Used Tsk Trb 16 for sale (13,148)

Condition: excellent (used), Hydraulic, Plural-Component, Fixed-Ratio Proportioner. For pouring and dispensing sealants and adhesives and polyurethane foam. Lodpfx Amsixzuzsmsac Model number: HFRB-16 AKAKDBH Part No: UC0465 Series: H15B Serial No: N102 Max motor WPR: 83 bar Max outlet fluid WPR: 206 bar Max air WPR: 7 bar Max operating temp: 77 deg C Max ambient temp: 50 deg C Weight: 395 kg 2 pieces

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Laedpfxezd Eyno Ammec Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm Lsdpfszd Duwex Ammoac - Max. tilting of lower traverse: 8 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Central-Axle Tipping Trailer Chassis Welded steel construction, continuous tipping shaft at the rear with 80 mm ball-type tipping bearing Front transmission support leg Foldable rear support 2 wheel chocks with holders Steel underrun protection Rear mud flaps across the entire width Quarter-shell fenders Lockable storage compartment for ramps beneath the loading area 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock Note! The side panel touches the storage compartment when folded down. Lockable storage compartment for ramps beneath the cargo area Towing Equipment for Central-Axle Trailers Towing beam with certified 40 mm tow eye Towing beam height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension SAF drum brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker compensation) Wheels and Tires 285 / 70 R 19.5" as selected by the manufacturer Steel rims in factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to 170 bar max., without throttle valve. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck PTO Hydraulic connection with SVK coupler, size 10/3, including connecting hose Tipping platforms Sturdy tipping platform with 4 mm steel plate floor, steel sidewall structure, continuous sidewalls that are fold-down and pivot-mounted with a central lock at the bottom. Rear corner stanchions are plug-in type. Rear wall folds down and is mounted on swing bearings, with a central lock at the bottom. Bed length approx. 5,000 mm; side walls with 6 hinges at the bottom. Lsdpfx Amjzd D Scemoac Sidewall retraction springs Bed width 2,420 mm 5 pairs of lashing eyes in the floor, 5 to each Operating Instructions The specified gross weight is technically possible; however, depending on the cargo, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Country of Registration/Plates Country of registration: Germany With DEKRA approval and certification (pursuant to §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame Hot-dip galvanized, including passivation “15-year warranty against through-corrosion” Sidewall/deck Painted in the color of your choice

Condition: ready for operation (used), Year of construction: 2007, Laminating press manufactured in 2007. This OTT SOLID 16-32 features plate dimensions of 3200 x 1600 mm and a total pressure of 160 t, with a daylight opening of 400 mm. If you are looking to get high-quality laminating capabilities, consider the OTT SOLID 16-32 machine we have for sale. Contact us for further details. • Plates dimensions: 3200 x 1600 mm • Total pressure: 160 t Laedpozdivcefx Ammec • Daylight opening: 400 mm

Condition: used, JBT International 16 Head Rotary Filler With 2 Mettler Toledo C Series /C3/C35 checkweighers Laedpfsy Uxz Nex Ammoc Machine had complete refurbishment by original manufacturer 2020 Please note the items in this lot 30466-369 are simultaneously offered in the combination lot 30466-348 as a complete line. The separte parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2+N7 working days.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. Lsdpfxeuipu Eo Ammjac 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Ledpfx Amoyag Uajmjac Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: new, Saw shaft and saw bush Ledpenladhsfx Ammoac Tool shaft and clamping bush

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Lsdpfxjwra S Rs Ammjac Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 Ljdpoikvdqofx Ammsac year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Condition: excellent (used), mileage: 236,898 km, power: 120 kW (163.15 HP), first registration: 04/2018, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 6, total length: 5,930 mm, total width: 2,000 mm, total height: 2,610 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, navigation system, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, General information Number of doors: 5 Cab: double Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1650 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 2.442 kg Carrying capacity: 1.058 kg GVW: 3.500 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Interior Interior: black Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Heated door mirrors - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Roof rack - Side Door Right - Spare wheel = Remarks = = Additional options and accessories = - Audio operation on steering wheel - Bluetooth car kit - Climate control - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Heated door mirrors - Immobiliser - Multifunctional steering wheel - Onboard computer - Panelling - Power steering - Radio with AUX jack - Radio with DAB+ - Radio with USB port - Rear doors - Remote central locking - Roof rack - Sliding side door right Ledova N Tujpfx Ammoac - Towbar

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,096 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,510 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,100 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire size: 18x7-8 Rear tire type: Non-marking Rear tire size: 140/55-9 Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Still Lasdpjzc Ai Sjfx Ammoc Battery type: PzS Battery year of manufacture: 2018 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing with favorable terms are available upon request. We will gladly provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, rear work light, front work light, full free lift, CE certificate, non-marking tires, interior mirror, joystick, single pedal, LED, 3-wheel, seat.

