Used Spindle Machining Unit for sale (84,460)

Year of construction: 2016, condition: excellent (used), Belimed WD 290 Washing machine / cleaning and disinfection unit This device, made of stainless steel – with an exhaust air condenser (option with a higher design) – is specifically designed for cleaning laboratory glassware, infusion bottles, production parts, and similar items. The WD 290 is available with two automatically operated, vertically moving full-glass sliding doors for visual inspection during the entire processing cycle. Continuous process reliability is also ensured. The machine itself monitors all relevant performance parameters via an independent process data monitoring system. Loading is done manually through a vertical glass sliding door located on the front of the machine. The items to be cleaned (laboratory utensils, laboratory bottles, etc.) are placed on the loading carrier (nozzle car). The nozzle system consists of two rotating external washing arms (top and bottom), through which the individual media, such as washing, rinsing, and cleaning solutions, are passed. The rinsing medium is located externally and fed in depending on the program selection. The WD 290 is equipped with an electric heater for the washing chamber (22 kW) and the dryer (10.5 kW). The usable interior space of 69 x 63 x 80 cm has a capacity of approximately 350 liters (gross: 430 liters). Tedpfx Ahozrfraomec Operating consumption values: Potable water approx. 40 l/min Hot water approx. 40 l/min Cold water approx. 40 l/min The system is operated via the panel on the front of the machine. English and German are available as operating languages. By default, 9 pre-programmed cleaning programs are stored.

Condition: good (used), Dosing installation bag emptying machine with dosing screw Stainless steel discharge cabinet Stainless steel dosing screw with movable bottom and pneumatic end valve Filter unit for dust extraction during refilling VMA Wekerom Tjdpjwyf U Tjfx Ahmoc See our other advertisements

Condition: like new (used), operating hours: 20 h, functionality: fully functional, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between centers of individual spindles: 32 mm Tsdpfjy At Ndsx Ahmec Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height of the drilling machine: 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6–7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions L/W/H: 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling operations from 0 to 90° - Pneumatically adjustable drilling head angle - Cast-iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast-iron worktable - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment of the machine: - 2 aluminium measuring scales, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport box for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New machine - CE certificate - Robust - Professional Net price €2,950.- Machine shipping not included Packaging included Net prices apply to international transactions and EU customers with a valid EU VAT ID No.

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, 21 spindles, left/right-hand spindles, Todpfx Aez Hxi Eehmec quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Machine ready for operation.

Condition: excellent (used), functionality: fully functional, Complete overhaul 2019 Conveyor Pick-up Threading device Broaching device 4 cross slides pos. 1, 2, 4, 5 Integrated bar feeder Cucchi BLT compact version model MULTI L-6 year 2019 ((diameter 38mm)) Tedpfx Aheya Aq Djmjc Tool holder, cams

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm Tjdpfob Uhrzsx Ahmoc -Weight 274 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MZS21X1 Multi-Spindle Boring Machine – Professional Precision for Furniture Manufacturing The CORMAK MZS21X1 multi-spindle boring machine is a professional solution for woodworking shops and furniture manufacturers that demand maximum precision, productivity, and reliability in high-volume drilling operations. Designed for accurate drilling in solid wood, MDF, plywood, and other wood-based materials, the machine provides complete process control and exceptional repeatability when producing holes for furniture fittings and joinery. Main advantages of the machine Pneumatic drilling head with 0°–90° tilt adjustment – features intermediate locking positions and a 45° reference point for quick setup. 21 working spindles – allow multiple holes to be drilled simultaneously, making the machine ideal for cabinet and furniture production. Mechanical digital position indicator – enables precise drilling height adjustment. 1.5 kW motor – delivers stable power and high operating efficiency. Pneumatic workpiece clamping system – ensures secure material positioning and consistent drilling accuracy. Automatic return of the drilling head – the unit automatically retracts after reaching the preset drilling depth. Adjustable feed speed – allows drilling parameters to be optimized for different materials. Support rollers and aluminum fence – extendable for workpieces up to 3 m in length. Quiet and efficient operation – achieved through precision-engineered components and a rigid machine design. Construction and technology The CORMAK MZS21X1 is built on a rigid steel frame that minimizes vibration and ensures outstanding drilling accuracy. The drilling head can be quickly adjusted to the required angle, while tool changes are simple and efficient. All spindle drive components are robustly mounted to ensure long service life, even under intensive industrial use. The pneumatic system is compatible with standard workshop air supplies operating at 6–8 bar. Tedovuf Rlspfx Ahmjc Precision and work efficiency The machine enables accurate drilling for dowels, hinges, and other furniture fittings in a single operation. With 21 spindles and adjustable drilling position and angle, operators gain exceptional flexibility for complex production tasks. The mechanical position indicator and digital adjustment display allow fast machine setup and significantly reduce changeover times between production batches, improving overall manufacturing efficiency. Applications The CORMAK MZS21X1 multi-spindle boring machine is suitable for: furniture manufacturing plants, woodworking workshops, interior fitting and cabinet production, manufacturers of wooden components, small and medium-sized production facilities requiring fast and repeatable drilling operations. Standard equipment 21-spindle drilling head Pneumatic workpiece clamps Aluminum fence with support rollers Digital height indicator Foot pedal control Complete set of drill holders and tool mounts Optional equipment Dust extraction systems Technical specifications Parameter Value Number of spindles 21 Spindle spacing 32 mm Maximum drill bit diameter 10 mm Maximum drilling depth 60 mm Maximum drilling diameter 35 mm Power supply 400 V Maximum working area 3000 × 2500 mm Spindle speed 2,840 rpm Required air pressure 0.6–0.8 MPa Motor power 1.5 kW Dimensions (without table extensions) 1400 × 1300 × 1400 mm Weight 350 kg

