Used Water Tester for sale (6,720)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Cjdpfx Asua Tbwed Nerb Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Csdpeyc H Irsfx Ad Norb Applications: • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries

Condition: used, This listing is for the Elga Veoli LA757 Labwater Purification The unit is in full working condition and ready for immediate use Designed to deliver high-quality purified water for laboratory applications, this system is compact, efficient, and suitable for analytical and research environments requiring consistent water purity. Transparency Report and Technical Audit: Codsyyn D Djpfx Ad Njrb • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2010, functionality: fully functional, Light fastness tester with water-cooled xenon arc lamp Credpfx Adoy Dht Hj Njb + 600 h of operating time left on the installed xenon arc lamp + 1 new xenon arc lamp included (value: €2,500)

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Cjdpfx Aswqlmdod Norb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale the CNC WATER JET INTERMAC Cjdsyzkh Uopfx Ad Nerb Type: PRIMUS 184 MARMO Year: 2017 Very good working condition ! Working area: 2000 × 4000 mm , max. thickness 250 mm. Pressure booster BFT ECOTRON 40. 37 ,the sand filter and the safety light barriers included.The water jet cutting machine is ideal solution for kitchen countertops, as well as for cutting a wide variety of materials, natural and sintered stone, and ceramic materials.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Crsdpfewnidhex Ad Njb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Condition: Used Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type-CBL 80-200/211 Manufacturer code: 2 Packaging condition: no packaging Codpey Amr Sefx Ad Njrb

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Sturdy machine stand designed for rugged everyday use. Cedpfxjwg R Ths Ad Nerb Measuring systems: - Measuring head with ground glass - Rockwell with dial Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Machine weight approx. 260 kg

Condition: used, Year of construction: 2006, PET bottling line, 25,000 bph, for sale with the following line components: - PET blow moulder, manufacturer: Krones, type: Contiform, year: 2006 - Rinser-filler-capper block, manufacturer: Krones 60/80/15, year: 2001 - Labelling machine, manufacturer: Krones, type: Contiroll, year: 2001 Csdeyzft Sjpfx Ad Njrb - Shrink tunnel/shrink packer, manufacturer: Krones - Traypacker, manufacturer: Dimac - Palletizer, manufacturer: Kettner, type: Pressant The line has been dismantled and is in storage.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) Crodpsyz Dhzsfx Ad Neb 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, This listing is for the Palltronic Flowstar IV Crjdpsyfhdmjfx Ad Nob The unit is in full working condition and is ready for immediate use Palltronic Flowstar IV Filter Integrity Testing Instrument (and variants like Pall FFS04 S Palltronic Flowstar IV Filter Integrity Test Instrument / Pall Flowstar IV FFS04 Filter Integrity Tester) are precision filter integrity test instruments designed to check whether sterilising-grade membrane filters and associated assemblies have defects (like leaks or incomplete retention) before they are used in critical processes — particularly in pharmaceutical manufacturing and biotech Typical Uses These instruments are most commonly used in environments where sterility is critical: Final filtration before sterile drug product filling. Leak testing of single-use assemblies and filter housings. Quality control in vaccine production, biologics manufacturing, and related biotech workflows.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 30,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 30,000 liters / 30 m³ Length: approx. 9,940 mm Diameter: approx. 2,000 mm Weight approx. 5,000 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. Crodpfx Adjvmz Hao Nob The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 20,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 20,000 liters / 20 m³ Length: approx. 6,840 mm Diameter: approx. 2,000 mm Weight approx. 3,500 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick nozzle. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. Csdsvmz D Ejpfx Ad Nsrb The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. Of course, we always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double-walled, suitable for walkable and driveable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used, immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire department coupling / fixed coupling A according to DIN 14319 in design form B without dipstick - Vent flange nozzle in NWN 100 with cap with a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Coated with a bitumen coating on the outside for protection - On request, we can provide the tank with a full internal coating on a bitumen basis or an epoxy resin internal coating (against corrosion) - It is also possible to line the tank with a plastic inner shell Crodpfx Ajhh Sprsd Njb A cost-effective delivery with your own truck is possible. Simply let us know the delivery location and you will then receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers of all kinds is possible, just contact us. We always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Crodpovmz Idofx Ad Neb Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, loading space volume: 20 m³, Year of construction: 2023, Equipment: air conditioning, = Additional options and equipment = - Leaf spring suspension = Notes = Model year: 2023 = Company information = Van Vliet Automotive Trading – Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our in-house (construction) workshops, modification center, and paint shop ensure a fast and project-specific handling of your order, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers, available globally on-site to provide technical support and training. Contact our experienced, multilingual customer advisors now for professional, project-specific, and competitive consultation. = Further information = Transmission: TipMatic 12.28OD, automatic Year of manufacture: 2023 Model year: 2023 Usable material: Food products Tire size: 315/80R22.5 Suspension: Leaf spring suspension Number of cylinders: 6 Engine displacement: 10,518 cc Credpfx Asvpqipsd Nob Gross vehicle weight: 33,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, such as parts supply and local training.

Year of construction: 2005, condition: ready for operation (used), Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible. Crodpsyypmgsfx Ad Nob

Condition: good (used), double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available Csdpfx Ajdzxklsd Norb -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Year of construction: 2025, condition: excellent (used), Top-maintained and hardly used Wöhler DP 700 tightness testing device Year of manufacture: 04/2025 Measurements: 145 Total hours: 7:09 Including the accessories shown in the pictures and - 5-pack of filter pads (new & packaged) - Air measurement hose 4m Adapter 0.3 DP700 (new & packaged) Crsdjyxtbfjpfx Ad Njb

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Crsdpfx Ajcpwhbod Nob Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Crjdpfoyybt Eex Ad Njb Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Credpfx Adoyxxz Do Nsb Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Baujahr: 2019

Year of construction: 2007, condition: ready for operation (used), A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Crjdpfoxxa T Ssx Ad Nsb

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Fully functional. Display without any damage. Complete set as shown in the photos. Included: – SJ-210 measurement unit – standard drive attachment Cedpfjyc Rwdox Ad Njrb – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.