Used Srd Stano-/Alone-Line Labeling Machine/Labeling System for sale (84,880)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt Guedpfjyaiyrsx Alxjb

Condition: excellent (used), IM Very good condition. Gjdpfeytc Naex Alxjub

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 2200 kg Gujdevz E Tgopfx Alxeb Total power requirement 44 kw

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Gjdjibh Tkspfx Alxjub Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Gedpfx Alskucxlsxsub Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: excellent (used), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Base unit in stainless steel - Environmentally friendly Concept With the Rosink RFL front loader, we offer you an economical and user-friendly solution – especially suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The system is based on a single-bath system, standard with a rotary table, which can be expanded to a multi-bath system upon request. Within the wash chamber, various programs can run depending on the configuration and requirements, such as washing, rinsing, drying, etc. Features Basic unit in stainless steel 1.4301 Tank with sloping bottom Tanks and wash chamber including cladding and insulation Rotary drive with 4-point bearing Pneumatic lifting door with two-hand safety operation Transport trolley or loading table with stainless steel 1.4301 drip tray Pre-filtration via return filter baskets with usable height Selectable filter element: 200 μm or 500 μm Operating panel at the front with PLC for control (5 programs storable) Flat jet nozzle system entirely in stainless steel 1.4301 Automatic refilling system with bath level control Maintenance and inspection hatches for wash and rinse tanks Technical Data RFL 1650, variable depending on configuration Width: 2900 mm Height closed/open: 2800/4500 mm Depth without/with transport trolley: 2650/4500 mm Grid load capacity: 1000 kg Grid dimensions: 1320 x 1320 mm Grid diagonal: 1650 mm Connection voltage: 400 V, 50 Hz, 3Ph/N/PE Control voltage: 24 V / DC Washing capacity: 750 l Rinsing capacity: 500 l Pump capacity (washing): 7.5 kW at 630 l/min at 4.5 bar Gjdpfxjx Exuqj Alxoub Pump capacity (rinsing): 4 kW at 250 l/min at 5.5 bar Drying capacity: 12 kW Heating capacity (cleaner): 36 kW Heating capacity (rinsing): 27 kW Weight: 3600 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW Guodekdnv Topfx Alxsb - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: Gusdpfstgvgpox Alxjb • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: Guedpfx Alev T Anloxsb • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Durfo D1Z labelling machine, year of manufacture 2015, for self-adhesive bottle labels with inkjet printer for, e.g., best-before date or batch number on the label. Model: D1Z Year of manufacture: 2015 Godpfx Asym Sppelxoub Serial number: AB1699E Operating voltage: 400 V Number of phases: 3 Frequency: 50 Hz VIDEO available on request! If you have any questions or require further information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 2006, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) Guedpfxjw Hykij Alxeb between 2 and 6 production rows digital control puncher press rolls year of build 2006 1 stamping knife is included, extra stamping knives are available for 2250 euro each

Condition: ready for operation (used), Year of construction: 2012, Canol make up pastry line Canolino 5.2 highly specified make-up line for the production of puff pastry, yeast dough and Danish pastry. This Canol Canolino 5.2 is equipped with an independent dough calibrator, ensuring precise dough thickness and consistent product quality. Reliable industrial line suitable for a wide range of bakery products. year of build 2012 length overall: 678 cm  conveyor belt width: 650 mm  independent dough calibrator V/4F volumetric dosing machine with 4 dosing nozzles Gjdpsyhdpksfx Alxeub cutting station guillotine cutting knives, folding shoes etc. PLC control with touchscreen mobile execution on wheels pictures BEFORE cleaning

Condition: ready for operation (used), Year of construction: 2020, A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible. Guodpfx Alouxdhnexsb

Condition: ready for operation (used), Year of construction: 2008, Stations: 6, labeling capacity: 3000-4000/h, labeling: wrap-around self-adhesive labels, container formats: 200ml-750ml, bottle formats: 330l Vichy/Longneck/30cl BNR, running direction: left-right, rotation direction: clockwise. Documentation available. On-site inspection is possible. Guedpsulkutefx Alxsb

Condition: ready for operation (used), A labeling machine in a special design is available. It can apply a continuous label to the top and sides, for example for jams, honey jars and more. The machine has never been used. Documentation available. On-site inspection is possible. Godpfxjwixzfj Alxsub

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Godpfx Ajx Dm D Iolxoub

Condition: ready for operation (used), Year of construction: 1998, A fully automatic rotary labeling machine Anker is available. Labels: body/chest/seal/diagonal strip/neck ring/back, nominal labeling capacity: 7000/h, rotary stations: 8, conveyor height range: 800mm-900mm, conveyor length: 3100mm, bottle types: Euro/NRW/Ale, volume: 330ml. Machine dimensions X/Y: approx. 3750mm/2750mm, operating hours: approx. 14500h. Some small parts and components were renewed in July 2024. Documentation available. An on-site inspection is possible. Gedpfxsyhgnvo Alxjub

Condition: ready for operation (used), Year of construction: 2011, A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible. Gujdpfexqgxlex Alxob

Condition: ready for operation (used), Year of construction: 2006, A Krones labeling system with three labeling units is available. Labeling type: variable, wet glue units: 2, self-adhesive units: 1, max. labeling capacity: 72000 containers/h, gripper bore: 150mm, threaded bore: M8, pitch circle: 195mm. Machine dimensions X/Y/Z: approx. 2550mm/2550mm/2500mm. Documentation available. An on-site inspection is possible. Gsdpfsx E Advex Alxsub

Condition: ready for operation (used), Year of construction: 1984, A cold glue rotary labelling machine Krones is available. Product: wine, bottle formats: 0.75l/1l, labelling capacity: 10000 bottles/h. Includes all format parts and spare parts. Documentation available. An on-site inspection is possible. Expected to be available from February 2026. Gusdpfxjw H Avhj Alxob

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Gedpfx Aljwufzcjxjub

Condition: ready for operation (used), A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible. Gjdsxxl Izepfx Alxeub

Year of construction: 2005, condition: ready for operation (used), Number of stations: 2, format: 10l VdF, 0,7l VdF, 0,2l enlarged-neck bottle. Gusdpfx Alehry Dpexob

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Godpfxsi Atnxo Alxjub

Year of construction: 2016, condition: good (used), Label finishing line PRUDENTE FU 300 Year of production: 2016 Material width max: 330 mm Unwinder with tension control Guodpfx Aljun Nyyexeb Hot stamping unit Silkscreen unit with UV drying unit ( manufacturer UV RAY). Flat die cutting/ embossing unit Rewinder