Used Xton Automatic Basket Washer for sale (22,817)

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Laodpodzc Rxefx Amted Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Lsdpfx Asriuutsmtjad Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. Lodpov Aalyefx Amtead - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Lajdpfxsru Evgo Amtjd Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Lodpfx Ajn Nv Tismtsad Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Ljdpjb Tmwaefx Amtead Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. Lasdpfxswl Hyuj Amted 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: used, In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Lsdpfx Aszna S Hsmtoad Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2019, operating hours: 37 h, Manufacturer: K+G Wetter Model: AW U200 Year: 2019 Condition: Used Serial Number: 430/2009 Stock Number: 3399 Hole plate diameter: 200 mm Hopper: 360 litre Laedpszl D H Nofx Amtod Working hours: Only 37 hours! Power: 3 x 400V, 50Hz, 52.1kW Dimensions: 3550 x 1500 x 2200 mm Weight: 2400 kg With tensioning device for precutter, bayonet lock nut, sorting device and fill sensor on hopper. Including lifter for 200L tote bins and tool trolley. For fresh and pre-cut frozen product.

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Lajdpfx Amexztfastod Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Ljdsznlbajpfx Amtjad Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system Lajdpfxsxv Sr Ij Amtsd In good condition, operated without loader, not under power

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The line is also equipped with a combined metal detector and checkweigher for automatic detection and rejection of metal contamination and underfilled or overfilled packages, ensuring consistent product quality and compliance with food safety standards. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. Laodpsznlbgofx Amted If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! Ljdpfx Ameznc R Setead According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: refurbished (used), Divided into 30 parts Weight range: 32-70 g/pc. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor Lsdpfxett Am Uj Amtsad serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330

Condition: used, Year of construction: 2006, Year: 2006 Condition: good Configuration: - automatic setup – pockets - automatic setpup - rollers - pallet feeder - number of pockets: 6 - cross fold - knife / pocket / knife - touch screan - Delivery is NOT included Lsdpfexfi Rajx Amtoad Specification: - max. size - 780 x 1120 mm - production max. - 215 m/min

Condition: good (used), Year of construction: 2008, Eberhardt Piccolo 4 semi-automatic bun divider - used Lodeznwlwspfx Amtsad - year of manufacture: 2008 - technical condition: good - weight range: 40-140 g - power supply: 400 V - 2 working trays - machine from production - price on request

Condition: used, functionality: fully functional, AMBAS BANDSAW AUTOMATIC TYPE MODEL: SN/AU 250 2C Lasdpfx Aszmxbqjmtjd USED MACHINE INTERNAL CODE: SVR 422

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Automatic cold circular saw - CNC control Lsdpfxozlkvdj Amtjad - Micro-lubrication system

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Technical data: Tank capacity 140L Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Ljdpsrh Ey Refx Amtjad Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, This cabin pressure washer made of high-quality stainless steel is a tool that raises cleaning standards to a new level. Designed with professional applications in mind, this washer offers reliability, durability and performance. Made from high-grade stainless steel, it provides durability and resistance to environmental conditions, ensuring long-lasting performance even in the most demanding working conditions. Unit description: With a robust stainless steel construction, our cabin washer is corrosion resistant and provides long-lasting performance even in harsh environments. Equipped with advanced pressure technology, it provides effective removal of dirt, oil, grease and other contaminants from a variety of surfaces. Our cabin pressure washer is an essential tool for businesses that value cleanliness, efficiency and reliability. It will make cleaning tasks easier, faster and more efficient, resulting in customer satisfaction and improved productivity. Cleaning takes place in a closed circuit, using a washing liquid heated to as much as 70 degrees Celsius. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is equipped with a dual-function gun from which either air alone or air with detergent can be discharged. This allows the washed object to be dried with compressed air. Ledeuc Tpyspfx Amtead Using a cabin pressure washer made of stainless steel has many advantages, including: 1. thanks to the high water pressure combined with detergents, the washer removes even the most stubborn dirt such as oil, grease and rust, ensuring clean and shiny surfaces. 2. the cabin washer enables larger surfaces to be cleaned quickly and effectively in less time than traditional manual cleaning methods. 3. with different pressure setting options, the washer can be adapted to different types of surfaces and types of dirt, making it a versatile cleaning tool. 4. made from high quality stainless steel, the washer is corrosion and damage resistant, ensuring a long service life and minimising the need for maintenance. 5. the cabin washer is easy to operate, allowing operators to quickly learn how to use it and achieve professional results without lengthy training. 6. with its fast and effective cleaning, the cabin washer contributes to increased productivity, which can lead to time and cost savings for the company. Using a cabin pressure washer is not only an investment in cleanliness, but also in efficiency and durability, which translates into benefits for both companies and individual users. Parameters of the MP180 pressure washer: Washer capacity 180 litres Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Lodpfevugwmex Amtead Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Dimensions: 770x610x700mm

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. The device requires self-assembly. Technical data: Bathtub capacity 80L Maximum pump capacity 10-12 l/min Laodpfxjvugvvj Amtsd Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Condition: excellent (used), Year of construction: 2013, operating hours: 53,000 h, Year 2013 Operating hours: 53,000 Lsdpfx Amjznmr Hetead 10 controlled linear axes Bar diameter capacity: ø25.4 Complete with IEMCA MINIBOSS 325r bar feeder.

Condition: good (used), Year of construction: 2014, The machine is in good working order, and can be tested upon prior arrangement. It features a Fanuc 0i-TD control system. Ljdpfsznl Iyjx Amtoad