Used Wire Bending Machine for sale (66,978)

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. Ledpfszuclisx Aa Rsrr We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: good (used), The machine is in good technical condition, testing can be arranged by prior agreement. Lredpszu Axpjfx Aa Rjr

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Lsdpfx Aaot Dk Uko Rsrr Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg Lrodpfx Aaeztvgwo Ror - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW weight of the machine ca. 2 t Lrjdeztfxijpfx Aa Rsr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Lrsdjzlc Tbjpfx Aa Rjr

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Lodpfezcpifjx Aa Rerr Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Condition: used, Year of construction: 1970, für MK3 Lsdpfxeztfzde Aa Rorr weight of the machine ca. 4 t

Condition: used, Year of construction: 1970, für MK3 Lrodpfeztfy Tex Aa Rsr weight of the machine ca. 4 t

Condition: used, Year of construction: 2001, Robust hydraulic horizontal bending machine for the precise bending of flat, round, and square steel, as well as various profiles. Suitable for workshops, construction companies, and industrial applications. Specifications: Brand: Stierli-Bieger Type: 300 HE/CE Bending force: 300 kN (30 tons) Hydraulically powered Suitable for various bending tools Lodpfxozrzlve Aa Rsrr Heavy-duty steel construction In good, working condition Includes tools!

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Lredpfx Aeztckioa Rjr Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading Ljdpfx Aaoztp Emj Rerr With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules Ledpfxjzt Ez Rj Aa Rorr :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Lredozrfpxjpfx Aa Rsr Maintenance: Regular maintenance performed.

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining Lredpfxeztn Ade Aa Rer The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 Ledjzr Uuqepfx Aa Rjrr - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: ready for operation (used), 3-Roll Round Bending Machine HAEUSLER Type KRMA 2500x10m -Both lower rolls with motorized adjustment for bending and conical bending / hinge bearing for removing the sheet metal -Number of rolls: 3 -Drive: electric -Top roll: can be swung out for removing the workpiece -Operation: separate control panel -Max. sheet metal thickness (steel): approx. 10 mm -Working width 2500mm -Top roll diameter approx. 220mm -Lower roll diameter approx. 220mm Lodpeztaa Usfx Aa Rjrr -Stroke of the lower rolls approx. 220mm Dimensions: LxWxH 4.8x1.5x1.6 meters / Weight 6500 kg

Condition: used, CNC Wire EDM Machine AccuteX AU-1000iA | Year 2007 | Large-Scale For sale: a professional, reliable, large-scale wire EDM machine from the renowned Taiwanese manufacturer AccuteX, model AU-1000iA. This machine is ideal for machining large and heavy parts, producing injection molds, dies, and tools with the highest precision. TECHNICAL SPECIFICATIONS: - Manufacturer: AccuteX - Model: AU-1000iA - Year of manufacture: 2007 - CNC control: Proprietary AccuteX (Windows CE) - Working travels (X × Y × Z): 1100 × 650 × 400 mm - Travels in cone axes (U × V): 150 × 150 mm - Cone cutting angle: ±21° (for height H=100 mm) - Maximum workpiece weight: up to 5000 kg (fixed table design, moving column) - Supported wire diameters: 0.15 - 0.33 mm - Machining type: Submerged Lsdpfx Aaszt Sine Rerr KEY FEATURES AND BENEFITS: - T-Base construction: Extremely stable body made of Meehanite castings, damping vibrations and resistant to thermal and mechanical loads. - Optical (glass) linear scale system guaranteeing repeatability and positioning accuracy at the micro scale. - Original AccuteX Wire Alignment Device for wire centering/positioning (in a dedicated box with wiring). INCLUDED WITH THE MACHINE – A RICH SET OF AUXILIARY EQUIPMENT: - Professional set of EDM clamping elements: numerous clamps, clamping jaws, positioning screws, and pins. - Precision strips and base beams for quick mounting of large parts and molds on the work table. - Additional consumable accessories and wire guiding mechanism components.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Immediately available, maintenance and safety inspection new as of July 30, 2026! Description Year of manufacture: 2014 Bending length [mm]: 1020.00 Press force [tons]: 36 Control system: TRUMPF TASC 6000 Standard equipment Machine - Stable machine frame - Press beam Ledpszrwntefx Aa Rorr - Highly dynamic, electromechanical direct drive (torque motor) - Inductive length measuring system with temperature compensation - Switch cabinet air conditioning - Ergonomic machine design Back gauge system - Rear back gauge system, 6 axes Tool clamping - Upper tool clamping, automatic - Lower tool clamping, automatic Control system - TRUMPF TASC 6000 integrated - Numerical workshop programming - Windows XPe (embedded), Pentium M with 1.1 GHz clock frequency - 1 GB RAM - 15-inch touch screen Safety - Laterally pivoting safety doors - Protective cover at the rear - 2-button foot switch, for standing and seated operation - Rear back gauge system, 6 axes Ergonomics package: - Comfort support table (front) - Comfort footrest - Work area lighting front and rear (LED) - 2 document holders - 2 storage consoles - 1 measuring tool storage Productivity-Plus package: - Graphical workshop programming - Automatic tool clamping - BendGuard (with block laser) - Swiveling control panel - Bending line laser - Seat and standing aid - OCB – Operator Controlled Bending

