Used 4-Roll Plate Bending Machine for sale (105,919)

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø Todpskvm S Nefx Antob 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 83800 € 1583.82 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation Tsdpsypbp Dofx Antsb adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Tsdokwcc Nopfx Antsb Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST Todpfx Aexacdvonteb diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls Tsdpfx Ajyvvrbjntob

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers Tjdpfsy Ezzyjx Antjb - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: refurbished (used), BENDING ROLL MACHINE ROUNDO SHEET METAL LENGHT 2500mm Tedpfohx N Uksx Anteb SHEET METAL THICKNESS 30/25mm 3 ROLLS WEIGHT: 19.000kgr

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 27800 € 530.98 € 3030 mm 4 mm 4 mm 2 mm 180 mm 4 kW 4600 mm 1120 mm 1020 mm 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Tedpfeynm Ezox Antjb Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine Tedpfxjv Tpxqo Antsb -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 × 1.8 mm – Bending capacity 1050 × 1.5 mm Todpfx Anoyrn Ixetob – Roll diameter 70 mm – Minimum bending diameter 105 mm – Conical rolling – Swing-out upper roll – Brake motor – Foot control – Emergency stop – Documentation – 400V

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Working length 1020 mm Maximum sheet thickness 1.25 mm Tedpfx Aey Rx Dcsnteb Good, fully functional condition.

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Tedpfx Anoxwqdrjtjb

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm Todpfxezwuu Uo Antsb -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Tjdpfxoxaawgj Antjb Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,39 t dimensions of the machine ca. 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller Todpfjrb Hcfjx Antsb - Emergency release safety device - Documentation - 400V

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven Tsdjyvvrhopfx Anteb - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 3 mm – Electrically adjustable rear roller – Digital display – Hardened rollers – Conical bending – Swiveling upper roller Tjdpoxiyw Esfx Anteb – Brake motor – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: excellent (used), Year of construction: 2007, Akbend ASM140 Bending Rolls 3 Rolls Todpfszxtbvjx Anteb 140mm top roll 1250mm length x 5mm thickness Year 2007 Motor power 2.2kw

Condition: new, sheet width 700 mm plate thickness 2,0 mm Tedpfxjrrkdko Antsb distance between columns 750 mm diameter of upper rolls 76 mm total power requirement ß,75 KW weight of the machine ca. 0,29 t dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel Tsdpfx Aoxpqy Djntsb - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Todpszi Ra Rsfx Antjb Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM Tjdpfx Anow Ty Dujtjb year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Todpfszguumox Anteb Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures Tjdpjcx T E Refx Antsb -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 275 Hydraulic Side Roller Adjustment 3 Digital Displays Hydraulic Drop-End Hardened Rollers Todpfjxrduyox Antjb Cone Bending Device Separate Control Console Roll Length: 3070 mm Top Roller Diameter: 275 mm Side Roller Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 10,300 kg Dimensions (mm): 5900 x 1750 x 1860 (L x W x H) Bending Performance Data 12 mm at minimum inner diameter (5 x top roller) 10 mm at minimum inner diameter (1.5 x top roller) Pre-bending Performance Data 10 mm at minimum inner diameter (5 x top roller) 8 mm at minimum inner diameter (1.5 x top roller) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.