Used Wmw Sk45 Verschiedene Ausführung for sale (1,399)

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Cutting nozzles: Flame cutting nozzles 56 pieces unused Ovp -Type/Quantity: see photos/parts list -Cutting range: 2 - 250 mm -Price/Delivery: complete -Transport dimensions: 200/150/H50 mm -Weight: 0.8 kg Fedpfjw Udkujx Afuepn

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition Fpedjy Ra D Dspfx Afujn

Condition: used, Centerless grinders SASL 125 1A, 200x300, 125x250, KCH 63 Fpjdpfx Afocup D Neuen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. Fedpfx Afozh Dtzsuopn The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Fpedpfxev Exths Afusn

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Fpodpfegbgawex Afusn Digitaldisplay for 2 advertisement vertical infeed

Condition: used, Year of construction: 1978, x-travel 820/850 mm Fpodjxxb Htspfx Afuen y-travel 300/330 mm z-travel 485/505 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1670 x 1620 x 2500 m Further techniscal detals please consider pictures

Condition: used, Walter SL60 T press Fpsdpfxjzlc Eqs Afujn Peddinghaus punching machine Longitudinal seam welding machine NC milling machine FP 4MA CNC milling machine DMC63V Circular saw automation system KKS 45R MAG welding automation system Fronius Vario Star MAG welding automation system Fronius Vario Synergic

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip Fsdpfx Afjy A Inujuopn -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm -Weight: 23.7 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories Fedpfovbbmcox Afujpn -Weight 14.4 kg

Condition: used, Type BF 63 Fpsdpfxewrpy Ro Afuon Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Drilling travel: 560 mm Table load capacity: 2000 kg Rotary table: 360 degrees

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Fsdpjwndnuefx Afujpn Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Fsdpfex Acpdjx Afuepn Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm Fodpfx Afexm Rzieuepn -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: good (used), Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm Fpjdovu Tv Nopfx Afuon -Dimensions: 710/130/H115 mm -Weight: 9.7 kg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, tapping attachment Fjdpsv Uxb Rjfx Afujpn -Tapping attachment: Holder: MK4 -Reversing gear: Quick return integrated -Clamping diameter: 21 mm -Dimensions: 260/105/H310 mm -Weight: 6.8 kg

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 mm -Weight: 23.5 kg Fpodpfx Afevcxhgjujn

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade Fpodpfx Aowy N Spofuon -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 80 mm -Bolt circle: Ø120 x 22 mm -Number of teeth: 132 teeth -Number: 11x saw blades available -Price: per piece -Weight: 10.7 kg

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) Fedpfx Ajv H D N Refuspn -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm Fpsdpfxsrhmnas Afuon -Weight: 5.9 kg

Condition: used, Grinding wheels, grinding wheels, cup wheel, double grinding stand, cylindrical grinding machine, surface grinding wheel -Grinding discs: Abrasive discs 5 pieces, different versions -Outer diameter: 400 to 485 mm, width 85/95 mm Fpodpfxequx N Es Afuen -Receptacle: Perforated shaft cone Ø47-55 mm, thread M60 x 1.5 see photos -Dimensions: see photo parts list -Price/tax: complete -Transport dimensions: 970/500/H300 mm -Total weight: 165 kg

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Fpjdpfx Aeqy E I Rofujn

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm Fjdpfx Afjrv Avgouepn -Weight: 3.5 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus Fedorv Avvepfx Afuopn -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Fedpfx Aog Rczfjfujpn -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg