year of construction: 2014, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 3,400 m³/h, noise level: 71 dB, overall weight: 425 kg, extraction connection diameter: 200 mm, nominal flow rate: 3,400 m³/h, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer this used Höcker Polytechnik VACUMOBIL 200 mobile exhaust system, year of construction 2014. Manufacturer: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jet cleaning (compressed air filter cleaning) The JT version is an upgraded version of the VT (vibration cleaning) version. The JT200-L is ideal for continuous use (CNC, planing line, nesting) Better continuous operation Less maintenance during intensive use Type of input current: three-phase Hfjdpfx Absygw Iqo Nog Negative pressure: 2.900 Pa Volume flow: 3.400 m³/h Overall weight: 425 kg Input voltage: 400 V Suction socket: 200 mm Power: 4 kW Rotational speed (max.): 3,000 rpm Input frequency: 50 Hz We also sell our JT300-L model on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 3,010 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,660 kg, first registration: 11/2024, color: black, suspension: steel, number of seats: 7, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, LG7 LED high-performance headlights, E07 hill start assist, Q10 cross member for trailer hitch, FR8 reversing camera, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat anchorage, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, T68 child safety locks for doors and windows in passenger compartment, Z1M approval M1, IA0 axle configuration 4x2, XO7 Mercedes-Benz Mobilo with DSB and GgD, R2H 40.6 cm (16-inch) multi-spoke alloy wheels, T78 side sliding door rail cover in vehicle color, U98 individual seats in 3rd row, Y10 first aid kit, 804 AEJ X3/1, VL2 velour floor mats, SF6 driver’s seat height-adjustable with lumbar support, RD9 tires without specified brand, H00 warm air duct to passenger compartment, NM5 MB-NA 60 2b with flange, low position, M-speed, C6L multifunction steering wheel, H22 heated rear window, EM7 2 USB ports in rear center console, Z5L POWER STANDARD, Y44 warning triangle, GA2 automatic transmission for electric drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN visible from outside, SZ6 table and illuminated trim elements on backrest, JH3 communication module (LTE) for digital services, X30 registration certificate part II, FQ3 closed glove compartment (passenger side), I5T plastic underbody protection, RY2 wireless tire pressure monitoring on front and rear axle, CK4 grab handle above license plate in vehicle color, 054 AEJ X3/2, CK8 heated steering wheel, XU1 signs / printed materials in German, IG4 standard, SK5 automatic function. We are happy to provide you with an individual financing or leasing offer and will accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage; partial repainting carried out during preparation. No liability for printing or typographical errors. Subject to error and prior sale. ... more on our homepage Hsdpfx Abex S D Ezs Njfg

Condition: used, mileage: 2,996 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,390 kg, first registration: 09/2024, emission class: euro6, color: silver, suspension: steel, number of seats: 5, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, LG7 LED High-Performance Headlights, E07 Hill Start Assist, E2Z MBUX Multimedia System incl. Navigation & DAB, Q10 Crossmember for trailer hitch, FR8 Reversing Camera, E1K Navigation Package, EX8 Navigation Plus, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Mounting, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, T68 Child Safety Locks for Doors and Windows in Passenger Compartment, Z1M M1 Registration, IA0 Wheel Formula 4x2, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T78 Sliding Door Track Cover in Body Color, Y10 First Aid Kit, VL2 Velour Floor Mats, SF6 Height-Adjustable Driver’s Seat with Lumbar Support, RD9 Tyres Without Specified Brand, H00 Warm Air Vent to Passenger Compartment, NM5 MB-NA 60 2b with Flange, Lowered, M-Speed, C6L Multifunction Steering Wheel, H22 Heated Rear Window, JW8 ATTENTION ASSIST, EM7 2 USB Ports in Rear Center Console, Z5L POWER STANDARD, Y44 Warning Triangle, GA2 Automatic Transmission for Electric Drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN Visible from Outside, SZ6 Table and Illuminated Trim on Backrest, JH3 Communication Module (LTE) for Digital Services, X30 Registration Certificate Part II, FQ3 Glove Compartment, Passenger Side, Closed, I5T Plastic Underride Protection, RY2 Tyre Pressure Monitoring on Front Axle. We are happy to provide you with a customized financing or leasing offer and will accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage, partial repainting may have been carried out as part of reconditioning. No liability for printing and typographical errors. Subject to change and prior sale. Click features may include digital extras, which can be fully or subscription-based via MercedesMe, possibly subject to a charge depending on duration. ... more on our homepage Hfedpfx Absydu N Ho Neg

Condition: used, maximum load weight: 30,850 kg, overall weight: 36 kg, axle configuration: 3 axles, first registration: 09/2019, Year of construction: 2019, Equipment: ABS, Kraker CF-200 moving floor trailer, approx. 92 m³, SAF axles, lift axle, air suspension, disc brakes, platform, roll-up tarp, remote control, EBS, ABS Hedoyyt Emjpfx Ab Nsfg

Condition: used, maximum load weight: 28,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, Equipment: ABS, * Kraker 3-axle moving floor trailer CF-200 * approx. 92 m³ * 10 mm floor * Air suspension Hedpfx Abeyyt Hde Njfg * Disc brakes * Wabco Smart Board * SAF axles * Alloy wheels * Platform * Rolling tarp * Lift axle * Remote control * EBS * ABS

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Hfodpfx Asrbqtnob Nsg Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: good (used), Tires, solid rubber tires, forklift tires Hedpfxsyx S N Is Ab Nsfg -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm -Quantity: 1 piece available -Dimensions: Ø 450 x 195 mm -Weight: 31 kg

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 4 pieces -Tire size: 200/50-10 SC 10 RIM 6.50 F -Bolt circle: Ø 113 x 15 mm -Hub bore: Ø 68 mm Hfsdpfsyx Dyrex Ab Nog -Delivery/Price: complete -Dimensions: Ø 450 x 192 mm -Weight: 30 kg/pc.

Condition: used, Year of construction: 2013, mileage: 65,125 km, power: 62 kW (84.30 HP), first registration: 02/2014, overall weight: 4,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 1,500 kg, empty load weight: 3,000 kg, tire size: 215R14C, wheelbase: 1,820 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, power assisted steering, Vehicle location: Bovenden, 1x air suspension seat, cruise control, automatic transmission, frame cover, high beam headlights, rotating beacon. Wheelbase: 1820 mm Hedpjyatfxjfx Ab Nsfg Superstructure: compact sweeper, approx. 7,540 operating hours. Transport speed 50 km/h, mechanical chassis suspension, independent disc brush control, stainless steel suction tube, pressurized water circulation system. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: ready for operation (used), Tuna can filler suitable for round, oval and rectangular cans Hfjdpfx Abswr D Aae Nog Can diameter range round: 50 mm - 100 mm Can height range: 25mm - 62mm Capacity: up to 100 - 200 cans per minute