Used Stripper/Casing Separator for sale (8,039)

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Nsdpsyf Atpsfx Ac Howk Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Drain line required: 2 Series: TSC.134.015

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers an enormous throughput with its 4 shafts! Ideal for mixing and shredding, it aerates material, suitable for compost and liquid soil. High throughput even with wet soil. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 – 95 m³/hr Leakage oil connection required: 1 Series: TSP.154.131 Nwsdpeyf Au Tjfx Ac Hsk

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Nedpfx Acoyf Avdo Howk Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Year of construction: 2018, condition: new, functionality: unexamined, – For removing foreign matter from municipal and industrial sludge and from process water – Continuous screening, dewatering, and discharge of foreign matter in a single operation - Compressor for compressed air generation - Electrical technology, Strainpress control and switchgear panel Process data: - Sludge type: digestate from wet anaerobic digestion of biowaste - Sludge quantity: expected 8–10 m³/h - Solids content in feed (average/max): 4–6% DS (dry solids) - Screen/slot size for preliminary screening: 12 mm Performance data: - Number of machines: 1 (1 in operation/0 standby) - Throughput per machine: expected 8–10 m³/h - Solid throughput per machine: 4–6% DS Nsdpfx Aeyvhr Hoc Hswk

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Nwedpfx Ajyvrzxec Hok Series: 252

Year of construction: 2000, condition: new, Separation screen ALLGAIER ARSM 31-2, suitable for screening, separation, and recycling. Nwsdpfox Hh H Ejx Ac Hjk

Condition: used, Year of construction: 1986, machine/vehicle number: 246, manueller Deckenherstellung - manual Casemaker Schmedt PräDeckYear 05-1986 - Serial-Nr. 246 Online-Video-Inspection by Skype-Video Nwsdpfeh Axi Rox Ac Hsk We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, We are offering a used drive-through floor scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing surface dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICES Price: €695.00 net per unit Nwsdsy Ep Thepfx Ac Hok Price: €825.05 gross per unit incl. VAT YOUR CONTACT PERSONS AT OUR COMPANY: Tanja Henkelmann Rainer Nürenberg Oliver Kopp PAYMENT TERMS Payment conditions are to be agreed in case of order. The price is per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, steel mezzanine floors, textile warehouses, as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) Nwodpfx Aoyym Ubec Hek - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: reconditioned (used), Manufacturer: Provisur / Beehive Model: RSDD-04 Type: Separator Dimensions: 2150 x 700 x 1650 mm Power: 21 kW Nwodsy Akhdepfx Ac Hjk Power supply: 400V 50Hz 3N Sieve hole diameter: 1 mm Material: Acid-resistant stainless steel Machine renovated and ready to work.

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip Nodpfx Aszhwu Eoc Hewk - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: new, The split separator has a diameter of 900 mm and can be supplied with sound insulation on request. Nwedsvuku Nspfx Ac Hek Drive electric motor 0.75 kW

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: Nodpfx Acjyidvde Howk - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Nedjua Tbwopfx Ac Hjwk Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 2012, condition: excellent (used), For sale is a case packer from pulsotronic, in very good condition, manufactured in 2012. Nwodpjzru A Iofx Ac Hsk

Operating hours: 240 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: MSB14, Machine fully disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, the bevel gear set, among other components, was replaced with new and original parts, and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Effective capacity: between 500/1,000 l/h, as measured during testing with your processed product; capacity may vary considerably depending on the percentage of solid residues present in the product to be treated. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Drum volume: 6.9 l – sludge chamber: 3.9 l - Drum speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly - New electric panel with 11 kW inverter-controlled power section and PLC-operated discharge control section, inside stainless steel housing The inverter enables smoother operation and significantly reduces power consumption and maintenance\. Nwjdpfx Acjxvrfne Hok - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, to ensure consistent flushing - Flow indicator - The machine is mounted on a heavy-duty base with four M20 anti-vibration mounts in square profile steel.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Nodszu Aibopfx Ac Hswk Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Nedog Rxhgepfx Ac Hjwk

