Used 630 / 18,5 Kw for sale (36,069)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Lhjdpfx Ajzdny Remmsh Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design Lhedpozfi Dtsfx Ammoh High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers Lhedpsy Rrr Hefx Ammoh - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: excellent (used), CATALOG NUMBER 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (L/W/H): 120x80x700 mm - Engine dimensions (L/W/H): 550x1050x700 mm - Weight: 630 kg ADVANTAGES – Used engine – Very good condition Lhjdpox Uz Sqefx Ammoh Net price: 10,900 PLN Net price: 2,590 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h Ledpozdt E Sjfx Ammjhh -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump Lhedezdt Efjpfx Ammeh -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm -Weight: 169 kg

Condition: used, Year of construction: 2001, We are selling grinding and regulating wheel spindles for a Lidköping CL 630. The machine is no longer for sale! Only the spindles Lhjdpfx Amerf Ukqjmeh 6x regulating wheel spindles 8x grinding wheel spindles Individually or in a package

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² Ljdpsb Nx Hmefx Ammehh -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Quantity: 1x cooler available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Condition: excellent (used), Year of construction: 2018, electric motor, three-phase motor -Manufacturer: Weg, electric motor type W20-250S/M-04 -Power: 55 kW -Speed: 1485 rpm -Shaft: Ø 65 x 135 mm -Design: B3 -Protection rating: IP55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 920/920/H505 mm Ledpfxszdq Tyj Ammshh -Weight: 422 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm Lodpfxozdq R Ej Ammshh -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg Ljdpfx Amozdq Rlomjhh

Condition: used, mileage: 39 km, power: 150 kW (203.94 HP), fuel type: electric, first registration: 03/2026, color: blue, number of seats: 5, Equipment: ABS, air conditioning, navigation system, * 30-color ambient lighting * Armrests for front seats on both sides * Heated windshield in heat-insulating glass * Lumbar support, pneumatically adjustable on both sides * Seat heating for both seats in the cab, separately adjustable left and right * App-Connect incl. App-Connect Wireless for Apple CarPlay and Android Auto * 9 speakers (5 speakers at the front and 4 speakers at the rear) * Digital radio reception (DAB+) * "Comfort" cell phone interface with inductive charging function * "Discover Pro" navigation system * Anti-lock braking system (ABS) * Airbags for driver and front passenger, with front passenger airbag deactivation * Automatic distance control ACC "stop & go" with speed limiter * Anti-theft alarm system with interior monitoring, back-up horn and towing protection * Travel Assist driver assistance system including Lane Assist lane departure warning system and Emergency Assist * Front Assist emergency brake assistant with pedestrian and cyclist detection * Automatically dimming interior safety mirror * Proactive occupant protection system in conjunction with Front Assist * Electromechanical power steering, speed-dependent control * Rear view camera * Intermittent windshield wipers with rain sensor * "Side Assist" lane change assistant * Traffic sign recognition * 11 kW AC charging power (alternating current) * USB-C interfaces * 4 "Solna" alloy wheels 8 J x 20 at the front, with 10 J x 20 at the rear, in black, high-sheen finish * Folding towbar, with electric unlocking system * Changing the surround of the infotainment display, central controls and steering wheel from electric white to black * "Plus" assistance package including "Area View" with "Rear View" reversing camera * Evasion support and cornering assistant * Convex exterior mirrors on driver's side, convex on passenger's side * Electrically adjustable, folding and heated exterior mirrors, with lowering front passenger mirror * Three-point automatic front seat belts with belt tensioners and height adjustment * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * Black surround for the infotainment display and central controls * Electric tailgate (opening and closing) with "Easy Open" and "Easy Close" function * Electric motor system output 150KW Basic motor is: N06/N07 * Transmission for electric drive (1-speed) * HT - LED matrix headlights with automatic headlight switching, bad weather light, welcome function * Air Care Climatronic air conditioning system with active combi-filter, stationary air conditioning and 2-zone temperature control * Comfort seat left and right, in the 1st row of seats * Short wheelbase, hatchback * LED luggage compartment lighting * Light alloy wheels "Solna" 8 J x 20 front, 10 J x 20 rear, in black, high-sheen finish * Headlight range adjustment, dynamic, with dynamic cornering lights Lhedpfxjwz T Epe Ammoh * Memory function for "Park Assist Plus" parking assistant * Multifunction steering wheel in imitation leather, with touch controls, heated * LED tail lights with dynamic blinker lights * Park Assist Plus parking assistant incl. parking aid * "Ready 2 Discover" radio with 30.48 cm (12") touch color display * Wheel bolts with extended anti-theft protection * Rear View reversing camera as an alternative to the Area View in the "Plus" assistance package * Rear windows in darkened heat-insulating glass * Electric sliding door left & right * Tire monitoring display

Condition: used, Drive . kW Capacity . kg/h material . 6 pieces originally for manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Ljdpfx Aezdu Tqsmmohh Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . Bandages Trelleborg 2 pieces Lhsdpfx Amjzdu Tkomsh Bandages Vorwerk 2 pieces For AMP 1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Ljdpfxjzdu Sms Ammehh than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces For Manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lhsdpezdu Sgsfx Ammoh If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer gearbox Bonfiglioli type: MVF49/F -Manufacturer Engine Fimet Type: MOF71A4 -Speed: 197 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: Ø 18 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 400/198/H200 mm Lhsdoci Dk Ujpfx Ammsh -Weight: 16.3 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller Lhjdpewcx Rmsfx Ammoh -Manufacturer: KEB, Frequency converter Drive Controller Combivert Type: F4 -Part No.: 16 F4 C1G-M440/2 2 -Power: 23 kVA / 15 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 415/180/H335 mm -Weight: 14.9 kg/pc.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix Lsdpotp Hgzefx Ammjhh 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Q 33.0 m³/h P 15,0 kW Lhedjikwapspfx Ammeh max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: good (used), Year of construction: 2005, I will sell Remak 29.5KW. Efficient. Lodpfx Aev H Silommehh

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Lhedpfew Ixw Asx Ammeh Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor Lhedpfx Amex Rw H Njmoh -Speed: 54 rpm -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts Lodpfx Aozf Adgemmjhh If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: good (used), Pump performance data: Flow rate 262 l/min, operating pressure 1040 bar, motor speed 1800 rpm, crankshaft speed 465 rpm, piston diameter 50 mm, required motor power 497 kW. Diesel engine: Manufacturer Volvo, type TAD 1643 VE-B Stage II / Tier 2, engine number 2016121993, voltage 24 V, power output 565 kW, speed 1800 rpm, idle speed 900 rpm. WITHOUT truck; the truck is not for sale. Year of manufacture 2020. Lhedpszf Rqbefx Ammeh