Used Weber Extrusielijn 23 for sale (5,205)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Gbjdpfx Aexf Up Ueixsr Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: like new (used), Quantity: 2 Gbsdpfx Aist H Rrzoxer 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Location: Pirmasens We will be happy to send you further information on request.

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm Godpfjid Sgmox Aixebr hight of the coil: max. 800 mm

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm coil hight: max. 800 mm Gedpsdx Ryyefx Aixjbr

Condition: used, For questions regarding the vibratory plate, Mr. Herden (Tel. ...) will be happy to assist you. Weber CR 7 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / in stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer's warranty Technical Data Engine: Hatz Diesel Maximum engine output: 7.9 (10.7) kW/HP Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Processes signals from the machine’s built-in sensors and visualizes them using graphic symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if operation would lead to potential engine damage - The user is also shown, via symbols, how to remedy any displayed issues - In the case of an overly dirty air filter, step-by-step instructions guide cleaning and replacement of the filter element - The Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Compaction progress is indicated to the user in a clear, easy-to-read bar graph - The machines now feature push-button activation for vibration once the engine has started - No need for a throttle lever, as the engine self-regulates to the correct speed automatically The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks in classical road and civil engineering as well as paving applications. Balanced running characteristics, high operating smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic shift - Throttle cable and hydraulic switch protected within the guiding bar - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and quick transport with extra-large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operator comfort with electric start - Applications: road construction, civil engineering, paving, and—thanks to the low overall height and working width—also optimal for trench shoring applications We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. Gbsdpeykhvaofx Aixsr We are happy to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden is available to assist you by phone. Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / Brand New / In Stock & Immediately Available Sales Price: €8,990.00 net / €10,698.10 gross 3-Year Manufacturer Warranty Technical Data Engine: Hatz Diesel Gjdpfx Aoykhu Nsixobr Max. engine output: 7.9 kW (10.7 HP) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the sensors installed in the machine and displays them graphically using symbols - Similar to the previous engine protection from Weber MT, the engine shuts off whenever engine damage would be expected if operation continued - The user is also shown via symbols how to resolve any indicated faults - For a heavily soiled air filter, the cleaning and replacement procedure for the filter element is explained step by step - Weber Smart Assist also includes the COMPATROL compaction control, now presented with a new design - It provides the user with an easy-to-read and clearly understood bar graph display of the compaction progress - The machine operation is also new: once started, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically adjusts to the correct speed The reversible soil compactors of the CR series stand out for their high compaction performance and top efficiency. They are the first choice for compaction work in classic road and civil engineering applications as well as paving. Balanced running properties, high smoothness, and low hand-arm vibrations ensure high operating comfort. CR 6 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic direction change are routed protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through the engine guard frame and engine cover - Reduced maintenance effort thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and fast loading thanks to the large, foldable lifting eye - Secure lashing for transport with additional lashing eyes on the engine console - Enhanced operator convenience with electric start - Areas of application: road and civil engineering, paving, and thanks to its low height and working width, the CR 6 is also ideal for trench shoring We have a very large selection of different vibratory plates in stock and immediately available! Mr. Herden is happy to assist you by phone. On request, we can also provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New Unit / In Stock & Immediately Available Sales Price: €11,190.00 net / €13,316.10 gross 3-Year Manufacturer’s Warranty Technical Data: - Engine: Hatz Diesel - Max. Engine Output: 10.5 kW (14.3 hp) - Weight: 608 kg - Centrifugal Force: 75 kN - Frequency: 67.5 Hz - Working Width: 70 cm Weber Smart Assist (WSA): - Evaluates signals from the machine’s integrated sensors and displays them graphically via symbols - Similar to the previous Weber MT engine protection system, the engine will shut down whenever continuation could cause engine damage - Symbols also indicate to the operator how to resolve any displayed issues - In the event of a heavily soiled air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also features the newly designed COMPATROL compaction control system - Provides the operator with a clear and easily readable bar graph display of compaction progress - New operating concept: After starting the engine, vibration is activated at the press of a button - There is no throttle lever as the engine automatically adjusts to the correct RPM The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running properties, high operating smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – Economical Machine with Powerful Compaction: - Infinitely variable forward and reverse travel; hydraulic reversing - Throttle cable and hydraulic reversing system routed and protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Engine and machine protection via protective frame and cover - Lower maintenance requirements thanks to self-adjusting centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick loading via large, foldable lifting eye - Secure tie-down for transport thanks to additional lashing points on the engine console - Greater operator comfort due to electric start - Areas of application: road and civil engineering, paving work, and, thanks to the low overall height and working width, the CR 8 is also ideal for trench shoring We have a large selection of various vibratory plate compactors in stock and available for immediate delivery! Mr. Herden will be happy to assist you by phone at ... Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. Gbsdpfjyi Rzvjx Aixer We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Gbsdpfxjyi Rzpj Aixer Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min Gsdpoymfzrjfx Aixobr feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Gbodpfx Ajif Rvajixer

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 2087, functionality: fully functional, overall weight: 4,000 kg, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed rate: 6 m/min Maximum feed rate: 28 m/min Number of spindles: 6 Gbedpfjzrmpasx Aixjr Spindle speed: 6,000 rpm Spindle diameter: 40 mm Spindle motors 1. Spindle, bottom: 5.5 kW 2. Spindle, right: 5.5 kW 3. Spindle, left: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, top: 7.5 kW 6. Spindle, bottom: 7.5 kW MACHINE DETAILS Main fuse: 105 A Dimensions & Weight Dimensions (L x W x H): 7,500 x 2,000 x 1,850 mm Weight: 4,000 kg

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Gsdpfxswnhice Aixobr Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Price: On request Four-axis planer Gbedpfx Aijwnit Ajxor Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Weidner buffer table Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) Available from November 2024 - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total width: 1,700 mm, total height: 1,650 mm, Colour: Grey Empty weight: 2.500 kg Dimensions (LxBxH): 400 x 170 x 165 cm - Year: 1996 - Documentation available: Yes - CE certificate present: No - Serial number: 123-2001 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 Gbedpfx Aiezuayqexor - - Max. planing block diameter [mm]: 150 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - Max. planing width [mm]: 260 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 380 - Current consumption [A]: 84 - Fuse [A]: 100 - Power [kW]: 39.0 - Transport dimensions: 4000mm x 1700mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, - Brand: Socage / Iveco - Type : 23T - Year of construction: 2019 - Hours: 1511 hours - Odometer: 11198 km. - Weight: 3315 kg. - Drive: Diesel + 220 volts - Working height: 23 meters - Lateral reach: 13.5 meters - Lifting capacity: 300 kg. - Automatic stamping - Narrow + Wide stamping - Dutch license plate possible - Export license plate possible - Safety inspection valid until Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Socage / Iveco * Lifting capacity: 300 kg. * Drive: Diesel + 220 volts *Type: 21DJ * Construction year: 2020 * Hours: 86 uur * Km. position: 3244 km. * Weight: 3300 kg. * Working height: 21 meters Godpfx Aoztzuysixsbr * Lateral reach: 10 meters

Condition: used, Year of construction: 2002, - Brand: Aichi - Type : SP 21 AJ - Year of manufacture: 2002 - Weight : 14700 - Hours: 8378 hours - Working height: 23 meters - Lateral reach: 18 meters - Lifting capacity: 227 kg. - Drive: Diesel - Isuzu - Safety inspection through Aerial work platform book + CE document available - Complete maintenance history available - 1st owner - More photos and video on our website Gedpfx Aijztrmyexobr - Trade-in and transport possible * Brand: Aichi * Working height: 23 meters *Type: SP 21 AJ * Construction year: 2002 * Lateral reach: 18 meters * Weight: 14700 * Hours: 8378 uur * Lifting capacity: 227 kg. * Drive: Diesel - Isuzu

Condition: used, mileage: 13,475 km, power: 130 kW (176.75 HP), first registration: 07/2023, fuel type: diesel, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, short cab, sprung seat, double bench seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 6-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame fairing, differential lock, leaf spring suspension, trailer hitch ball head, trailer hitch with air and light connections, underbody protection, sunroof, green environmental badge. Wheelbase: 3020 mm, Body: HIAB MULTILIFT XR5S3250 city skip loader for containers up to 4,000 mm, front axle, 4.1 t, rear axle, ring gear 325, hypoid, 6.2 t, differential lock rear axle, electronic braking system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, stabilizer, under frame, rear axle, standard cockpit, pollen filter, ClassicSpace, rain and light sensor, daytime running lights, high-performance engine brake, engine MB 60-1c, pump, Meiller pump, 5-piston, type 254/1, tipping platform, floor 4 mm, lashing recesses in the tipping platform floor, stability control assistant (ESP), lane keeping assist, Active Brake Assist, permissible total weight 21,000 kg. Gbedpfx Aezuc Iwsixer Multiple units available with mileage between 10,000 km and 33,000 km! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 48,000 km, power: 177 kW (240.65 HP), first registration: 07/1997, fuel type: diesel, empty load weight: 13,200 kg, maximum load weight: 1,800 kg, overall weight: 15,000 kg, tire size: 275/70R22.5, axle configuration: 4x2, next inspection (TÜV): 03/2027, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, cabin, differential lock, fog lights, low noise, Vehicle location: en route / in transit, registration number Haus, 1 air suspension seat, double bench seat, rear window, electric mirrors, heated mirrors, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf spring suspension, low-noise G1, 4-point hydraulic support, environmental badge (red). Gbedpfxjztz T Ns Aixjr Superstructure: Metz aerial ladder DLK 23-12 and Briggs & Stratton generator, rear axle H4 I=5.22, crown wheel 410, differential lock rear axle, ABS, reinforced rear axle shock absorbers, rear axle stabilizer, front axle stabilizer for extreme loads, reinforced parabolic springs front and rear, stage I, pneumatic engine brake. Generator: Manufacturer: Briggs & Stratton Displacement: 480 cm³ Power: 7.8 kW / 3000 rpm Year of manufacture: 1997 Operating hours: 72 hours All information is provided without guarantee as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Gbsdpfszqvhvex Aixer

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Gbodszt Hf Dspfx Aixer Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted Gedpfx Aioztv Iuexjbr – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm Gbjdpfx Aijzrfgqoxer We have the possibility to stack trailers!

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox Gbedpoztdz Aofx Aixjr - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Gbodpfx Aoxg Sa Hoixjr Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Sprinter 315 Tourer, new vehicle / pre-series vehicle Length: 5930 mm Manual or automatic transmission 2026 model with current driver assistance systems GSR3 - Wheelbase: 3665 mm - H2 high roof - Single passenger seat - Vehicles equipped with airline track system and 7 individual seats (as shown in the pictures) Rear-adjustable armrests, left and right. 430 mm seat width with armrests, 540 mm. Optional extra-wide seats - Radio with 10-inch display - School bus flashing lights - Front and passenger compartment air conditioning - Electric sliding door - Electric step - Black tinted windows Price per vehicle: 53,490.00 EUR plus 19% VAT. Automatic transmission: + 2,000.00 EUR. Optional extras available, such as a wheelchair ramp or lift. Net export possible. Gjdozti Stspfx Aixobr