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Nodpfxozuxt As Ac Hswk Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, mileage: 380,221 km, power: 120 kW (163.15 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 18 m³, loading space length: 4,300 mm, loading space width: 2,040 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 110 ----Special equipment: * Air conditioning system, regulated (Tempmatik) * Speed limiter (cruise control) * Multimedia system MBUX (7'' touchscreen) * Sörensen tail lift * Wheelbase: 4,325mm * Load compartment dimensions: L: 4,300mm W: 2,040mm H: 2100mm * Payload: 908kg * 2nd battery (auxiliary battery) in engine compartment * Airbag, passenger side * Hill start assist * Exterior mirrors without integrated turn signal Nwjdpjzu D Acofx Ac Hok * Battery disconnect switch, 1-pole * Passenger-optimized gear selector console (without storage compartment, center console, right) * Suspension: Level II stabilization * Connector strip for electrical connections (driver's seat box) * Instrument cluster with color display * Fuel tank with misfueling protection * Radiator grille frame in vehicle color * Loading package, dashboard (USB ports and 12V socket additionally) * Windshield wipers with rain sensor * Seatbelt system with warning system (passenger side) * Seats in the cab: double passenger seat * Seats in the cab: comfort suspension seat, driver's side * Fuel tank cap, red * Separating relay for additional battery * Rear wall paneling * Front axle reinforced * Heat-insulating glazing (windshield with band filter at the top) ----Standard equipment: * Storage compartment above the windshield * Storage compartment below the dashboard, passenger side * Towing eye, rear * Adaptive brake light * Airbag, driver's side * Anti-lock braking system (ABS) * Traction control system (ASR) * Drive type: rear-wheel drive * Indicator for windshield washer fluid level * Exterior mirrors, electrically adjustable and heated, both sides * Outside temperature display * Brake assist * Headliner in the cab * Automatic activation of headlights * Electronic brake force distribution (EBV) * Electronic stability program (ESP) * Driver assistance system: crosswind assist * Power windows, electric, 2-way * Transmission, 6-speed - TSG (Eco Gear) * Body/superstructure: standard flatbed * Keyless start * Communication module (LTE) for digital services * Fuel tank: main tank 71 liters * Steering wheel (steering column mechanically adjustable) * Headlamp range adjustment * Truck registration * Marker lights, side * Mercedes-Benz emergency call system * Engine 2.1 L - 120 kW CDI CAT * Particulate filter * Wheelbase 4325 mm * Low emissions according to emission standard Euro 6 * Seatbelt system with warning system (driver's side) * Seat cover / upholstery: fabric * Seats in the cab: driver's seat with armrest * Daytime running lights * Absorbent battery, 70 Ah * Service interval indicator Assyst * Immobilizer * Central locking with remote control * Permissible gross weight 3.50 t ----Technical data: * Wheelbase: 4,325mm * Load compartment dimensions: L: 4,300mm W: 2,040mm H: 2100mm * Payload: 908kg * Tire size: 235/65 R16C * Tire tread: approx. 40% - 20% ----German vehicle! 3 units available!!! * €13,999.- net plus VAT * TÜV (technical inspection) / emissions test valid until 07/2027 * In the event of export to third countries or the EU, a security deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only as a general id

Condition: new, empty load weight: 531 kg, maximum load weight: 769 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,330 mm, loading space height: 1,680 mm, loading space volume: 5.5 m³, color: white, construction height: 2,300 mm, working width: 1,850 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, with sandwich body made of PurFerro, 30 mm thick roof/walls, braked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 531 kg - Payload: 769 kg - Interior dimensions: 251 x 133 x 168 cm (L x W x H) - Overall exterior dimensions: 392 x 184 x 230 cm (LxWxH) - Loading sill height: 54 cm - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Walls: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Roof material: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Chassis: ALKO rubber spring axle - Number of lashing eyes: Lashing eye rail inside on the side, incl. 4 lashing eyes - Rear door Yes, single-leaf - Tailgate: No - Tailgate material: - - Tailgate/door function: espagnolette lock, stainless steel - Interior light: Yes, with switch + LED lighting - Supports: at an extra charge Overrun device & brake: Yes, Knott - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Overrun device from ALKO - Floor plate 15 mm thick - Side walls and roof : sandwich construction made of PurFerro, 30 mm thick - core made of foamed polyurethane with a top layer on both sides made of galvanized and polyester-coated sheet steel - sandwich box surrounds are made of anodized aluminium - refrigeration unit (various manufacturers installed, depending on availability) - smooth-running high-performance refrigeration machine with electronically controlled defrosting - 230 volt supply voltage with interior lighting - water-protected control panel with digital temperature display - control range from +2 - + 10 C, - Cooling capacity 1800 watts at + 30 C ambient temperature - Interior light fitted, LED + conventional - Single-leaf rear door - Galvanized espagnolette lock and hinges - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - Support wheel - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nedpfou Hrurox Ac Hewk

Condition: excellent (used), Year of construction: 2016, operating hours: 879 h, functionality: fully functional, Rex vacuum Filler for sausage linking Model RVF 327S Nwodpezu Ncbsfx Ac Hjk Year 2016 Operating hours 879 With 18 mm linking nozzle Holding device for casings Automatic Linking gearbox In excellent working condition

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: Nedpfovnb Tpjx Ac Howk - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet Nwedpfxezvb I Ej Ac Hsk • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: good (used), Flaker Andritz K 1220 Nedpfx Aoxw Eppsc Howk