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Schraml Modula 16 Super 6, manufactured in 1999. Vertical flat glass washing and drying machine, washing height 1600 mm, 6 brushes, open top. Glass thickness 3-12 mm, working height 550 mm, working direction from right to left, inlet section 2800 mm, outlet section 2800 mm, light panels at the inlet and outlet, automatic start-stop system, recirculation system with water tank and water pumps. The machine is in good condition and is available immediately. Laodpjzcxa Tsfx Ammsc

Condition: excellent (used), Year of construction: 2013, operating hours: 698 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,300 mm, color: other, GVW: 490 kg Lifting capacity: 1.600 kg Laodpfx Aezcg Sqommoc FUNCTIONS LIKE NEW! NEW BATTERY 24V 2PzB 150Ah, Internal 220V charger, Fork size 1150 x 560 mm, Single fork wheels,

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,600 mm, turning diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-16/20R with Fanuc 31i-B Table Diameter: Ø1,600 mm Max. Swing Diameter: Ø2,000 mm Max. Turning Height: 1,600 mm Table Speed: Max. 250 rpm Table Load Capacity: 8,000 kg Table Indexing Speed: 720°/min Table Indexing Accuracy: 0.001° X-Axis (Ram horizontal): -100 mm to 1,170 mm Z-Axis (Ram vertical): 900 mm Drive Spindle Speed: Max. 2,000 rpm Ram Size: 240 mm x 240 mm Milling Spindle Taper: ISO 50 Tool Shank Size: 40 mm x 40 mm Crossrail (vertical travel): 250 mm x 3 stages (hydraulic) Table Drive Motor: AC 37/45 kW (continuous/30 min. duty) Milling Spindle Drive Power ISO 50: 15/18.5 kW (continuous/30 min. duty) Control System: Fanuc 31i-B Display Unit: 15-inch TFT-LCD Memory Capacity: 1 MB Automatic Tool Changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools) Standard Tool Holders: New 240 TCR-01 (2 pcs) Splash Guard: Table version (R-Type standard design) External Coolant System: 3 bar (80 l/min) Chip Conveyor: Hinged belt type Table Bearing Cooling Device 4-Jaw Independent Manual Chuck Foundation Anchor Bolts / Base Plates Maintenance Tools and Toolbox Hydraulic Power Unit Work Area Lighting Signal Lamp: 3 colors (green, red, yellow) Operating Manuals (English): 1 CD with Fanuc manuals and 3 books with mechanical/electrical manuals Power Supply: 220 V, 60 Hz, 3-phase Machine Color: Manufacturer standard Lsdpfx Aexp Nb Tommeac OPTIONAL ACCESSORIES (#1) Turning Tool Holder: Type 240TCR, 4x included Rigid Tapping: 1x included OPTIONAL ACCESSORIES (#2) Automatic power-off for N.C. - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3-phase - on request Linear scales X-, Z-axis (Fagor, Spain) - on request Workpiece measuring device - on request Tool measurement TS27R, Renishaw - on request Other information: INSTALLATION, COMMISSIONING, TEST OPERATION, AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Image shows machine with pallet changer. The offered machine DOES NOT INCLUDE A PALLET CHANGER! Errors in technical data excepted. The scope of accessories is as described in the text of this article only. There is no entitlement to any other accessories, such as those shown for illustration purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: excellent (used), functionality: fully functional, mileage: 22,500 km, power: 161.81 kW (220.00 HP), first registration: 03/2001, fuel type: diesel, empty load weight: 7,635 kg, overall weight: 13,500 kg, tire size: 255/70 R 22.5, tire condition: 95 %, axle configuration: 4x4, wheelbase: 3,600 mm, next inspection (TÜV): 03/2027, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 9, total length: 7,500 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, parking heater, trailer coupling, truck registration, MAN TLF 16 / 30 body Metz with all-wheel drive (4x4) Crew cab for 1 + 8 personnel Differential locks Approximately 22,500 km First registered 2001 3,000 l tank Pump 1,600 l/min, manufacturer Rosenbauer Light mast on front wall of body Perimeter lighting Roof storage compartment Power/lighting storage PA device mounts/backrests in cabin Rapid attack hose reel Branch guards for roof-mounted lightbar Martin horn system Front flashers Auxiliary heater Ledpjy Iutzsfx Ammjac Roof mountings for extension ladder and 3-section sliding ladder Tool pull-out wall Tri-flash rear warning system New inspections (TÜV/Roadworthiness, emissions, safety test) available upon request for extra charge Sale price on written inquiry Sold without firefighting equipment load -Sale only to public authorities and commercial buyers- (no sales to private individuals) Sold as a used vehicle without warranty

Condition: excellent (used), functionality: fully functional, mileage: 19,000 km, power: 164.75 kW (224.00 HP), first registration: 12/1998, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, truck registration, MAN TLF 16 / 25 bodywork Metz, all-wheel drive Crew cabin for 1 + 5 Differential locks around 19,000 km First registration 12 / 1998 2400L tank Light mast at front wall of body Perimeter lighting Roof box Storage for power/lighting Snow chains PA cabin S-attack hose reel Branch guard Martin siren system Front flashers New inspections (roadworthiness/emissions/safety) available upon request at extra cost Price upon written enquiry Ledewhfl Ujpfx Ammeac -Sale only to authorities and commercial customers-

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller platform semi-trailer plus Kennis roll-on/roll-off crane, Type 16,000 with hydraulic supports ---- * Manufacturer: Schwarzmüller * Type: Platform semi-trailer plus Kennis roll-on/roll-off crane, Type 16,000 with hydraulic supports * First registration: 02/2009 * Gross weight: 39,000 kg * Unladen weight according to vehicle registration document: 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, with 1st axle as a lift axle / 3rd axle forcibly steered * Suspension: Air suspension with raising and lowering function * Tires: 385/65 R 22.5, approx. 50% tread remaining * Platform dimensions: approx. 13.50m long x 2.48m wide x 1.00m high * Color: Chassis black, side panels yellow * EBS * Kennis roll-on/roll-off crane, Type R-16/7.10, manufactured in 2009, with hydraulic supports * 3 hydraulic outriggers * Max. lifting capacity at 7.10m = 2,100 kg * Lifting capacity with short arm at 3.50m = 4,500 kg Lajdpfx Asgbtdvemmoc * 5th and 6th control circuits * Elevated operator platform with joystick control * Hatz diesel engine with silencer * Container locking mechanisms for 20 ft or 40 ft containers * 5 divided aluminum side panels * Rear hinged door * Access ladder on the rear left side * Removable stanchions * Lashing rails on the left and right for securing the load * Floor: wood/steel * 2 toolboxes on the left * 1 toolbox on the right * Individual fenders * Full-load support * Reversing lights * Spare wheel holder * Pallet fork available as an extra charge German semi-trailer!! German registration documents!!

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed semi-trailer plus Kennis roll-on/roll-off crane, type 16,000 with hydraulic supports ----* Manufacturer: Schwarzmüller * Type: Flatbed semi-trailer plus Kennis roll-on/roll-off crane, type 16,000 with hydraulic supports * First registration: 02/2009 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration document: 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, with 1st axle as a lift axle / 3rd axle forced steering * Suspension: Air suspension with raising and lowering function * Tires: 385/65 R 22.5, approx. 50% tread * Internal dimensions of the flatbed: approx. 13.50m long x 2.48m wide x 1.00m high * Color: Chassis black, side panels yellow * EBS * Kennis roll-on/roll-off crane, type R-16/7.10, year of manufacture 2009, with hydraulic supports * 3 hydraulic outriggers * Max. lifting capacity at 7.10m = 2,100 kg * Lifting capacity with short arm at 3.50m = 4,500 kg * 5th and 6th control circuits * Elevated platform with joystick control * Hatz diesel engine with silent pack * Container locking devices for 20 ft or 40 ft containers * 5 split aluminum side panels * Rear tailgate Ljdogt Si Topfx Ammsac * Rear left access ladder * Removable stakes * Perforated rails on the left and right for load securing * Floor: wood/steel * 2 toolboxes on the left * 1 toolbox on the right * Individual fenders * Full load support * Reversing lights * Spare wheel holder * Pallet forks available at an extra charge

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Lodpfst Hwucox Ammsac Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, Year of construction: 1981, workpiece length 1500 mm stroke 0 mm swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t dimensions of the machine ca. m Lajdpfot Hwpmox Ammoc

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Ljdpfx Ametzdyzomjac total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: excellent (used), Column drill press, model Flott 16 Drilling capacity: up to 16 mm (in steel) Drill chuck: 1-13 mm Mount: MK2 Right-hand rotation: 2 speeds Left-hand rotation Illumination Stepless speed control from 125 to 2,000 rpm Table size: 340 x 280 mm The machine has been technically inspected and is in very good condition. Laodpezdi R Dsfx Ammoc

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings Laodpfxjzb Elyo Ammec • Cooking of heads and tongues • Cooking of poultry • Continuous soup production