Used Tsi Multi-Function Ventilation Meter for sale (29,282)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Kdedjyzvmcjpfx Ai Rer Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 660-2,910 mm Width 1,960 mm Forks 1,200 mm ID OS1947

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2026, emission class: euro6, color: red, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony Kdsdozc Dg Eopfx Ai Rjr * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Kdsdpfjycf N Ijx Ai Rer

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork Load centre: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: Good Kedpfxsyi I R Ie Ai Rsdr Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 560-2,450 mm Width 1,800 mm Forks 1,200 mm ID OS1842

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Kedpfx Aezaqp Usi Redr Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: used, mileage: 79,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,440 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Beautiful and well-maintained VW T6 L1 4Motion / All-Wheel Drive van, optimally equipped, ideal for trades and businesses. Workshop/shelving system from Sortimo and electrical installations (details below). Rear wing doors All-wheel drive (4Motion, 4M, 4x4, 4WD) Underride protection for engine/transmission made of plastic GVWR 3.2 t (including reinforced 16" steel rims) Trailer hitch with 2.5 t towing capacity LED lights (low beam + high beam) retrofitted Auxiliary heater (water-based), programmable and with remote control Heated driver's seat Climatic air conditioning with activated carbon filter 3 seats, double passenger seat with foldable storage surface Comfort driver's seat with foldable armrests, adjustable in multiple ways: seat height, backrest, lumbar support Seat covers made of Simora fabric Driver assistance systems: - PDC Park Distance Control front and rear, optical + acoustic display - Surround view system (Front Assist) with City Emergency Braking - ACC Automatic Cruise Control (automatic distance control) - Cruise control (adaptive) with automatic distance control ACC and speed limiter - Fatigue detection - Hill start assist - Trailer stabilization - Tire pressure monitoring - Brake assistant (HBA) - Multi-collision brake - ABS, ASR, ESP, EDS Light and Visibility Package - Automatic headlight activation - Automatic windshield wipers Leather multifunction steering wheel - Automatically dimming interior mirror Composition Media audio system (radio/CD player, MP3 playback function) - Radio - CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multi-function display Plus / On-board computer Driver and passenger airbags Electrical Package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights Spare wheel and jack 2nd battery with separation relay 2 x 12V socket in the cab Heated windshield washer nozzles Wheelbase 3000 mm Sliding door on the right side of the cargo compartment with tinted glazing Rear wing doors with tinted glazing, heated, with wiper system Truck registration N1 Engine 2.0 L - 110 kW TDI 6-speed manual transmission Kdsdpfozvhy Uox Ai Ror Steering wheel adjustable in length and height Heat-insulating glass Cargo area equipment: Workshop installation from Sortimo (similar to Aluca, Bott, Würth). Shelving systems on both sides with shelf compartments, storage compartments, holders for small parts containers (without containers) and drawers (5x). Extendable workbench. Cargo area partition with window. Robust wooden floor. Load securing through mounting rails. Walls (with plastic panels) and ceiling covered. LED lighting. Ventilation and air conditioning. Electrical systems: 230V voltage converter/inverter, powered by an auxiliary battery. 4 x 230V sockets with fuses. Cargo area dimensions: - Length at the bottom: approx. 244 cm - Length in the middle: approx. 225 cm - Length at the top: approx. 220 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 with approx. 5 mm tread depth in the front and approx. 4 mm or approx. 6 mm in the rear Additional tires: Summer tires 205/65 R 16 with approx. 4/4/5/5 mm tread depth Service history (from leasing documents): 06.2021 / 22,700 km Longlife inspection 08.2022 / 35,184 km Longlife inspection + Service 1 07.2023 / 47,977 km Longlife inspec

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Kedpfx Aijzu Akrs Rodr Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £55,000 plus Vat where applicable. Sold Ex Works Kdjdpfx Aiezic Tpo Rsr

Condition: used, functionality: fully functional, Year of construction: 2017, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, HP Multi Jet Fusion 4200 additive manufacturing system, tested and fully functional. An industrial solution for the series production of end-use parts in PA12 nylon. THE SYSTEM INCLUDES: - HP Jet Fusion 4200 printer - HP Processing Station (powder processing station) - Build Unit(s) MAIN FEATURES: - Technology: Multi Jet Fusion (MJF) - Build volume: 380 × 284 × 380 mm - Material: PA12 (nylon 12) - Production of short and medium series of functional end-use parts - Year of manufacture: 2017 Ksdpfx Aey U H Idoi Rjdr - Three-phase power supply APPLICATIONS: industrial, automotive, medical (prosthetics and orthotics), consumer goods, on-demand spare parts. Equipment from a professional service bureau. Available for pre-purchase inspection. Location: Spain. Loading and transport can be arranged. Please inquire about the detailed inventory of Build Units, consumables, and the included powder stock.

