Used Walter Brucks I for sale (54,500)

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg Iiodpfx Agszta U Se Ash -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84 kW Multi-blade saw Isdpfx Agez H T Ayj Asih Dimensions Length: 3440 mm Width: 1900 mm Height: 1700 mm Cutting parameters Maximum diameter of logs to be sawn: 450 mm Diameter of circular saw: 630 mm Minimum width of the center stack: 60 mm Maximum number of saws per spindle: 4 2 spindles, one on top, one on the bottom Motors Power of the motor for the lower drive: 52 kW Power of the motor for the upper drive: 41 kW Spindle speed: 1480 rpm Infinitely variable feed speed: 0–15 m/min (0–25*) Power of the motor for the feed drive: 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length The multi-blade saw is immediately available and ready for use. Loading onto the truck will, of course, be handled by us.

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) Iedszqunzopfx Ag Aoih - The processing trough needs to be replaced.

Condition: excellent (used), Year of construction: 2018, Walter Trowal CF 200 Iisdpoz N Ti Hsfx Ag Aeh Volume: 200 liters Largest component: 180 mm

Condition: excellent (used), Year of construction: 2022, Walter Trowal, rotating bell Volume: 110 liters Ijdez N Tnvepfx Ag Aeih

Condition: used, centre height / mm O. 600 mm Ijdpfezcq Eusx Ag Aoih Weight: 340 kg

Condition: repair required (used), functionality: not functional, Walter HMC 500 WWM 5-axis tool grinding machine, damaged. A-axis: 750mm X-axis: 290mm Y-axis: 320mm Z-axis: 660mm Tool diameter: 200mm Iodpfxez E Rcbe Ag Aoih Error code shown in the picture.

Condition: used, centre height / mm weight 110 kg Iiodpfxjy Suqzs Ag Ajh diameter 400 mm

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Iisdjxz Divopfx Ag Aeh

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE Ijdpfx Agemv Elpe Aoih TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm Iiodpfx Agsmv Ekyj Aoh dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Catalog number: 8122 TECHNICAL DATA Iisdpfez N Hhiex Ag Ash - Cutting width: 300mm - Max. material width: 350mm - Max. cutting height: 140mm - Max. blade diameter: 400mm - Spindle diameter: 70mm - Main motor power: approx. 18.5kW - Feed motor: 1.1kW - From above: - 2 rows of pawls/ejectors - 2 toothed draw rollers - From below: - Guide strip - Slip roller - 2 toothed draw rollers - Blade shaft - Slip roller - 2 toothed draw rollers (outfeed) - 3 feed speed settings + stepless speed control via inverter + forward/reverse - Diameter of dust extraction nozzle: 200mm - Overall dimensions (L/W/H): 2830x1200x1720mm - Weight: 998kg ADVANTAGES - Made in Poland - Multi-blade arbor saw - DTR documentation available - Used multi-blade saw, very good condition Net price: 24,900 PLN Net price: 5,790 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: Ijdox Dkyyspfx Ag Aoih - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine Iiedoz E N Upopfx Ag Ajh A-axis: 750 mm X-axis: 290 mm Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes.

Condition: good (used), We offer you steel tanks for storing almost all common liquid media. We have all available sizes, from 1,000 liters to 100,000 liters, constantly in stock. Iijdegx E Uhspfx Ag Aoh No matter how you want your tank to be equipped, we will implement your wishes and comply with official regulations at fair prices. Whether it's an inner lining, 2-component epoxy coating, exterior paint, installation or modification of fittings, DEKRA inspection, loading, and transport – we are the right partner for you.

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Isdpsy Sw T Ssfx Ag Aoih

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, overall weight: 4,710 kg, A wide range of accessories is included. Isdjz I Rigopfx Ag Aeih

Condition: excellent (used), 16 shank mills with indexable inserts Manufacturer: Walter Isdpfx Agjdx D Tvj Aoih Weight: 9.5 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Iiedpfez Ei Amex Ag Ajh Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: used, Tool holder, milling holder, milling tool, adapter, clamping unit Iedpfx Ajgkw I Isg Aeih -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Isdpfx Agsz Atv Ij Asih • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Ijdpfszyrpnex Ag Asih Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table Iodpfxezzp Epo Ag Aoih If you have any questions or would like more information, please feel free to send us a message.

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Ijdpfx Ajzzmtkog Aeih Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, amount 7 Packung Various indexable inserts from Walter, Iodpfx Agex Sr Ahs Aeih see photos, for sale as a complete package. *2 packs still in original packaging -> NEW