Used Stack Delivery With Pressing Unit for sale (52,642)

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Hnjdpfoxcimpjx Aaisr Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Year of construction: 2025, condition: new, Singlebeltpress up to 800 kg/h on fresh apples Hnedpfx Aae S Un Doijr including automatic belttensioning and regulatingsystem integrated highpressure-beltcleaning-system inverter for beltspeed Wash&Grinding Unit with 3,0 Kw full stainless-steel construction

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables Hedjza U Sajpfx Aaijnr under efi full service new belt installed on 04-26 via efi Recently, 4 new printheads were replaced (defective solder joints on the nozzles).

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Hnjdpsun Nvbofx Aaijr

Condition: used, Diameter: 3.60 m Height: 10.5 m Flat-bottomed Equipped with a hatch on the side wall and top The tanks were used in the chemical industry Hnedpfx Aaow I R T Njior Four units available.

Condition: good (used), Baumann NUP-650 Paper Stack Lift This machine is in very good condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Hjdpjzur D Isfx Aaienr Load capacity: 650 kg. Pallet/sheet dimensions: 785 x 1150 mm. Documentation included.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Hnodpfxoyil A So Aaijr

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Hsdpfx Aaozr Ha Eoionr Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Hodozq A Ipepfx Aaienr

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Hjdpfx Ajzn Ayysaienr Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufacturer: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. Hnsdpfsmk S Sljx Aaijr We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Hjdpfov Dm Epsx Aaienr Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), Semi Automatic Constant Heat Sealing Bag Machine 300mm heat seal line With foot pedal control Adjustable temperature control for different bag thickness Temperature range 30 to 200 degrees C 220 / 240 volts, 50 / 60 HZ Hnjdpoutg Daefx Aaisr With adjustable bag loader for different bah heights In excellent condition Price € 495

Condition: good (used), Saxon Bag Sealer Stainless Steel With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Hsdpjv Dm Dlsfx Aaisnr Price € 5,950

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor Hnsdpfxeu Smq Se Aaisr

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Hnjdpfxevg U Dxe Aaijr Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V Hodpfx Aeyc H I Seaienr • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Hnsdpfx Aaozcvx Teijr Includes Loadmaster.

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Hnsdortnv Depfx Aaier

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Hsdpfx Aaeyzt Nzsionr Accessories as shown in the photos. Price is for the entire unit.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK Hedpfx Aovkkifeaisnr EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST, WE CAN DO IT WITH ADDITIONAL OFFER

Condition: excellent (used), Year of construction: 2001, operating hours: 24,000 h, functionality: fully functional, WE OFFER AN VERY NICE CONDITION TRUMATIC 5000R PUNCHING MACHINE Hjdpfx Aaovuld Eoisnr WITH COMPLETE AUTOMATION MACHINE WILL BE AWAILIBLE IMEDIATELY

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console). Hedpfouzv Tzjx Aaienr

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm Hedpjv T Ah Ejfx Aaionr

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp Hsdpfjx Hz Dqsx Aaionr