Year of construction: 2025, condition: used, functionality: fully functional, This is a glasswashing machine from the manufacturer Hobart, model GXCROI-10C, manufactured in 2025. This compact professional dishwasher is equipped with an integrated osmosis system and a base unit for empty racks or detergent, as well as suction lances for monitoring the fill level. The glasswashing machine has been inspected in our in-house workshop and is fully functional and in near-new condition. The list price of the machine in this configuration is €13,285.16 (gross). You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3 Technical data: External dimensions WxDxH: 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year of manufacture: 2025 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, inspected and fully functional Kdedey Uvuaspfx Ai Rjr Base model: Front-loading machine Theoretical capacity up to 60 racks/h, 2,160 glasses/h 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-Save Automatic self-cleaning program Wash pump with soft start Integrated WLAN module Completely ready for connection: inlet and outlet hoses, connection cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Multi-phasing: Machine can be switched from 400 V to 230 V on-site Shock-absorbing door with self-closing mechanism Tank, sump, cladding made of CrNi steel 1.4301 Universal glass rack 00-378814-000: 500 x 530 mm With base unit: 435 mm high, with removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm Self-cleaning washing system VISOTRONIC-TOUCH control SmartConnect app SENSO-ACTIVE resource management CLIP-IN washing and rinsing system Intelligent data storage USB interface GENIUS-X2 fine filter system Cold rinse Intensive program Screen insert control Optional fill level indicator Hygiene program in combination with the Hygiene Tab INTENSIVE Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 4,500 kg, Multi-pallet fork Ksdpfxew Erf Aj Ai Rjdr ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 4A (61 cm) Capacity 4,500 kg Sideshift Opening range 560-2,760 mm Width 1,980 mm Forks 1,150 mm ID OS1638

Condition: used, Year of construction: 2017, load capacity: 3,000 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 Capacity 3000 kg ISO 3A (51 cm) Sideshift Opening range 560-2285 mm Width 1630 mm Forks 1150 mm ID OS1175 Kdedot T E T Hepfx Ai Rer

Condition: used, mileage: 66,255 km, power: 75 kW (101.97 HP), first registration: 11/2017, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1348. H072446 ----EQUIPMENT * Seating configuration – 5. Armrests: Armrest for left seat in cab Kdedpfxey N Ifgs Ai Rsr * Front seat row: Double passenger bench seat on the right, 1st row with headrest, height-adjustable * Electric package I – Exterior mirrors, electrically adjustable and heated – Power windows, electric * Rear wing doors without windows – Mechanical locking/unlocking of the tailgate/wing door with interior release function * Partition walls: high partition wall with fixed window and 8 reinforced lashing eyes for load securing * Lashing eyes for load securing, reinforced (ISO 27956) * Seating configuration – 3. Seat adjustment: Height adjustment for driver's single seat in cab * Air conditioning "Climatic" in cab * Seating configuration – 4. Lumbar supports: Manually adjustable lumbar support for driver’s seat (LH) * ParkPilot (rear parking assist) * Radio "Composition Audio" with TFT display (monochrome) – 2 speakers * Telephone: Mobile phone interface * Central locking system with radio remote control and interior operation * Transmission: 5-speed manual * Airbag for driver and passenger – with passenger airbag deactivation – Seatbelt pretensioners for the outer seats * Exterior mirrors: Left aspherical, right convex * Hill start assist * Third brake light * Green tinted heat-insulating glazing * Rev counter * Seat belts: 3-point automatic seat belts, height-adjustable on outer seats in cab * Electronic stability program incl. ABS, ASR, EDS, hill start assist, brake assist * Suspension: 16" chassis with 16" brake system * Flooring: Rubber floor covering in driver's cab * Storage compartments and boxes – lockable glove compartment * Front headrests, height adjustable * Paint: solid color * Multi-collision brake * Non-smoker version, 12V socket and cup holder in dashboard * Upholstery: Fabric, "Austin" design * Particulate filter: Diesel particulate filter incl. SCR and AdBlue tank * Sliding door in passenger/cargo area: sliding door right * Interior paneling: half-height side paneling made of hardboard in cargo area * Power steering with safety steering column, height and reach adjustable * Start-stop system with brake energy recovery * Dust and pollen filter * Daytime running lights – permanently on while driving * Internal step in cab and cargo area * Lashing eyes for load securing * Electronic immobilizer * Registration as “closed van”…and much more. ---- Vehicle is in unprepared/unaltered condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing/leasing possible without down payment! Any questions? We are happy to advise you!