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES Tsdpfxjzwpaxe Ahmsc – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Todpsu Nwzcefx Ahmjc Model: PE 75 Year of manufacture: 1976 Motor: 7.5 kW, 50 Hz, 380V, 3-phase Stock number: 10316

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Tedpfx Ahowcp Enemsc Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz Tjdpfju Rv Ttsx Ahmsc -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Tedpfevxd Ttox Ahmoc Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: excellent (used), Multi-spindle drilling machine SCM Type FM 29/S Todpfsvxtfrox Ahmec 29 spindles Distance 32 mm Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters Tsdpfxjzxc Swj Ahmsc - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 1992, condition: excellent (used), 23 spindles working width 720 mm Tsdek Up Itopfx Ahmec vertical drilling depth 45 mm horizontal drilling depth 120 mm

Condition: excellent (used), ZILLI & BELLINI Automatic Sealing Machine with 12-Piston Filling Unit – Stainless Steel Automatic sealing machine from ZILLI & BELLINI with a 12-piston filling unit, designed to integrate the dispensing of the product and the subsequent hermetic sealing of containers within an automated industrial line. The unit combines a filling system with 12 pistons and an automatic sealing section, allowing both operations to be performed in a synchronized and continuous manner. The piston filling technology is particularly suitable for products whose dispensing requires repeatable volumetric control. Its construction, primarily in stainless steel, along with the complete enclosure of the work areas and the integrated control panel, makes it suitable for professional installations in the food and canning industry. MAIN FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic filler + sealer -Filling unit: 12 pistons -Volumetric dispensing system -Automatic and continuous filling -Automatic container feeding -Synchronized positioning and transfer -Rotary processing system -Dispensing via pistons -Automatic sealing section -Cap feeding / positioning according to configuration -Continuous industrial operation -Construction primarily in stainless steel -Complete enclosure of work areas -Doors with inspection windows -Integrated control panel -Safety guards -Structure on adjustable supports -Integrable into complete packaging lines PROCESS Containers are automatically fed into the machine and transferred to the 12-piston filling unit. The system performs a controlled volumetric dispensing, introducing the pre-set amount of product into each container. Once filling is complete, the containers are automatically transferred to the sealing section. In this second stage, the caps are positioned on the containers, and the corresponding mechanical sealing is performed, resulting in a product that is ready to continue to the subsequent operations in the line. It can be integrated with: -Container depalletizers -Washing / rinsing machines -Product feeders -Cap feeding systems -Conveyors -Weight checkers -Inspection equipment -Pasteurizers -Autoclaves / retorts -Labeling machines -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for canning companies and manufacturers of packaged food products that need to automate the filling and sealing operations simultaneously. The 12-piston system may be suitable for various liquid, semi-liquid, or viscous products, depending on the product characteristics and the specific configuration of the equipment. Container formats, dispensing volumes, compatible products, and the type of sealing will depend on the tooling and configuration currently installed. The combination of ZILLI & BELLINI technology, 12-piston filling, and automatic sealing provides a compact solution for continuous industrial packaging lines. Tsdpfx Ajzxwxfohmsc Machine available for inspection. Additional technical information, formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Tsdpfxezxg Ivs Ahmjc

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Tjdpfx Ahjx Dmnajmec Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: good (used), Machine spindle, precision spindle, double bench grinder spindle, precision spindle for belt drive, belt drive spindle Tsdpov Syp Defx Ahmsc -Manufacturer: DKF, Grinding spindle Precision spindle -Type: 6.251/23 -Speed: max 12500 rpm -Cylinder: Ø 80 x 250 mm -Recession: Cone on both sides, see photos -Number: 4x spindles available -Price: per piece -Overall dimensions: Ø 80 x 350 mm -Weight: 8.8 kg/pc.

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Tsdpsy Emmzsfx Ahmec

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, 4-spindle paper drilling machine, Nagel Citoborma 490, year of manufacture 2000 – 4 drilling heads, type 45, installed for drilling diameters of 2 mm to 14 mm – two drilling speeds – torsion-resistant gantry design for precision and durability – optimal work safety through two-hand or foot operation – stack height 60 mm Tedpfx Ahezw Uzzsmjc – feed depth up to 270 mm, enables drilling of A3 size sheets in double format – feed width 460 mm – easy drilling head and drill bit changeover guarantees minimal setup time

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Tsdpfxsyrrhie Ahmoc Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Tsdpfsxrbihex Ahmsc Weight: 400 kg

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Tsdpfst E Tp Tjx Ahmsc

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Tsdpethuzpefx Ahmsc Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition