Used Temperature Control Device 8-Fold for sale (75,316)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. Nljdpeg Ewwrofx Agrsg *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Nedeyrncijpfx Agrelg Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Nljdjzdr Edjpfx Agrjg Weight: approx. 920 kg Type: TS 1800 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, A Wittmann temperature control unit is for sale Medium: water Heating capacity: 7 kW Cooling capacity: 56 kW Nsdpfxsxx R Sxj Agrolg Operating temperature: max. 90°C

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Nedpfjy Su A Rox Agrelg

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Nlsdpfx Aeyk Tnnegrog Model: TP-PLUS-2:90 Incomplete

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Nljdpjy Suavjfx Agrsg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 220 mm, total length: 825 mm, total width: 575 mm, type of input current: AC, control voltage: 220 V, DGUV certified until: 07/2027, Jufeba temperature control unit Tabletop model: TG 2-2 T Stainless steel design Dry heating Nlsdjt U Uxuopfx Agrog Simple temperature control Top-quality technology Connection: 230V, ready for plug-in Dimensions: 575 x 825 x 220 mm (W x D x H) Used unit, cleaned & SAB inspected Many other temperature control units in stock!

Condition: used, machine/vehicle number: 45208, Markiereinrichtungen für Falzmaschine - Marking Device for Folding Machine Stahl MKE 86Serial-No. 29903/86 - 115148 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nledoh Ax Rbjpfx Agrsg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Panel-mounted measuring instrument, panel-mounted measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring instrument, control panel, temperature measuring device -with: Measurement and control technology type M19 Nedpfjfcqrrsx Agrjlg -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Nlsdpfx Aey Su Aqjgrog

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Nsdpfx Agsy Su Adjrslg

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology Nledpshgr Ihjfx Agrsg The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/ Njdpfx Agofuw Nperslg -Dimensions: 265/145/H145 mm -Weight: 3 kg

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Njdpfxjyrtk Ss Agrslg Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: used, Manufacturer: TOOL TEMP Nledpfeylaatjx Agrjg

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Nledpex Emfwjfx Agrsg Heat transfer medium: Water

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Njdpfx Agsy E Hzrjrslg Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Condition: excellent (used), LAUDA LTH 303 Temperature Control Unit / Heating Unit for Tool Temperature Control Njdezpxcyspfx Agrolg We have 3 LAUDA LTH 303 temperature control units for sale, all in very good condition. These units are ideally suited for temperature control of extrusion tools, nozzles, calibration dies, injection molds, and a wide range of industrial applications. All units are fully functional, immediately available, and can be inspected at our facility in Wuppertal at any time. Technical Data * Manufacturer: LAUDA * Model: LTH 303 * Year of Manufacture: 1990 * Heat Transfer Medium: Oil * Max. Supply Temperature: up to 350 °C * Connection Voltage: 220 V * Heating Power: 3.2 kW * Frequency: 50 Hz Features * Digital temperature display * Integrated circulation pump * Compact, robust industrial design * User-friendly control * Ready for immediate use

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Nedpfx Agsdmn E Herelg

Condition: good (used), Year of construction: 2007, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit Nedpeiyzn Dsfx Agrolg -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Nljdpfxsx Emd Ts Agrog Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, functionality: fully functional, overall weight: 3,000 kg, operation weight: 3,000 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space volume: 18 m³, loading space width: 2,000 mm, loading space length: 3,000 mm, loading space height: 3,000 mm, Year of construction: 2022, operating hours: 2,000 h, machine/vehicle number: K22092001, ## Complete Nitrogen Generation System – Generator + High-Pressure Booster + Chiller For sale: a complete industrial nitrogen generation and high-pressure supply system, designed for use with high-power fiber laser cutting machines. The system allows nitrogen to be generated on-site and supplied to the laser at the required high pressure, significantly reducing dependence on liquid nitrogen deliveries. ### Complete system includes: * Nitrogen generator * High-pressure nitrogen booster * Industrial chiller / cooling system * Control system * Filtration and necessary system components ### Technical specifications: Nitrogen generator * Nitrogen purity: up to [99.99%] Nsdpjzv T Absfx Agrjlg * Nitrogen capacity: [30 Nm³/h] * Outlet pressure: [8 bar] * Automatic operation High-pressure booster * Maximum nitrogen pressure: [200 bar] * Capacity: [25 Nm³/h] * Designed for continuous industrial operation * Suitable for fiber laser cutting applications Chiller * Cooling capacity: [XX kW] * Designed for cooling the nitrogen booster/system * Industrial continuous-duty design ### Application The system was used for supplying nitrogen to a high-power fiber laser cutting machine. Suitable for laser cutting of: * Stainless steel * Aluminum * Carbon steel and other materials where high-pressure nitrogen cutting is required The equipment is sold as a complete system. Condition: Used, fully functional Location: Lithuania Availability: Immediately available The system can be inspected and tested on site. More photos, videos, and detailed technical specifications are available upon request. Worldwide transport can be arranged.

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Nodog Ixumjpfx Agrslg Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A

Condition: ready for operation (used), Control Techniques SE43401500 SE 22T Commander frequency inverter, serial number 3960768008 / the cover is loose and has minimal damage, see pictures!! Used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfx Ajzzurzegreg