Used Spring & Hydraulic Cone Crusher Spring & Compound&Hydraulic Cone Crusher for sale (21,990)

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment Hsdpfx Aowb Hxvonyju - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Hedpfx Anexcimpjyou Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Hjdpfxsxcivde Anyou Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 03161769, saw blade diameter: 700 mm, total length: 14,500 mm, total width: 1,600 mm, type of input current: AC, total height: 1,300 mm, input voltage: 400 V, spindle speed (min.): 2,765 rpm, spindle speed (max.): 2,765 rpm, input current: 23 A, spindle motor power: 7,500 W, Equipment: motor brake, saw blade guard, CNC sliding miter saw with infeed sliding table and outfeed table with lateral ejector. The saw head weighs approximately 600 kg, plus the infeed and outfeed tables, each estimated at 500 kg. Cross-sections: 330x200 mm - 440x100 mm Maximum wood input length: 6,300 mm Maximum wood output length: 6,000 mm Hsdpfx Asz D Ewwsnyju 1 carbide-tipped saw blade installed, plus 3 spare saw blades. Complete machine documentation available, including CE certificate.

Year of construction: 2001, condition: used, functionality: fully functional, Used Paragon Cox H20 vacuum twin-shaft mixer/disperser with hydraulic lift and drive for sale Hodpfx Asz Eb R Aenyju Product-contact parts made of stainless steel Complete with hydraulic system Control cabinet not included Manufacturer: Cox Paragon Year of manufacture: 2001 Product-contact parts made of stainless steel 1 x 3-blade adjustable butterfly mixer (6 mm thick), max. 400 rpm SAI GM2-300 D40J 50 kW hydraulic piston motor 1 x High-speed dispersing mixing head, approx. 1000 rpm Sauer-Danfoss MMF046C 45 kW axial piston hydraulic motor Hydraulic power unit main motor: 30 kW, 1465 rpm, 400/660 V 2 x 210-liter mixing vessels + hydraulic press head Mixer can be hydraulically lifted by approx. 100 cm

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Accessories, as well as the tools and clamping devices shown in the images, are Hedezdvcaepfx Anyju included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Hsdpfxexu N H Ho Anyou

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 270 mm, oil tank capacity: 400 l, total length: 1,200 mm, total width: 1,100 mm, overall weight: 7,500 kg, year of last overhaul: 2026, LAUFFER double-acting hydraulic press, 100/30 tons. The press has been completely refurbished and has not been used. I am also including 400 liters of hydraulic oil, so it is ready for use. For more information and a video demonstrating its operation, please contact the phone number provided. Hjdez Hc A Nspfx Anyju

Condition: used, Year of construction: 2021, Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible. Hjdpfx Anez Da R Eeysu

Condition: used, Year of construction: 2023, operating hours: 4,675 h, 2023 | Kleemann MR 110i EVO2 | Used Crusher | 4675 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 363000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 83 inspection points 80 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good condition of the crusher, an electrical problem is displayed on the dashboard due to a fuse issue. The side discharge belt is damaged. The left rear spring shaft needs to be repositioned. Bolts on the screen hopper need tightening. Significant wear of the crusher's beaters. The walls of the chamber are also damaged. The floor of the loading hopper is cracked. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41305 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Hedpfx Aozzdi Aonysu ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Design: Single-acting -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1670 mm -Piston rod mounting: Ø 80 mm Hodpfx Anjcv Sivoyeu -Cylinder mounting: Ø 80 mm Quantity: 1 piece available -Dimensions: 1850/270/H220 mm -Weight: 318 kg

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation Hsdpfx Anoxaag Ujyou * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display Hjdpfx Anjw U U Svjyeu - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec Hjdpfx Aoi Db Ersnyeu work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW Hsdpfxsznngxo Anyju weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg Hodpjzkl Husfx Anysu dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design Hsdpexaa Ixefx Anyeu - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction Hjdpfxjxaa I Ss Anyju very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German Hodpfoxaa Rgsx Anysu

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment Hodpfx Ajxabwuenysu * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA Hodpsxabd Ujfx Anyeu plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control Hedoxabikepfx Anyou * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm Hedpfexabrfjx Anyeu column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional Options and Accessories = Other - Remote-controlled central locking - Lift axle - Air suspension - Fifth wheel coupling - Spotlights Other - Sun visor = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Hjdpszc Rhcefx Anyeu Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Hodpfxjza U Ems Anyju