Used Stetter Augers for sale (380)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Nlsdpfxszguf Ss Aa Ioc Lighting Guarding

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Nodpozd Dfijfx Aa Ijlc Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Nljdozc Ih Tspfx Aa Ijc

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Diameter 270mm Length 2400mm Motor power 2.2kW Entirely stainless steel Nlsdpfswyf N Dex Aa Ijc See our other advertisements.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min • Monitor: 19" Touch Screen • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Additional equipment • Remote electronic handwheel • Auger-type chip conveyor Nodpfezgf Htox Aa Ijlc • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] Nledpfxsuhbubs Aa Iec - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: ready for operation (used), Year of construction: 2023, Sale only to commercial customers. The purchasing company must disclose its ultimate beneficial owners, and the individuals signing the agreement must undergo postal identification or have their ID photographed on site. The price applies to one (1) earth auger and one (1) compressor!!! A total of two sets are available for sale, each consisting of one Grundomat earth auger and one compressor. In addition, each set includes one 4 mm pull rope (15 m), one PVC pipe clamp, one compressed air hose (15 m), one fog lubricator (3.3 L), and one Grundoscope including a 2 m guide rod. Nsdpfszgb Elox Aa Ijlc The items can be inspected on site by appointment, and the compressors can be tested.

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 6290309, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, Model X 3100 - HEIDENHAIN iTNC 530 path control - Max. spindle speed 4,000 rpm - Table length 3,600 mm - Table width 1,050 mm - Max. table load 8,000/13,000 kg - Y-axis 1,250 mm, extended travel - Z-axis 1,600 mm, increased column height, vertical travel 1,600 mm - Table extension to 1,050 mm - Universal automatic milling head A 4, universal bi-rotating automatic milling head Nsdpfjxp I Swjx Aa Iolc - Vertical tool changer, 24 positions, incl. spindle orientation - CTS (coolant through spindle), 2 pumps - Preparation for 4th axis - Full-width chip augers front and rear - High-performance hinged belt chip conveyor - Full machine enclosure

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Nlodpfjzdrufjx Aa Ioc

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Nljdpfxezcf Dlo Aa Ioc Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, mileage: 210,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep Orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service Increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * All-wheel drive Permanent * Mercedes Powershift 3 transmission * Auxiliary drive for tipper pump * Meiler three-sided tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assistant * Differential locks * leaf-sprung suspension * Rotating warning lights * electric windows and mirrors Nedpfxjzfyddo Aa Ielc * Air conditioning * Auxiliary heater * Tire size front axle 385/65R22.5 * Tire size rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high-position on the right side of the vehicle * Mounting system A * Küpper-Weisser single-chamber spreading machine Type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Auger conveyor system * Spreading material distributor "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tanks capacity 2240 l * Drive via the vehicle's municipal hydraulics * Drop-off system RollTec 12 t * Control "Vpad SN" * Snowplow Schmidt TARRON MS 34.1 * including mounting devices * all from year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper blade combination * Splash guard (rubber) * Adjustable snow dust guard (fabric) * Plow lighting * and more * Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2011, YEAR OF PRODUCTION: 2011 Technical specifications. - Basic machine Longitudinal stroke X = 700 mm Vertical stroke Y = 650 mm Transverse travel Z = 700 mm Nlsdpfx Aouz Urpja Iec - Tool magazine with 295 tool places HSK A63 - Continuous rotary table at 360,000 divisions 65 rpm - 7-position multi-pallet from mm.500 x 500. Rotation footprint dia. 800 mm. - Allowable load on each pallet table kg 550 - No.01 Operator's station for loading/unloading workpieces - Spindle speed = 12,000 rpm - Refrigeration unit for conditioning the spindle cartridge - Spindle with provision for coolant supply through tool flange - Air-conditioned electrical control unit with air conditioner - Ecological protection working area and machine - Lamp for work area lighting - Scraping chip conveyor with rear exit - Chip evacuation augers - 750-l coolant collection tank with self-cleaning filter system; - Sealed top guard prepared for connection with centralized fume extraction system - CNC FANUC 16 I Options included - C301 Piece Washing - C303 Tool Cone Washing - C410 Tool Monitor MCM - C305 Oil Remover - C333 Automatic coolant filler - C308 High pressure 65 Bar - C403 Tool Presence Control By Laser - C412 Balluff read/write system with JTERM-01 - C408 Marposs radio-frequency touch probe MIDA T36 - jFMX MCM supervisory system including Network Part Program

