Used Systemtechnik Hölzer Gmbh Nutzentrenner Low 4233 Rd for sale (76,443)

Condition: used, mileage: 1,073,509 km, power: 309 kW (420.12 HP), first registration: 07/2005, fuel type: diesel, tire size: 315/60, tire condition: 30 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, total length: 5,940 mm, total width: 2,500 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2005, Equipment: ABS, retarder, = Additional options and accessories = - Air Suspension = More information = Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Axle configuration Tyre profile: 30% Front axle: Tyre size: 315/60; Max. axle load: 7100 kg Rear axle: Tyre size: 295/60; Max. axle load: 11500 kg Weights Empty weight: 7.310 kg Carrying capacity: 11.290 kg Kedpfx Aaoy T N Eperjlt GVW: 18.600 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Identification Registration number: BR-GJ-66

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. Kledpfx Aoy S Rw Dearot The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Klodpfsy S Rv Tjx Aarot Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop Kledpfx Asyhxl Rsarst

Condition: good (used), mileage: 148,321 km, power: 184 kW (250.17 HP), first registration: 10/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 8,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 6,920 kg Payload: 5,070 kg Gross vehicle weight (GVW): 11,990 kg Kjdsy Szlfepfx Aarelt Functional Loading platform height: 300 cm Maintenance, History and Condition APK (General Technical Inspection): valid until 01/2027 Technical condition: good Visual condition: good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for more information. = Company Information =

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar Kledpfx Aaey S Rr Uorot VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a 10% promotional discount The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipping mechanism, and powerful lifting function, the dumper is extremely off-road capable, stable, and easy to operate. The machine impresses with its compact design, high load capacity, and a reliable Briggs & Stratton gasoline engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACK DUMPERS Take advantage of our current sales promotion: 10% discount on all track dumper models – for a limited time only, while supplies last! The HT500Y-4 is ready for immediate use and offers a powerful combination of performance, maneuverability, and ease of operation. ⚙️ Technical Data Engine & Drive Engine: Briggs & Stratton Engine Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 HP at 3600 rpm Fuel: Gasoline Fuel Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Weight: 550 kg Skip Volume: 200 dm³ Tilting Angle: 100° Tilting System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Track Width: 700 mm Lifting & Height Maximum Lifting Height: 1020 mm Maximum Tipping Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Undercarriage Track Width: 180 mm Track Contact Area: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Climbing Ability: 20° Rubber Tracks for Optimal Ground Grip ✅ Features & Benefits ✔ Removable protective container ✔ Simple control via operating lever ✔ Foldable standing platform for flexible work ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track undercarriage ✔ Low-maintenance gasoline engine ✔ Hydraulic tilting function ✔ Powerful lifting function for comfortable unloading Application Areas Construction & Renovation Gardening and Landscaping Agriculture Barn & Farm Work Material Transport on Difficult Terrain Work in Confined Spaces Condition & Delivery Available immediately New / unused, from current production Factory-tested, ready for immediate use Europe-wide delivery via freight forwarder possible Kljdpfx Ajyqxw Ijarjt 💶 SECURE PRICE ADVANTAGE Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Benefit from our attractive promotions. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure a 10% promotional discount on track dumpers!

Year of construction: 2006, condition: ready for operation (used), An automatic glass sandblasting cabin is offered. Working range X/Y: unlimited/1500mm, extraction air capacity: 1800m³/h, filter area: 17m², filter differential pressure: 1500Pa, operating principle: automatic surface blasting operation, filter system: cartridge filter unit with pneumatic cleaning, glass transport: vertical roller conveyor system, control: PLC control with digital control panel. Equipped with separate filter unit, blasting nozzle feed unit, water separator, enclosed cabin construction with rubber buffer inlet. Weight: approx. 1550kg, overall dimensions X/Y/Z: approx. 4500mm/2850mm/1650mm. Inspection possible by arrangement. Kedpfx Aey Tn I Asarelt

Condition: good (used), Year of construction: 1999, Approx. 23 units of OTTO hazardous goods containers, 600L, Large Packaging "IBC" – used: Klsdowzyn Dspfx Aarst Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Model: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross mass: 1,090 kg Tare weight: 190 kg With certification as Intermediate Bulk Container (IBC) for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG Code) transport of dangerous goods of packaging groups I, II + III (X rating) * Dimensions per DIN 30741 * Steel container, hot-dip galvanized * With hinged, lockable lid * Lid locks in place by special spring mechanism at any opening angle up to approx. 70° * Container with continuous body, only 2 closures on the front * With forklift pockets, safety hooks for PE bags, type plate and compartment Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: used, mileage: 274,760 km, power: 294 kW (399.73 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 7,450 kg, maximum load weight: 10,550 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,500 mm, next inspection (TÜV): 08/2026, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), intarder, automatic transmission, roof spoiler, side skirts, lift/lower function, differential lock, fog lights, air suspension, aluminum tank, alloy wheels, low-noise G1, roof hatch, green environmental badge. Wheelbase: 3500 mm Former vehicle of the Electro Professional Association! Transmission: 12 AS 2131 DD with intarder, air conditioning, auxiliary heater, 1x sleeper berth! Kljdsyq Ih Nspfx Aaret Matching 2-axle special box trailer -89271- available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Ksdpo R R R Ssfx Aarslt Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C Klsdpfsgl Nlmjx Aarot - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Kedev Rpxljpfx Aarelt Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. Klsdpfjchuvrjx Aarjt including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Ksdpfsgfm Ryox Aarjlt Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: good (used), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h / 400 V Kedpfx Asrb D Njarslt

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. Klsdedwktkepfx Aarjt A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults Klsdpfx Aaeffh Atsret + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) Kodpfx Aaegmfa Ajrslt - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), 7x pallet transport racks, Lützenkirchen – used - : Price per unit: €395 (net), dismantled, packaged, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Kodpfx Aasw Acrujrslt Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Cutting width – 250 mm Motor power – 3 kW Rotor speed – 100 rpm Number of rotor blades – 20 pieces Kjdjyf I Tbjpfx Aarelt Number of stator blades – 2 pieces 8 units available, in perfect condition Capacity up to 50 kg/h Price: 1350 EUR per unit

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Kodpfx Ajx El A Usarolt Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet Kjdpfx Aajuud Irorjlt 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Year of construction: 2006, operating hours: 5,840 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6398921, Please state your offer price. Sale only within Europe, including Turkey. Kljdpfoy Ta Aljx Aarst Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations.

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Kljdpfxji Huzxo Aarjt Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition