Used Used Filling Monoblock Fimer 20/20/3/3 Up To 4500 Bph for sale (103,279)

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque Kdedox I T Tajpfx Afdsk 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH Truck Chassis – New Vehicle with Day Registration, 33t version, 6x4 drive, wheelbase 3.60 m, 520 HP, fitted with PTO auxiliary drive, air conditioning, parking heater, trailer coupling with 50 mm pin, manufacturer's warranty, and much more. MAN manufacturer’s warranty until 16.12.2026 MAN ATS warranty until 16.12.2027 Trade tonnage: 33 tons Permissible gross weight: 26,000 kg 28,000 kg permissible total vertical load, technical plus Mileage approx. 1,335 km (transfer mileage) Medium-high body design Short NN cab Diesel engine with 382 kW (520 HP) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear frame overhang Differential locks on rear axles Automatic transmission MAN TipMatic 12.28 OD Gear-dependent PTO, Type NTX/10c, without flange, ratio f=1.15, approx. 3:30 position High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging mode Transmission function MAN Idle Speed Driving Transmission for increased traction in driving operation MAN TipMatic Performance and Efficiency driving mode, up to 70,000 kg MAN TipMatic Offroad driving mode, up to 70,000 kg MAN TipMatic Manoeuvre program (shunting mode) MAN EasyStart hill hold assist MAN ComfortSteering system Full brake assist Kjdpfx Afox I T Tgodsdk Emergency brake assist EBA Lane Departure Warning LDW Attention warning MAN AttentionGuard ABS Offroad with additional terrain logic EBS, ASR, ESP Front axle with leaf springs, rear axles air-suspended Front axle 9,000 kg, rear axle 13,000 kg Front axle suspension capacity 9,500 kg Stabilizers and shock absorbers on front and rear axles Axle ratio i=4.00 ROCKINGER Type 500 G 6B towing jaw for trailer loads up to 24,000 kg – technical plus Permissible gross combination weight 44,000 kg – technical plus Climatronic (automatic climate control) 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind the cab roof 2 rotating beacons on the cab roof Daytime running lights LED LED rear and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl panel, 4 functions, operable from outside with door open Driver comfort seat air-suspended and heated Comfort seat covers Smartphone integration MAN SoundSystem Advanced MAN MediaSystem Advanced navigation 7 inch New vehicle with day registration and MAN manufacturer’s warranty Net price plus 19% VAT. Attractive financing offers available on request. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2571

Condition: new, incl. tiltable – enclosed loading platform with perforated tracks / driving onto without ramps / central aluminium chequer plate floor Kedpfsx Tbkdex Afdjdk Technical data: • Brand: Martz • Model: GT KIPPBAR 580/3 3.5T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • TÜV/roadworthiness: 2 years from initial registration • Internal dimensions (LxWxH): 565 x 209 x 0 cm • External dimensions (LxWxH): 785 x 215 x 103 cm • Permissible total weight: 3,500 kg • Unladen weight: 953 kg • Payload: 2,547 kg • Chassis: Flatbed (wheels located under body) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Perforated steel tracks, ideal for secure lashing, certified to VDI 2700 Sheet 8.1 • Centrally between the tracks: anti-slip and waterproof aluminium chequer plate floor • Incl. continuous drive-on loading platform in wedge shape at rear • Hydraulically tiltable platform (11° approach angle) • Ultra-low chassis for reduced loading angle • Very lightweight trailer in robust construction • Additional 6x lashing rings integrated in the side floor • Manual cable winch at front with deflection roller for 3 positions • Braked KNOTT rubber torsion axles • Reverse automatic coupling • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin plug • Reversing lights • Large, heavy-duty safety lighting, pivotable • Integrated rear fog lamp • Lane marking lights mounted at the rear • Fold-down, drive-over number plate holder • Automatic jockey wheel fitted Optional accessories (upon request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration document can be sent in advance or temporary plates for transfer (within Germany) can be provided - Export plates with customs clearance also available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers immediately available from stock! We have been specialists and authorized dealers for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - including repair workshop - Errors, misprints and prior sale excepted -

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter Kdsdpfxjiuh E Ie Afdek type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm cutting length 38 mm freshly ground and coated Material HSS Co

Condition: used, mileage: 228,000 km, power: 260 kW (353.50 HP), first registration: 04/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,460 mm, loading space height: 2,190 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, We're delighted that our offer has piqued your interest and can assure you that you'll be able to purchase a good, affordable vehicle with a proven service history from us! Special equipment: Front axle load 8.0 t, 12V/13-pin trailer socket, audio system: CD radio (Bluetooth), 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in the cab, high compressed air unit, air horn, electrical preparation in the cab 24V/100 A, driver assistance system: brake assist (Active Brake Assist), cab: steel suspension, comfort, 150 A generator, 12-speed transmission - type: G 211-12, 12.7 cm information display with video function, 3-piece fenders, 500 L aluminum fuel tank, roof air deflector (lockable), reinforced engine brake, steered trailing axle, audible reversing alarm (external warning signal), tail lift switch, reinforced end cross member, automatic circuit breaker, seats in the cab: driver's seat: comfort suspension seat, seats in the cab: Folding driver's seat backrest, exterior sun visor, side window sun blind, driver's door, 24V/12V 10A voltage converter, 12V socket in the passenger footwell, additional 24V socket in the passenger footwell, CB radio preparation, rearview camera preparation, auxiliary heating (water). Other features: EURO 6 emissions standard, 6x2 axle configuration, 2-wire trailer brake, left-hand connections, 24V/15-pin trailer socket, Antos, electric exterior mirrors. adjustable and heated, differential lock rear axle, steel compressed air tank, driver assistance system: lane departure warning, driver's cab: width 2.30 m, driver's cab: hydraulic tilting device, driver's cab: M ClassicSpace, driver's cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric windows, tinted windscreen, urea tank (AdBlue): 60 Ltr., manual lifting roof (steel), rear axle crown gear 440, body/structure: chassis, comfort locking system, fuel tank: 290 Ltr. aluminum, unregulated power steering pump, air intake from the front, 2-stage air compressor, engine 7.7 Ltr. - 260 kW R6 diesel (OM 936), engine compartment encapsulation, trailing axle with single tires, wheelbase 4900 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and Rear axle, seat cover/upholstery: fabric, cab seats: passenger seat, front splash guard, front axle stabilizer, additional stabilizer, rear axle/trailing axle, 24V cab socket, tachograph/EC control unit, aerodynamically shaped underbody paneling, front underrun protection, toll collection preparation, offset front axle, GERMAN VEHICLE REGISTRATION/CUSTOMS SERVICE We organize your registration and the export documents/EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we would be happy to provide you with a LEASING/LEATHER PURCHASE or FINANCING offer. Kdsdpfxewwpqmo Afdok SERVICE TÜV-HU / UVV LBW / LGS INSPECTION / Tachometer inspection / OBU device installation and service by our on-site brand workshop TOLLS / ROAD TOLS TOLL can be booked on-site. ARRIVAL / DISTANCES Wittlich Train Station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale subject to our terms and conditions. The information provided online is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typos or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str.

Condition: new, mileage: 40 km, power: 382 kW (519.37 HP), fuel type: diesel, empty load weight: 14,710 kg, maximum load weight: 17,290 kg, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65 R22.5, rear tire size: 315/80 R22.5, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, MAN TGS 35.520 8x4 Tipper | Automatic, EURO 6, Retarder | Meiller-Kipper D421 Trigenius with Bordmatik | Towing equipment | Electric windows, electrically heated mirrors | Air conditioning, cruise control | Radio, differential lock | Rear-view camera | Pneumatic side wall locks | Tyres: 1st-2nd axle 385/65 R22.5 | 3rd-4th axle 315/80 R22.5 | Curb weight 14,710 kg | Rental possible | Input errors, changes and prior sale reserved Kdjdpfx Afeylnlkedek

Condition: like new (used), mileage: 400,000 km, Year of construction: 2021, IVECO DAILY 35-21, year 2021, EURO 6, 3.0 engine with 210 HP, wheelbase 3450 mm, suitable for body lengths from 3.50 to 3.90 m, automatic transmission, LED headlights, reinforced leaf springs, 400,000 km mileage. Financing or leasing available on site. Benito: 3383844139, Michele: 3394588233. Ksdpfx Afeym Da Hodjdk

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Kodpsif Rluefx Afdodk Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: new, mileage: 100 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 42 m³, loading space length: 8,000 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Orten Kettliner swap body with pivoting side walls * Cargo compartment dimensions: 8,000 x 2,480 x 2,100 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer (keg) certificate * 4 rows of load securing * Lashing rings * 2,500 kg Bär tail lift * Liftable trailing steering axle * Short cab * Full air suspension * Differential lock * Spoiler * Sun visor * Reversing camera * Navigation system * Air conditioning * Adaptive cruise control * Heated seats * Automatic transmission * Euro 6 Kjdpfx Ajyg Tbtsfdedk

Condition: ready for operation (used), Year of construction: 2007, load capacity: 360 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR360 L240 Payload: 360 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 Included: Manipulator + KRC2 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Kdodpfx Aow H A Hmjfdok Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: used, container length: 20 ft, color: grey, 2 used containers, for storage, one fully complete with side door, second incomplete Kdodpexfcwysfx Afdok Price for both

Condition: used, Year of construction: 2013, Labeller CAVAGNINO&GATTI Kdodpfxsyk Ekzj Afdek • Year: 2013 • Speed: 8,000 bph • Direction: Clockwise • 4 cold glue stations (COLLAR, LABEL, BACK LABEL, and GLUE 'I' MARK) • 3 self-adhesive stations (LABEL, BACK LABEL, NECK LABEL) • Electronic cams • Optical centering • 20 heads • Safety protections Bottling Scout Powered by Elitekno Bottling Solutions

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Axle 3: left 6 mm right 6 mm Kdodpewycwrefx Afdjk We have the possibility to stack trailers!

Condition: used, mileage: 12,200 km, power: 100 kW (135.96 HP), first registration: 12/2023, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,430 mm, loading space width: 1,440 mm, loading space height: 1,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine specification, dimensions, or additional options? Please feel free to contact us. We offer financing and leasing at attractive terms—including for the Netherlands, Austria, and new business startups! Vehicle details: * Wheelbase: 3430 mm, long rear overhang * 6-speed manual gearbox * 3 seats * Gross vehicle weight: 3.0 tons Features & Comfort: * Digital Radio Audio 30 with Bluetooth and hands-free system * Reversing camera * Air conditioning "Tempmatic" * Electrically adjustable, extended, and heated exterior mirrors * Multifunction steering wheel, adjustable in height and tilt * 70 L main tank * ECO start/stop function * BlueEFFICIENCY package * Single driver’s seat * Double passenger bench * Seat coverings: Caluma Black fabric * Lockable glove compartment * Hill-start assist * Trip computer * Central locking with remote control * Electric front windows * Fuel filter with water separator Safety: * Summer tyres * Attention Assist * Light assist * Mercedes-Benz emergency call system * Rain sensor * Halogen headlights * Adaptive brake lights * Seat belt warning system Refrigerated Body: * Reinforced floor with sand grain finish * Twin rear doors with 180° opening angle * Sliding door on the right * LED interior lighting * Aluminium step Refrigeration Unit: * Webasto Diavia Frigo 3000 * Temperature down to -20°C * Drive and stationary cooling Kjdpfx Aox U Nfxsfdedk * Underslung installation * Temperature recording (thermograph) Additional extras for the body are available at extra cost. Notice: Kindly call briefly prior to your visit—we will make sure your vehicle of choice is ready for viewing. If it is not presently in Wachtendonk, we will deliver directly from our stock. Custom bodywork is available on request. Your vehicle partner since 1996. Contact us by phone or email—we look forward to your inquiry! No liability for printing or typographical errors. Subject to prior sale and changes. Best regards, Pimenta Automobile

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Ksdjd Ehikepfx Afdjdk

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Kdodpfx Aefy Sb Eofdek

Condition: new, pressure: 320bending length: 4050column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 4740x1725x3100weight approx.: 17.9004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S640 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S640 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. Kedpofrqhpofx Afdedk CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                         ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)         ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)       ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)       ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 135bending length: 3020column width: 2555daylight: 550stroke lenght (max.): 320column throat depth: 450messurements (LxWxH): 3745x2250x2835weight approx.: 93004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 15 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                                  ¤ 4,520.00 inkl. Ksdpfx Afed Ehinsdedk ESA 675 W 3D 21'' touch screen control (Windows Base)                  ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)                ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)                ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. Kodpfjfrvw Isx Afdodk The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel.

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Kodpfx Asd En Rxefdodk Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Steuerung Delem DA 66 T ( 2D Grafiksteuerung)CNC crowning system by control: Ja über die CNC Steuerung Delem DA 66 T ( 2D Grafiksteuerung)motor power: 30Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high quality Delem DA 66 T (2 D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control DELEM DA 66 T (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Ksdpfxjh Rwyde Afdjdk Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Control DELEM DA 66 T (2 D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control Heavy-duty version Height adjustment with hand wheel on linear guide 3 stop fingers Installation height                               650 mm Projection                                           450 mm Stroke                                                 400mm Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                             ¤  4.520,00 ESA 675 W 3D 21'' touch screen control (Windows Base)             ¤   6.485,00 DELEM 66 T 2D 17 touchscreen control (Windows Base)            ¤ 10.165,00 incl. DELEM 69 T 3D 17'' touch screen control (Windows Base)           ¤ 16.350,00

Condition: new, pressure: 220bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3745x2290x3055weight approx.: 11.2504 axes (Y1, Y2, X, R): Ja alle Achsen über die Delem DA 66 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Delem DA 66 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality Esa S640. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Esa S640 standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Kjdpfx Aod Edhlofdsdk

Year of construction: 2011, condition: used, Serial number: T8019832-106 Kdodpfx Aexxn Nbofdok Transport dimensions (LxWxH): 6,06x2,44x2,59 Production country: UK Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: good (used), Power converter, power supply, power pack, switching power supply, power supply -Manufacturer: Siemens, power supply Sitop Power 20 -Type: 6EP1436-3BA00 -Number: 4x available -Price per piece -Dimensions: 160/125/H125 mm Kedpfjcc Enmsx Afdjdk -Weight: 2.1kg/pcs

Condition: excellent (used), Year of construction: 2011, functionality: unexamined, overall weight: 2,500 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 350 mm, 2 x white sandwich panel 350 x 2000 x 4500 mm with hydraulically extendable wheels, design type 5 Kodpfxjwxwcmo Afdsdk