Condition: excellent (used), Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm Nodpfjzdup Ejx Aa Ijlc -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available Price: per piece -Dimensions: 5460/2090/H2180 mm -Weight: 2180 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,080 h, Caterpillar 303.5E CR Profi mini excavator in a complete set with 3 buckets. For sale is a powerful and compact short-tail swing mini excavator from Caterpillar’s absolute premium class (model 303.5E CR) from the well-maintained machinery inventory of Fischer Bau GmbH. The CR design (Compact Radius) means that the rear barely extends beyond the width of the tracks, making the machine an ideal partner on tight construction sites, in landscaping and gardening, and for foundation work. The excavator is in a clean, immediately ready-to-use condition. All hydraulic functions operate powerfully and precisely, the tracks have excellent grip, and the cab offers excellent working comfort. Extensive bucket and equipment package included: 1x CAT 303.5E CR mini excavator with fully glazed comfort cab 1x Robust quick coupler (enables quick tool changes) 1x Wide, hydraulically pivoting ditch cleaning bucket (slope bucket) 2x Heavy-duty deep digging buckets with robust digging teeth (various widths for foundations/trenches) Njdpfxezg Dxzs Aa Ijlc 1x High-capacity dozer blade Technical data & highlights: Manufacturer: Caterpillar (CAT) Year of manufacture: 2019 Operating hours: 1,080 Model: 303.5E CR (Compact Radius / Short-tail swing) Distributor: Zeppelin CAT Undercarriage: Robust rubber track undercarriage with very good tread Hydraulics: Additional hydraulic circuits (additional piping) on the boom for easy attachment of equipment such as demolition hammers or earth augers. Cab: Comfort driver’s cab with excellent all-round visibility, windshield wiper, roof window, ergonomic joystick controls, and a clear digital control panel. Legal information & terms of sale Seller: Commercial sale by Fischer Bau GmbH. Invoicing: The stated selling price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown – ideal for businesses (input tax deduction possible). Warranty information: For companies / entrepreneurs (B2B): The sale is made with complete exclusion of any warranty, guarantee, and liability for defects. Inspection & test drive: Sold as seen and tested. A detailed inspection and a test drive/function test on our premises at Weissenbach 153, 8967 Haus im Ennstal are possible after prior appointment arrangement.

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW Nledoy Nzxgjpfx Aa Isc - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Nlsdsrkn Iiopfx Aa Ioc Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light Nlsdpfsrg Htpjx Aa Ioc

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Nsdjrhi Rkopfx Aa Ijlc Automatic power-off system Alarm light & work light

Condition: used, Year of construction: 2023, functionality: unexamined, Mespack H-140S powder sachet machine (2023) 5g-100g, up to 100 sachets per minute Nedpfxezbc Ews Aa Islc With hopper, auger and ICE Zodiac printer

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, Nljdpeq R Tnzefx Aa Ijc 16 station ATC, swarf auger.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, year of last overhaul: 2024, very good condition, regular service done production capacity 400kg/hour complete briquetting line (RUF press already sold), INDIVIDUAL MACHINES (price: x 1000 eur) : dryer 35 crusher / knife mill - 7 wood waste boiler 5 feeder auger 6m 6 m 3,8 belt conveyor 2 pcs 2 Stk. 2,7 sorter with hopper 4,5 screw conveyor 6 pcs 6 Stk. 6,4 exhaust fan with cyclone 1 hopper with drive 2pcs 2 Stk. 6 wrapping machine 3,5 wet sawdust tank 1 Njdpfx Asxu Ryuja Ijlc fuel tank 1

Condition: excellent (used), mileage: 185,213 km, power: 338 kW (459.55 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Adaptive cruise control - Power brake booster Nsdpfxjzcvvxs Aa Islc - Air conditioning - Air-suspended seats - Radio/CD player - Beacon light - Sun visor flap - Xenon lighting - Power take-off (PTO) = Remarks = 6x4 Euro 6 Leaf suspension Automatic transmission 185,218 km I.C.M 2-axle mixer trailer Schwing Stetter Auxiliary engine 12 m³ BPW axles Belgian registration In very good condition! Ready for immediate use = Further Information = General Information Usable material: Concrete Axle configuration Suspension: Leaf springs Front axle: Steered Weights Unladen weight: 9,786 kg Payload: 16,214 kg Gross vehicle weight (GVW): 26,000 kg Functional Superstructure make: ZF Maintenance, History and Condition APK (General Technical Inspection): valid until 08/2026 Technical condition: very good Visual condition: very good

Condition: used, functionality: fully functional, fuel type: electric, color: white, axle configuration: 4x4, operation weight: 3,800 kg, empty load weight: 3,800 kg, fuel: electricity, Year of construction: 2012, Equipment: all wheel drive, Ice Resurfacer: + Euroglass Dupon Sport + OKAY 3500 Elektra Nlsdpfxezd Ab Aj Aa Iec + Year of manufacture: 2012 + Fully electric + Unladen weight: 3,800 kg; permissible gross weight: 6,000 kg + Wheel motor drive 4x4 + Max. speed: 15 km/h + Blade / auger / side brushes + Snow tank with forward tilting function + Water tank with pump and distribution pipe + 80-volt batteries + Charger Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale!

Condition: excellent (used), Year of construction: 2008, HAAS SL20 CNC lathe with C-axis Year: 2008 Technical details: HAAS control Maximum turning length (Z-axis): 610 mm Maximum turning diameter over bed: 262 mm C-axis with driven tools Spindle power: 14,7 kW Vector Drive Spindle bore diameter: 51 mm Max spindle speed: 4000 rpm Number of turrets: 1 Number of tools in turret: 10 Spindle nose A2-6 Tailstock Weight approx. 4800 kgs Dimensions (L x W x H): 2600 x 1700 x 1800 mm Accessories/options: - C-axis and driven tools Nljdjzf Rrrspfx Aa Iec - Static tool holders - Driven tool holders - Servo bar barfeeder - Swarf auger - Coolant system - Tailstock - Tool measuring arm - Hydraulic 3-jaw chuck - Collet type chuck - Foot pedals Dust extractor is not included.

Condition: excellent (used), Year of construction: 2007, Quaser MK603HPD horizontal machining center, 2-pallets Year: 2007 Technical details: Work range Pallet size (mm) 500 x 500 Max. work swing diameter (mm) Ø680 Max. work piece height 710 Table load capacity (kg) 500 Travel X / Y / Z (mm) 710 / 610 / 610 B-axis minimum indexing (degree) 0.001 Table surface to spindle center (mm) 105 ~ 715 Position accuracy With Linear encoder X/Y/Z (mm) 0.004 Tool changer Tool selection Random Magazine positions 60 Max. tool diameter w/o adjacent tool (mm) Ø80 (Ø150) Max. tool length (mm) 350 Max. tool weight (kg) 10 Tool to tool time (sec.) 1.5 Chip to chip time (sec.) 4.9 Pallet changer Number of pallet 2 Method of pallet changer Swing Arm type Pallet change time (sec.) 8 Pallet changing repeatability (mm) 0.008 Control Fanuc 18iM-B Main spindle 15000 rpm , direct coupling SKF Heavy duty & high speed Coolant system Coolant tank capacity (Liter) 580 (200+380) - Nozzle coolant pump capacity 60 L/min - Through spindle coolant pump capacity 25 L/min. , 20 bar - Wash down pump capacity 60 L/min. - Celling wash down pump capacity 60 L/min. Machine size Height (mm) 3100 Floor space W x D (mm) 3675 x 4510 Weight (kg) 13000 Accessories/options: - Spindle oil chiller - 60 position tool magazine - 2 pallet station - Linear encoder (Absolute 0.0001mm) - Coolant system - 20 bar through spindle coolant - Celling wash down coolant Nlodpfxjzf Rp Rj Aa Ioc - Base, Saddle wash down coolant - Coolant wash gun - Chip augers (2 sets) - Chip conveyor - Work light - Machine status light - CE & EMC Tool holders and clamping plates which shows on the pictures are not including.