Used Weeke Bhp 200 for sale (21,325)

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Nwedszhkfqjpfx Ai Ton Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 210 mm, travel distance Z-axis: 400 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This DAEWOO EcoTurn 200 features a reliable Fanuc 18 T control system, ensuring efficient operation. If you are looking to get high-quality turning capabilities, consider the DAEWOO EcoTurn 200 machine we have for sale. Contact us for further details. - Manufacturer: Daewoo- Model: EcoTurn 200- Year of Manufacture: 1999- Condition: Good / Fully functional- Control: Fanuc 18 T Technical Specification Nwsdezb Ewispfx Ai Tsn Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. Nsdpfxsxwl Tbs Ai Tewn X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approximately 200,000 kg.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L Nsdpfez Sr Uyex Ai Tjwn - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: Njdey Hkd Hopfx Ai Town 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm Nsdpfxoy Au Eys Ai Tewn -Weight: 966 kg / 70 kg

Condition: good (used), Year of construction: 1998, - Bertolini Model: 330.1 VF - Type: diaphragm / membrane pump - Flow: 34 L/min at 0 bar, about 31 L/min at maximum pressure - Maximum pressure: 40 bar / 580 psi - Speed range: 300–650 rpm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Nwedpfx Ajz Rhdzsi Tsn Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Parts shown by hand not come. Nwedpfoz Uvpmex Ai Ton

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Nodsz Uq E Ajpfx Ai Tjwn Year of manufacture 1984 Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm Njdpezr I H Tsfx Ai Tjwn - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Description The SR-200 shredding mechanism was specifically developed for the recycling and shredding of plastics. It was manufactured by REMET CNC TECHNOLOGY and is made of high-quality, certified sheet metal. The bolted construction ensures the necessary rigidity and strength. Precise machining is carried out on a modern CNC machining center, which guarantees the highest quality, accuracy, and coaxiality. This care in manufacturing contributes to the long service life of the components and the entire device. The SR-200 features a fully disassemblable, bolted structure and induction-hardened gears. The working chamber measures 200 x 200 mm and is accessible through mounting holes. The working tools are made of wear-resistant steel. A special feature of the shredder is the unique mounting system for the counter knives, which is pressed by springs. This system enables thorough cleaning of the space between the cutting knives and ensures efficient and reliable shredding. Technical data Recommended motor power 3 kW Knife diameter 103 mm Knife thickness 8 mm Knife tooth height 11 mm Number of shredding knives 2 pcs. Number of knives on the shaft 11 pcs. Dimensions of the working chamber 200 x 200 mm Gear diameter 85 mm Njde Abpx Tspfx Ai Tjwn Weight 50 kg ATTENTION! DELIVERY IS UNPAINTED! PAINTING IS AVAILABLE AT AN ADDITIONAL COST!

Condition: new, Swivel castor with fixed mounting, diameter 200 mm, load capacity 300 kg, with plate, solid polyurethane tire · Steel sheet housing · Zinc-plated and chromated · Double-row ball bearing in the fork head · Tread made of cast polyurethane, hardness 95 +/- 3 Shore, wheel body made of aluminum · Minimal rolling resistance · Quiet operation, high abrasion and tear resistance, resistant to greases, oils, etc. · Operating temperature -20 °C / +80 °C · Wheel axle screwed · Total lock, mounted at the front · Ball bearing · With plate mounting · Further technical properties, surface of housing: zinc-plated and chromated · Screw hole diameter: 11 mm · Screw hole spacing: 105 x 75/80 mm · Supplement: Standard · Plate width: 109 mm Nwjdpfx Ais Abudbs Ten · Material, housing: Steel sheet · Plate length: 138 mm · Profile: Standard Overall height: 235 mm Screw hole spacing: 105 x 75/80 mm Design: with total lock Surface of housing: zinc-plated and chromated Overhang: 58 mm Material, housing: Steel sheet Profile: Standard Plate width: 109 mm Wheel diameter: 200 mm Supplement: Standard Mounting type: with mounting plate Plate length: 138 mm Screw hole diameter: 11 mm Wheel width: 50 mm Load capacity: 300 kg Material, castor: Cast polyurethane tire