Year of construction: 2023, operating hours: 32 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IELE6J18Z047, Isocell Elements air injection plate. Functions perfectly. 10" touchscreen. Kodpfxozbyi Tj Ai Rjdr 20-meter hose included with the machine.

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steamer, model CMP 201, in an electric version, manufactured by the premium brand Rational, built in 2020. The unit features an automatic self-cleaning program! The combination steamer has only 982 operating hours. The combination steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow, and cooking time. Ksdpfx Aozmu Akei Rodr Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814161 Year of construction: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam operation: from 30° C to 130° C Hot air operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: prepares pre-cooked and chilled dishes to the optimal serving temperature in an ideal climate. Automatic separation of fat for clean cooking chamber air. Automatic cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food. Ventilated double-glazed door (swivels for easy cleaning). Cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld spray nozzle with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2007, Truck loading crane / loading crane / crane PM series 12.5 Year of construction: 2007 2x hydraulically extendable Equipped with remote control. With 5th function and rotator. Capacities: 2710 kg at 4.2 meters 1800 kg at 6.1 meters 1310 kg over 8.1 meters Cevoman bvba. Lenskendijk 5 Kjdpfx Aiszldrlo Redr 2200 Herentals Belgium

Condition: used, Door panel production line Note: The system started its series production in 2023; at this point, all machines were synchronized and overhauled as needed. Used door panel production line consisting of: Double-end profiler Manufacturer: Kraft Technical data - 2 scissor lift tables - 2 vacuum grippers - Infeed roller conveyor with belt conveyor - New Siemens touch control 13 roller conveyor elements Manufacturer: Kraft Technical data - Driven, approx. 3000 mm each Continuous insert material supply Special insert line HPL - Portal feeding system Manufacturer: Kraft Year of manufacture: 2023 Technical data - For singulating, aligning, and placing HPL Glue application machine Manufacturer: Bürkle Year of manufacture: 1990 Glue application machine Manufacturer: Kuper Year of manufacture: 2018 Lay-down table Technical data - Pneumatic fixing (centered on the center axis) - Device for automatic laying of battens - Fixed stop in the direction of travel, to the left of the timing belt conveyor - Positioning of the battens against the end stop for transfer with the suction system - Servo-motor driven and movable on the Y and Z axes - Uptake of the battens via a suction bar - Vacuum generation via ejector Stapling station Technical data - Servo-motor driven width adjustment of the stapling units, centered on the center axis Kdsdpjzuzh Aefx Ai Rsr - from min. 430 mm - max. 1,300 mm - 4 support brackets for holding the stapling components and guide units - 4 pneumatic guide units for holding the stapling units - and for the feed movement / pressure pad on the Z-axis - 4 feed slides with pneumatic pressure to fix the battens during stapling - 4 stapling units, manufacturer BEA - 2 pneumatic end stops Scoring saw Technical data - 2 units: Saw units at the top (right/left) - For creating ventilation slots - Mounted on a linear axis system for centering on the cutting width manually - Pneumatic feed of the saw units, sensing the center of the upper edge - Continuous multi-daylight press Manufacturer: Bürkle Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 platens with a press area of 1400 x 2800 mm - With automatic feeder, manufacturer Bürkle - Removal device, manufacturer Bürkle Trimming station Technical data - For trimming overhanging edges on the top and bottom of the doors Buffer system Technical data - For intermediate buffering of semi-finished door panels - Total length approx. 14,000 mm - Solid steel construction - Approx. 200 individual compartments Label printer Technical data - Automatic label printer for labeling in-line Storage and transport system Manufacturer: Kraft Technical data - Driven storage and transport roller conveyor - Roller width 1000 mm - Total length approx. 120 meters Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,500 kg, Multi-pallet fork Load centre: 600 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Kjdeyi Nawspfx Ai Redr Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,500 kg Sideshift Opening range 560-2760 mm Width 1,980 mm Forks 1,150 mm ID OS1871

