Used Walter Brucks I for sale (54,468)

Condition: used, functionality: fully functional, machine/vehicle number: F21172J03881, Year of construction: 2018, operating hours: 3,067 h, load capacity: 1,200 kg, lifting height: 2,110 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Fahrgestellnummer: F21172J03881 Mast type: Standard Iodpfxeuhw Ecj Ag Astn Condition: Ready for use and fully functional Technical condition: Very good Battery Volt: 24V Description: Linde L12 I R0080 Year of construction: 2018 Operating hours: 3067 The device is visually and technically in very good condition. Charger on request. In our stock there are two more devices with this model type and standard mast. The fork length is 1150mm for all of them, while the overall height is 1500mm or 1690mm and the lifting height is 2110mm or 2424mm. The operating hours range from 1338h to 3166h. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the machine! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. Any sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Initial lift,

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Iodpfod I T Exex Ag Astn For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, functionality: fully functional, mileage: 276,300 km, first registration: 06/2023, fuel type: diesel, empty load weight: 8,041 kg, overall weight: 18,000 kg, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, brakes: VEB, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, parking heater, second fuel tank, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 Leaf spring suspension at the front - air suspension at the rear Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,041 kg - Permissible total train weight 44,000 kg Overall truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tanks Spoiler Full fairing Sun visor Round lights Bluetooth Fog lights Ijdpfx Agjznk D Hj Aetn Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice / errors and omissions excepted.

Condition: used, mileage: 330,000 km, first registration: 06/2023, fuel type: diesel, fuel: diesel, brakes: VEB, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, central locking, retarder, Road tractor, automatic transmission, Veb retarder, 330,000 km, side skirts, spoiler, air conditioning. Itjdpfszrpgbjx Ag Asn Price listed above plus 22% VAT + transfer of ownership fee.

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Ijdpfx Aozmtkasg Aotn Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor Iedpjvvrz Hsfx Ag Aetn -Manufacturer: TK, double hydraulic pump -Type: 22TK6/6S / 22 I 0004 -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 3x pumps available -Price: per piece -Dimensions: 215/88/H110 mm -Weight: 5.8 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,464 h, load capacity: 1,200 kg, lifting height: 3,800 mm, fuel type: electric, mast type: simplex, construction height: 2,500 mm, drive type: Elektro, High lift truck Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Itodeviz Ayspfx Ag Aon Initial lift,

Condition: used, 1FG1511-5RE34-2CH2-Z, Siemens, geared motor, i=216.65 Model: 1FG1511-5RE34-2CH2-Z K109 Itedpfx Agsvrf Ifo Aon Condition: Used

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Itjdpfxjv Al Nqj Ag Aon Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: used, mileage: 243,582 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, Volvo FH 500 Globetrotter XL Retarder I-Save * German vehicle * EURO 6 E * Retarder * Leaf / air suspension * XL cab * I Park Cool (stationary air conditioning) * Auxiliary heating * 2 beds * Refrigerator Isdpfx Ajx Tb Dwog Astn * ACC adaptive cruise control * Turn assist system * Emergency brake assist * Roof hatch * Dual fuel tank system * Navigation system * Roof and side flaps * Multifunction steering wheel * LED headlights * Automatic transmission * Differential lock * Central locking with remote control Subject to prior sale and errors excepted! Sale exclusively according to our General Terms and Conditions (GTC) Important Notice: Despite carefully checking all details in our offer, errors may still occur. Some of these result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal Information: This sales listing does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. All information provided here is without guarantee and does not constitute warranted characteristics.

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Itedpfjycv Dvsx Ag Aen Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Isdpezwk D Sofx Ag Aetn Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, functionality: unexamined, Extensive collection of a modular Emerson PACSystems RSTi-EP industrial controller. Standalone CPU with decentralized peripherals via ProfiNet. Offered as a complete package: controller, 2 network adapters, numerous digital and analog I/O modules. Suitable for building a complete control node or for expanding or providing spare parts for existing systems. Components: - 1x EPSCPE100 controller (CPU); 2x STXPNS001 ProfiNet slave adapter - 14x ST-1218 (digital input 8x24 V DC); 6x ST-2328 (digital output 8x24 V DC) - 10x ST-3218 (analog input 8x 4-20 mA); 7x ST-4214 (analog output 4x 4-20 mA) - Total of 40 modules: 112 DI, 48 DO, 80 AI, 28 AO - From an industrial environment, sold as is, no warranty/guarantee of functionality; only sold as a complete set, not individually. Itedpozmaq Hsfx Ag Aon More equipment and devices are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer through the Köck auction house. Located in Eastern Austria, exact address available upon request. Pick-up by the buyer.

Condition: used, mileage: 706,000 km, power: 368 kW (500.34 HP), first registration: 06/2020, fuel type: diesel, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, FH500 I-Save Automatic transmission RETARDER Iedpezmbqnsfx Ag Astn Air conditioning I-Park Cool Refrigeration unit ACC (Adaptive Cruise Control) with distance keeping Lane Assist Tilting hydraulic system 2 diesel tanks Good condition French registration

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Itsdpfozuyhnox Ag Ajn Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Isdpfxszvw Uho Ag Astn Weight:

Condition: used, mileage: 744,878 km, power: 353 kW (479.95 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2024, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Radio * Air conditioning * Two-way radio * Stationary air conditioning * Sleeper bunk * Cool box * Multifunction steering wheel ----* Adaptive cruise control ACC * Hill start assist * Lane departure warning * Adjustable fifth wheel plate ----Internal vehicle number: 8316---- Subject to errors & prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Ijdpfx Agjvhug Nj Aotn Whatsapp Whatsapp

Condition: good (used), Year of construction: 2000, For Sale. König Industrie Rex Automatic bread roll line included: Lifting tipper - type: Herkules HK600/3000 Heading machine – model: Industrie Rex I – type: T 6/5/4 S-1/1-70 9 – year of construction: 2000 – with TRÖ pre-portioner with oil system – 6 rows (row reduction possible to 5 or 4 rows) long former scarifying unit stamp unit pre-proofing cabinet Itodpfewtfkzox Ag Aon – model: KGV – type: RR610 SOHN-L-(B) 1035 – year of construction: 2000 Siemens S7 control. viewing is possible here on location! Transport in consultation. price: €60,000 EXW immediately available. If you have any questions or comments, please let us know. Kind regards, Leo Holland

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion (Hovik) Type: P 90 Included in delivery: 01x Pallet rack beam, used Material color: white I-profile: 100 x 50 mm Bracket: 5 hooks Clear width: 950 mm 02x Locking pin, used Version: Sendzimir galvanized For securing the beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Isdpfx Ajw R Shasg Astn This item is available for collection only. Any delivery or shipping of this item is subject to additional costs, which can be requested from us depending on the place of delivery and delivery scope.

Condition: used, mileage: 234,809 km, power: 345 kW (469.07 HP), first registration: 03/2025, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, VOLVO FH 460 4x2 I-SAVE, dual-circuit hydraulic system* – first registered: 03/03/2025 * 234,809 km * Automatic transmission * EURO 6 * 12,777 cc * 345 kW (469 hp) * Tires: * 1st axle: 385/55 R 22.5 * 2nd axle: 315/70 R 22.5 * Sleeper cab * Rear cabin suspension: air suspension Itedpfx Aezig Evjg Aon * Tipping hydraulic system * Standard passenger seat * Driver's seat: Komfort, air-suspended * Seat upholstery: leather * Automatic climate control * Parabolic suspension (front) * Air suspension (rear) * Refrigerator box * German truck * Compact retarder * Engine is running! * Accident damage as shown in the pictures * All information without guarantee

Condition: ready for operation (used), Siemens 6SC6190-0FB60 Simodrive power unit SN 40249-I 103B used 100% functional Iedpfx Agjxag Dyo Aotn

Condition: ready for operation (used), Siemens 6SC6190-0FB60 Simodrive power unit SN 40253-I 103B used 100% functional Itsdpjxag Eksfx Ag Asn

Condition: new, functionality: fully functional, machine/vehicle number: YV2RT40A6SA373948, mileage: 683 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, empty load weight: 8,336 kg, maximum load weight: 9,664 kg, overall weight: 18,000 kg, tire size: 385/55 + 315/70 R 22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,700 mm, next inspection (TÜV): 10/2026, fuel: diesel, fuel tank capacity: 975 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, second fuel tank, soot filter, spoiler, tire pressure monitoring, traction control, our vehicle number: #30738 Volvo FH 500 Standard Tractor Unit Cab: AERO Globetrotter XL, rear air suspension Euro 6 DPF diesel particulate filter Additional brake: Retarder Wheelbase 3,700 mm Full air suspension Tyres: 385/55 + 315/70 R 22.5 Alloy wheels 2x diesel tanks: 610 + 365 liters Automatic transmission: I-Shift Automatic climate control Auxiliary heater Stationary air conditioning I-Park Cool ABS Iedpox A Ew Dsfx Ag Ajtn EBS ASR Differential lock Cruise control ESP ACC adaptive cruise control AEBS advanced emergency braking system Lane keeping assist Driver fatigue alert Side collision avoidance assistant Turning assistant I-Torque incl. I-Roll & brake cruise control I-See 2 beds Electrically adjustable, leather, air-sprung driver's seat/heated/ventilated Refrigerator Info & Media package High DAB+ Camera monitor system (CMS) Reverse and right-side close-range camera Full side skirts LED cornering lights LED daytime running lights LED headlights with adaptive high beam Headlamp cleaning system LED fog/work lamps Light/rain sensor Air horn Electric windows, 2-way VAS Tire pressure monitoring system Electric sun blind Sun blind left/right Leather multi-function steering wheel On-board computer Electric sunroof Central locking with remote control Traffic sign recognition Reversing warning system TV pre-installation Hill start assist Leasing or hire purchase/financing available on request!

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7560, working width: 1,200 mm, Equipment: documentation/manual, TECHNICAL DETAILS Working width: 1,200 mm MACHINE DETAILS Connected load: approx. 51 kW Iodpjy Ed A Tjfx Ag Aetn EQUIPMENT Documentation

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) Itsdpfsyxl Siex Ag Aen In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)