Condition: like new (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 1,000 kg, positioning accuracy: 0.001 mm, FOR SALE: 2017 Model Sodick AG600L Wire EDM Machine - Full Equipment & High Performance Machine Condition: Flawless, Problem-Free, Very Low Operating Hours Model Year: 2017 Power and Generator Technology: Advanced SPW (Smart Pulse) Generator: Thanks to Sodick's special discharge technology, it provides high-speed cutting while saving energy. High-Speed ​​Cutting Circuits: Reinforced generator system that increases performance by 30%, especially in thick parts and hard metals. Extra Finishing Circuit: Optimized precise energy output to achieve very low surface roughness (Ra below 0.78 µm). Equipment and Peripherals: High-Capacity Cooling Unit (Chiller): Prevents thermal expansion by keeping the dielectric water temperature constant during precise cuts and maintains micron accuracy. Advanced Filtration System: Uninterrupted production with a long-lasting and high-flow filtration tank. Automatic Water Level Control: Automatically adjusts the tank level according to the workpiece height. Power Supply (UPS/Regulator): Integrated protection systems that protect sensitive electronics against voltage fluctuations. Technical Summary: Drive System: Maintenance-free, linear motors (X, Y, U, V) with a 10-year precision guarantee. Axes: 600 x 400 x 350 mm working area. Lrsdozwd A Uopfx Aa Rjr AWT: "Super Jet" high-speed underwater automatic wire threading unit. Control: 15" Touchscreen LN2 CNC unit. Description: The machine was used in one of Türkiye's leading precision mold shops, solely for ejector and insert cutting. It was not used in subcontracting. It is a ready-to-use machine with no accidents or need for revisions, and has been maintained regularly.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation. Ledpfxsy Ib Ewj Aa Rorr

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity. Ljdpfx Aozn Rdmea Rsrr

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Lredezrh N Uepfx Aa Rjr Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2004, Some information regarding the condition: Classic-3S • High-pressure pump defective (pictures attached); the machine has been operating without issues up to now. • 08.08.2023: X and Y spindles overhauled, resulting in backlash-free operation. • 07.10.2024: New U-motor installed. Progress 2 Lodpezr Urcefx Aa Rorr • Machine is functional and cuts smoothly at low generator settings and during finishing operations. • Problems occur at high roughing settings, as the lower gap box is defective. • 26.06.2023: X and Y spindles overhauled, resulting in backlash-free operation. • September 2024: New U-motor installed. • September 2025: New Z-motor installed and timing belt replaced.

Condition: good (used), Year of construction: 2016, Machine parameters: Travel in the X, Y, and Z axes: 900 x 900 x 900 mm Description: The machine is in good working condition, and a test run can be arranged upon prior agreement. Lrodpeztydtsfx Aa Ror