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: OWD/381/2020, feed length X-axis: 5,200 mm, I have an Optymalizerka OWD-1600 Metal-technika machine for sale. It is a very good machine manufactured by a Polish company. The arm movement is driven by a servo motor, enabling very fast and precise cutting. The machine control is based on a Mitsubishi controller (one of the best in the world for machine control solutions). Year of manufacture: 2022. The machine was used as a backup, operating on average for half a shift per day. The machine is connected and ready for testing. Interested parties are welcome to come and see it. I can record videos or send more photos. Price is net. KEY FEATURES SPECIFICATIONS Electronics: Controller with a color touchscreen display "MITSUBISHI" Functions: - Full optimization of 30 dimensions in two quality classes. - Creation of cutting programs for different clients. - Cutting at a point marked with a fluorescent pencil. - Trimming the margin (beginning and end of the input material). - Cutting in batches (several elements at once). Kjdpfx Aiozhltvo Redr - Counters: meters, total, shift, operator, monthly. - Cutting accuracy: ±0.2 mm. - Ability to handle material up to 5.2 m in length. - Table with ejectors. Motor: 7.5 KW (saw Ø500 – 140 teeth) Input material width: 12 - 250 mm max. width/height (250 / 50 mm) Input material height: 20 - 120 mm max. height/width (140 / 120 mm) Input material length: up to 5,200 mm Lubrication: Oil-based central lubrication system Automation at the output: Connection for an inclined conveyor and sorting table.

Condition: used, Year of construction: 1995, functionality: limited functionality, total width: 1,637 mm, total length: 5,805 mm, For sale: a professional, industrial 12-head computerized embroidery machine from the renowned Japanese brand Tajima, model TMFD-C912. The machine is in continuous operation, fully functional, and ready for production in a garment factory or sewing workshop. We have owned and operated the machine for the past 2 years. Throughout this period, it has been regularly serviced and well-maintained, ensuring stable and reliable performance. Due to transportation and relocation, it may require standard calibration/adjustment upon installation at the new owner's site. Technical Specifications (from the nameplate): Manufacturer: Tokai Industrial Sewing Machine Co., Ltd. (Japan) Model: TMFD-C912 - S (450 x 360) + Kdsdpfx Ajzikn Ioi Rsr Number of Heads: 12 Number of Needles (Colors) per Head: 9 Serial Number (MFG. No.): 1112 Date of Manufacture: July 1995 (JUL. 1995) Dimensions & Weight: Length (L): 5805 mm (approx. 5.8 m) Height (H): 1780 mm (approx. 1.78 m) Width (W): 1637 mm (approx. 1.64 m) Net Weight: 2275 kg Electrical Requirements: Power Supply: 3-phase (380 V), 50 Hz Power Output: 1.1 kW / 2.4 KVA Technical & Visual Condition: Condition: Used, very good. The machine is regularly cleaned and lubricated. Functionality: 100% mechanically and electronically operational. As standard for multi-head equipment after transport, a general inspection and fine-tuning by a technician is recommended. Complete thread stands above each head. Original, clear Tajima control panel with diskette drive/connector interface. This machine is perfect for high-volume production of promotional clothing, patches, embroidery on panels, and finished products. Tajima machines from the 90s are famous for their extreme durability, heavy-duty reliability ("built like a tank"), and very high stitch precision compared to modern alternatives.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Ksdpezmrw Sefx Ai Rodr Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: ready for operation (used), functionality: fully functional, type of input current: AC, input voltage: 220 V, Horizontal Pillow Packing Machine – Top Film Feed – Chain Infeed 50 - 150 Bags/Min – USED This listing is for a Foshan Horizontal Pillow Packaging Machine, designed for efficient wrapping of bakery goods, snacks, hardware, textiles, and general consumer items. This model features a top-film-feed system and a chain-type infeed conveyor, allowing smooth product loading and stable film tracking at higher speeds. The machine is used but fully operational, with all major functions working correctly. Please note: some mounting hardware for the infeed conveyor may be missing, depending on your installation requirements. The machine itself is complete, runs as expected, and is ready to integrate into a production line. ✅ Key Performance Features Film Feed Type: Top-film-feed for consistent tension control Infeed: Chain-driven product conveyor Automatic Grade: Fully automatic Driven Type: Electric Voltage: 220V Total Power: 2.4 kW Packaging Function: Heat sealing + forming Film Type: Plastic film (0.03–0.06 mm thickness) Applications: Food | Bakery | Beverage | Textiles | Hardware | General consumer goods Ksdpfxozt Ukhs Ai Rjdr Machine Specifications: Product Type: Multi-Function Pillow Packing Machine / Flow Wrapper Bag Length: 25–220mm Packaging Width: 25–100mm Packaging Height: ≤35mm Max Film Width: 350mm Packaging Format: Pillow-type bags Dimensions (L×W×H): 4000 × 920 × 1500 mm Condition Overview: Used but fully functional Film feed system smooth and accurate Chain-drive infeed operates correctly Cosmetic wear from normal use Some optional/mounting hardware for the infeed conveyor may be missing No major faults or errors during test run Manufacturer: Foshan Packing Machinery Co., Ltd. Origin: China

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Kdjdpfxjx Tuyxo Ai Rer

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials Kdedpfeytrufsx Ai Rjr The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Kjdpozdnplefx Ai Rsdr Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.