Condition: new, Construction film, 200 µm, length 50,000 mm, width 4,000 mm, polyethylene, transparent. · Transparent · Rolls of 4 x 50 m · Dimensional tolerance ± 5% · Sales unit = 1 roll = 200 m² / Price per roll Nedpfx Aij Abpy Ds Tswn Thickness: 200 µm

Condition: new, AC = AC welding for simple welding tasks Does not comply with EU noise emission directive 2000/14/EC Stepless welding adjustment Low oil level shutdown Generator overload protection Carrying handles Synchronous generator type Max. output 1~ [kVA/kW] 6.5/5.9 Continuous output 1~ [kVA/kW] 5.9/5.3 Rated voltage [V] 230 Rated current [A] 25.7 Power factor [cos φ] 0.9 Frequency/protection class [IP] Welding power adjustment range [A] 60 - 200 Open-circuit voltage [V] 45.0 ÷ 60.0 Min./Max. welding voltage [V] 22.4 / 28.0 Welding operation at 60% duty cycle [A] 180 Welding adjustment, mechanical Engine type Design: 1-cylinder, 4-stroke OHV Displacement [cm³] 389 Power at 3000 rpm [kWm] 6.4 Fuel: Gasoline Neds Abn Dnepfx Ai Town Fuel consumption at 75% load [l/h] 2.1 Runtime at 75% load* [h] 3.1 Starting system: Recoil starter Sound power level LWA [db(A)] 99 Weight approx. [kg] 95 Dimensions L x W x H [mm] 890 x 490 x 570 Protective contact sockets: 2 x 230 V / 16 A

Condition: new, Energy-saving thanks to the use of IE2 motors Nsdpfx Ae Abn Igoi Town Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of tank sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile units in the tank size range of 50 - 200 l: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the tank size range of 50 - 500 l: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Intake capacity l/min 560 Delivery rate l/min (at 7 bar) 400 Motor power kW 3 Rated voltage V/Hz 400/50 Compressor speed min 1,215 Max. pressure bar (g) 10 Tank capacity l 200 Stages 2 Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Intake capacity l/min: 560 Delivery rate l/min (at 7 bar): 400 Max. pressure bar (g): 10 Tank capacity l: 200 Weight kg: 148 Rated voltage V/Hz: 400/50 Compressor speed min: 1,215 Stages: 2 Dimensions l/w/h in mm: 1,400/550/1,050 Motor power kW: 3.0

Condition: new, Features - Mobile piston compressor with oil-lubricated design Nodpfo Abqlzjx Ai Tjwn - Slow-running, V-belt-driven 2-cylinder, single-stage inline unit - New intake filter system for minimal intake noise - Start-up relief via pressure switch control - Equipped with large, profiled, ball-bearing hard rubber wheels - Swivel casters for easy handling - Condensate drain via ball valve - Supplied including phase converter plug Voltage/Frequency: 230/50 Dimensions (mm): 1440x480x1130 Speed RPM: 1100 Tank pressure bar: 10 Delivery rate l/min: 260 Sound pressure level LWA/dB: 92/73 Intake capacity l/min: 405 Motor kW/HP: 2.2/3 Tank size (L): 200

Condition: new, for ESE 145, 150 (AS) Nedpfj Abturex Ai Tewn

Condition: new, Pneumatic wheel, D. 260 mm, load capacity 200 kg, swivel caster with plate, ribbed profile * Swivel caster * Housing made of steel sheet, zinc-chromated, with pneumatic tire on steel rim, rubber (black) * Double-row ball bearing in the fork head Nedpfj Abq Upsx Ai Town * Roller bearing + ribbed profile * With plate mounting * Air pressure 2.5 bar: 3000 275 800 * Air pressure 2.0 bar: 3000 275 802 * Further technical specifications: Screw hole diameter: 15 mm * Color of caster: black * Screw hole spacing: 140 x 140 mm * Air pressure: 275800 = 2.5 bar, 275802 = 2.0 bar * Material of housing: Steel sheet Load capacity: 130 kg Color of caster: black Screw hole diameter: 15 mm Material of caster: Pneumatic tire Overall height: 295 mm Air pressure: 275800 = 2.5 bar, 275802 = 2.0 bar Mounting type: with mounting plate Screw hole spacing: 140 x 140 mm Wheel diameter: 260 mm Material of housing: Steel sheet Wheel width: 85 mm Design: Swivel caster Plate length: 175 mm Profile type: Ribbed profile Plate width: 175 mm Overhang: 70 mm

Condition: new, Swivel castor with fixed axle, D 200mm, load capacity 600kg, with plate, solid polyurethane tire · Steel sheet housing · Zinc-plated and chromated · Double-row ball bearing in the swivel head · Tread made of cast polyurethane, hardness 95 +/- 3 Shore, wheel body made of aluminum Nsdpfxs Abudhs Ai Tewn · Minimal rolling resistance · Low-noise operation, high abrasion and tear resistance, resistant to greases, oils, etc. · Operating temperature -20 °C / +80 °C · Wheel axle screwed · Total lock, mounted on the leading edge · Ball bearing · With plate mounting · Further technical features: surface of housing: zinc-plated and chromated · Screw hole diameter: 11mm · Screw hole distance: 105 x 75mm · Additional information: Standard · Plate width: 110mm · Material of housing: Steel sheet · Plate length: 138mm · Profile: Standard Screw hole diameter: 11 mm Plate width: 110 mm Wheel diameter: 200 mm Mounting type: with mounting plate Design: with total lock Load capacity: 600 kg Wheel width: 50 mm Material of housing: Steel sheet Screw hole distance: 105 x 75 mm Additional information: Standard Overall height: 255 mm Surface of housing: zinc-plated and chromated Plate length: 138 mm Material of wheel: Cast polyurethane tire Offset: 52 mm Profile: Standard

Condition: new, Energy-saving due to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of pressure tank sizes, up to 200 liters, they are available in mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 l • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 l • Check valve • Condor pressure switch Nodpfx Aj Abn S Eoi Tswn • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 460 Delivery rate l/min (at 7 bar) 340 Motor power kW 3.0 Rated voltage V/Hz 400/50 Compressor speed min 990 max. pressure bar (g) 15 Tank capacity l 200 Stages 2 Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Motor power kW: 3.0 Stages: 2 Weight kg: 148 Tank capacity l: 200 max. pressure bar (g): 15 Dimensions l/w/h in mm: 1,400/550/1,050 Rated voltage V/Hz: 400/50 Delivery rate l/min (at 7 bar): 340 Compressor speed min: 990 Suction capacity l/min: 460

Condition: new, Description The wide F2-200 mowing units have a lateral displacement of 40 cm (-10 cm to +30 cm from the mowing unit axis) and are equipped with a suspension system that is compatible with tractors in Category II. The robust housing ensures high stability and durability. The mowing units have a single-sided drive system with belt transmission for 5 XPB belts, which is protected by safety devices. The gearbox transmits a power output of 60 to 120 hp. The recommended PTO speed is 540 rpm, which results in a cutting rotor speed of 2380 rpm. The cutting height can be adjusted with guide skids, and the discharge hood is adjustable in four positions. The travel speed should be adapted to the terrain and should not exceed 10 km/h. The rotors of the F2 series mowing units are electronically balanced and have replaceable pin bolts. These are mounted on robust oscillating roller bearings with seals and covers, which are housed in steel housings. Technical data Min./Recommended power 60/120 hp Recommended PTO speed 540 rpm Mounting system Three-point linkage Mowing width 200 cm Flail mower dimensions 2164 x 1010 x 1015 mm Flails 20 pcs. Gearbox Nsdpfx Aj Abnuaoi Tjwn One-way clutch Rear roller 168 mm Shaft diameter with flails 420 mm Lateral displacement 40 cm Weight 700 kg

Condition: new, Gasoline-powered welding generator – Honda GX390 engine – Asynchronous generator, three-phase – Three-phase power output: 6 kVA – Single-phase power output: 4 kVA – Maximum welding current: 155A The TS-200 BS / EL welding generator is a lightweight machine with electronic welding current control. Equipped with an 11.1 HP HONDA GX-390 gasoline engine and an asynchronous generator, it can be operated simultaneously as a welding generator and as a power generator. The TS-200 BS / EL can be used to weld all types of electrodes (basic, rutile, cellulose) up to 3.25 mm in diameter. This welding generator is suitable for a wide range of applications, from maintenance work to moderate use on construction sites. Complies with CE directives. WELDING - Adjustment range: 20 ÷ 155A - Welding DC current: 155 A 60% - 120 A 100% - Open circuit voltage: 65 V - DC arc welding generator - Welding with all types of electrodes possible, including cellulose electrodes - Welding current control - Electronic - Power generator AC, three-phase and single-phase - Auxiliary power available even during the welding phase GENERAL - Sockets: 1x400V 16A 3P+N+T CEE - 1x230V 16A 2P+T CEE - 1x48V 32A 2P CEE - Engine stops when oil level is insufficient (oil alert) - Tubular frame - Weight (dry): 106 kg - Dimensions: 870x525x590 mm - Sound power level Lwa (sound pressure LpA): 98 dB(A) (73 dB(A) @ 7 m) WELDING (D.C.): *: * Maximum power (not overloadable) according to SAE - J1349 Single-phase power output: 2 kVA / 48 V / 41.6 A Engine: Gasoline, 4-stroke, OHV, air-cooled Three-phase power output: 6 kVA / 400 V / 8.7 A Sound power level Lwa (sound pressure LpA): 98 dB(A) (73 dB(A) @ 7 m) Protection class: IP 23 Fuel consumption (welding 60%): 2 l/h */: * The specified values also include all protruding parts. / For fixed installation in the EC market. Insulation class: H * Weight (dry): 106 kg GENERAL DATA: * Dimensions L x W x H (mm): 870x525x590 Runtime (welding 60%): 3 h Tank capacity: 6.1 l Cylinder / Displacement: 1/ 389 cm³ Single-phase power output: 4 kVA / 230 V / 17.4 A Type: Honda GX 390 Speed: 3000 rpm A.C. Generator: 50 Hz - Three-phase asynchronous generator, self-excited, self-regulating, brushless Booster - Starter for engines: 170A - 12V d.c. - 24V d.c. * Maximum net power: 8.2 kW (11.1 HP) Open circuit voltage: 65 V Adjustment Nwjdpfo Abqd Djx Ai Ten

Condition: new, Heavy-duty swivel caster, D. 200 mm, load capacity 450 kg, 135 mm, 110 mm * With locking mechanism * Load capacity up to 450 kg * Sturdy steel sheet housing, galvanized and chromated * Double-row ball bearing in the fork head * Total locking mechanism * Solid rubber tire (black, permanently vulcanized) on an aluminum wheel body * Wheel axle screwed in * Ball bearing * With plate mounting * Further technical features: surface of housing: galvanized and chromated * Screw hole diameter: 11 mm * Offset: 50 mm * Screw hole distance: 104 x 78 mm * Material of housing: steel sheet Color of caster: black Wheel diameter: 200 mm Plate width: 110 mm Plate length: 135 mm Nodpfx Ae Abq Naji Tewn Material of housing: steel sheet Screw hole diameter: 11 mm Surface of housing: galvanized and chromated Material of caster: rubber Load capacity: 450 kg Screw hole distance: 104 x 78 mm Design: with locking mechanism Wheel width: 50 mm Offset: 50 mm Overall height: 245 mm

Condition: new, Heavy-duty swivel castor, D.200mm, load capacity 450kg, rubber 138mm, 110mm · Load capacity up to 450 kg · Sturdy steel sheet housing, zinc-plated and chromated · Double-row ball bearing in the fork head · Solid rubber tire (black, permanently vulcanized) on an aluminum wheel body · Wheel axle screwed · Ball bearing · With plate mounting · Further technical features: surface of housing: zinc-plated and chromated · Screw hole diameter: 11mm · Offset: 52mm · Screw hole spacing: 105 x 75mm · Material of housing: steel sheet Plate width: 110 mm Material of housing: steel sheet Color of castor: black Material of castor: rubber Plate length: 138 mm Wheel diameter: 200 mm Surface of housing: zinc-plated and chromated Load capacity: 450 kg Screw hole diameter: 11 mm Wheel width: 50 mm Overall height: 255 mm Screw hole spacing: 105 x 75 mm Nodps Abq Nyefx Ai Tewn Offset: 52 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. Nsdpjwld Upefx Ai Tswn For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm