Used Aircooled Condenser for sale (1,048)

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Pgsdpfx Aiezd Axbj Teu Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C Podpfx Aioy Hkd Hs Tsgu with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Pjdpfxszfy Rwj Ai Tsgu Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Pgjdpezg Er Ajfx Ai Tju Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Podpfx Aey Ef Ttei Tjgu

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Used bottle washer dryer GAI - 3500 BPHTechnical Specifications & Performance DataThe Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing.Model: 5008Year of manufacture: 2002Production speed: up to 3,500 bottles per hourBottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formatsBottle geometry: Cylindrical containersBottle diameter range: 60 mm to 115 mmDrying technology: Rotary carousel (hot air) with anti-condensation featuresPLC installed: NoDocumentation: Paper manuals and electrical schematics availableAdvanced Automation & Control SystemsThe 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs.Production Line Integration CapabilitiesThis rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats.Machine Condition & Maintenance HistoryThe machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility.Operational Performance & VersatilityThe hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of win... Pgedpoz E Dlvjfx Ai Tou

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 1 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Pjdsz Sz Tfspfx Ai Tjgu Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Air receiver: 200-liter capacity Pressure dew point (refrigeration dryer): + 3°C Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2026 Operating hours: 1 hr Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Pgodpfxehwwyrj Ai Teu Visit our store. We always have a wide range of new and used compressors in stock!

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, Podpeibh Tkefx Ai Tjgu including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Psdpfx Aeu D Arioi Tjgu Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Pedpfx Aozrlzzei Togu Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Energy-saving thanks to the use of IE2 motors. Low wear due to very low compressor speed. Low-noise operation and high smoothness. In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve Pjdpfx Aio Abn His Tsgu • 3 m connection cable with plug For stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Intake capacity l/min: 300 Delivery rate l/min (at 7 bar): 210 Motor power kW: 1.5 Rated voltage V/Hz: 400/50 Compressor speed min: 1,350 Max. pressure bar (g): 10 Tank capacity l: 50 Stages: 1 Weight kg: 60 Dimensions l/w/h in mm: 970/430/810 Delivery rate l/min (at 7 bar): 210 Tank capacity l: 50 Compressor speed min: 1,350 Rated voltage V/Hz: 400/50 Intake capacity l/min: 300 Motor power kW: 1.5 Dimensions l/w/h in mm: 970/430/810 Stages: 1 Max. pressure bar (g): 10 Weight kg: 60

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of tank sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile units in the tank size range of 50 - 200 l: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch Podpfx Ais Abn Igo Togu • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the tank size range of 50 - 500 l: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Intake capacity l/min 560 Delivery rate l/min (at 7 bar) 400 Motor power kW 3 Rated voltage V/Hz 400/50 Compressor speed min 1,215 Max. pressure bar (g) 10 Tank capacity l 200 Stages 2 Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Intake capacity l/min: 560 Delivery rate l/min (at 7 bar): 400 Max. pressure bar (g): 10 Tank capacity l: 200 Weight kg: 148 Rated voltage V/Hz: 400/50 Compressor speed min: 1,215 Stages: 2 Dimensions l/w/h in mm: 1,400/550/1,050 Motor power kW: 3.0

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Low-noise operation and high running smoothness In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve From 5.5 kW motor power: • Automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 380 Delivery rate l/min (at 7 bar) 280 Motor power kW 2.2 Rated voltage V/Hz 400/50 Compressor speed min 855 Max. pressure bar (g) 15 Tank capacity l 100 Stages 2 Weight kg 92 Dimensions l/w/h in mm 1,080/510/1,120 Delivery rate l/min (at 7 bar): 280 Tank capacity l: 100 Dimensions l/w/h in mm: 1,080/510/1,120 Weight kg: 92 Motor power kW: 2.2 Rated voltage V/Hz: 400/50 Stages: 2 Suction capacity l/min: 380 Podpfs Abn Sxsx Ai Tegu Max. pressure bar (g): 15 Compressor speed min: 855

Condition: new, Energy-saving due to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high running smoothness In the lower range of pressure tank sizes, up to 200 liters, they are available in mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 l • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 l • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 460 Delivery rate l/min (at 7 bar) 340 Motor power kW 3.0 Rated voltage V/Hz 400/50 Compressor speed min 990 max. pressure bar (g) 15 Tank capacity l 200 Stages 2 Psde Abn S Eepfx Ai Tjgu Weight kg 148 Dimensions l/w/h in mm 1,400/550/1,050 Motor power kW: 3.0 Stages: 2 Weight kg: 148 Tank capacity l: 200 max. pressure bar (g): 15 Dimensions l/w/h in mm: 1,400/550/1,050 Rated voltage V/Hz: 400/50 Delivery rate l/min (at 7 bar): 340 Compressor speed min: 990 Suction capacity l/min: 460

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and smooth running In the lower range of pressure vessel size, up to 200 liters, they are available in either mobile or stationary versions. for mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug Pjdpfxe Abn Ite Ai Tsgu • Relief valve Intake capacity l/min: 730 Delivery rate l/min (at 7 bar): 580 Motor power kW: 4 Rated voltage V/Hz: 400/50 Compressor speed rpm: 990 Max. pressure bar (g): 10 Tank capacity l: 300 Stages: 2 Weight kg: 197 Dimensions l/w/h in mm: 1,350/700/1,360 Rated voltage V/Hz: 400/50 Max. pressure bar (g): 10 Compressor speed rpm: 990 Tank capacity l: 300 Dimensions l/w/h in mm: 1,350/700/1,360 Weight kg: 197 Delivery rate l/min (at 7 bar): 580 Motor power kW: 4.0 Intake capacity l/min: 730 Stages: 2

Condition: new, Energy-saving due to the use of IE2 motors. Low wear due to very low compressor speed. Quiet operation and high running smoothness. In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. for mobile versions in the pressure vessel range of 50 - 200 l: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure vessel range of 50 - 500 l: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve Intake capacity l/min 730 Delivery rate l/min (at 7 bar) 580 Motor power kW 4 Pgsde Abn Iyepfx Ai Tju Rated voltage V/Hz 400/50 Compressor speed min 990 Max. pressure bar (gauge) 10 Container volume l 300, vertical Stages 2 Weight kg 223 Dimensions l/w/h in mm 770/800/2.110 Container volume l: 300 Intake capacity l/min: 730 Dimensions l/w/h in mm: 770/800/2.110 Max. pressure bar (gauge): 10 Rated voltage V/Hz: 400/50 Weight kg: 223 Delivery rate l/min (at 7 bar): 580 Compressor speed min: 990 Stages: 2 Motor power kW: 4.0

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Quiet operation and high smoothness In the lower range of pressure tank sizes up to 200 liters, they are available in either mobile or stationary versions. for mobile units in the pressure tank range of 50 - 200 l • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 l • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 950 Delivery rate l/min (at 7 bar) 700 Motor power kW 5.5 Rated voltage V/Hz 400/50 Compressor speed min 860 max. pressure bar (g) 15 Tank capacity l 500 Stages 2 Weight kg 325 Dimensions l/w/h in mm 2,000/700/1,520 Compressor speed min: 860 Rated voltage V/Hz: 400/50 Motor power kW: 5.5 Tank capacity l: 500 Stages: 2 Psdpfxo Abpcfe Ai Tjgu Suction capacity l/min: 950 max. pressure bar (g): 15 Dimensions l/w/h in mm: 2,000/700/1,520 Delivery rate l/min (at 7 bar): 700 Weight kg: 325

Condition: used, Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot dishwasher that can wash with or without granulate. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a pass-through model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinner technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW liquefaction system. No pre-washing or manual scrubbing thanks to powerful washing with water and granulate. Pgjdpfjf Hp Tpjx Ai Teu High hygiene and fast drying with spin cycles. Heat recovery and a condensation battery reduce steam in the room. Complete dishwashing system with loading table and cart. Easy maintenance – can be performed from the front or from the side. Effective dishwashing and high capacity with a double washing system. You can find more dishwashers in our shop. International shipping on request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Pgsdoyk Sknepfx Ai Tsu

Condition: used, Year of construction: 2023, Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible. Psdpfx Aez R Uwpei Tsgu

Condition: used, mileage: 164,000 km, power: 310 kW (421.48 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, total length: 11,600 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 9,428 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a comprehensible service history at our company! Certified Oren Topliner with swivel wall body and rear cargo securing Tail lift BÄR 2,500 KG STEERING AXLE Rear view camera Navigation system FULLY AIR-SUSPENDED 23 EURO parking spaces Special equipment: Storage compartment in the center tunnel, front axle load 8.0 t, equipment package: Driving, sun visor for side windows, driver and passenger door, sun visor for side window, driver's door, exterior mirror camera MirrorCam, battery 220 Ah (AGM), CB radio, cockpit multimedia system, interactive, navigation system, remote monitoring function Remote Online, air horn, driving assistance system: turning assistant, cab: steel-sprung, comfort, vehicle without rear underrun protection, transmission 12-speed - type: G 211-12, fenders 3-piece, fenders 3-piece with splash guard, fuel tank: 390 liters aluminum, left, air intake from the front, air deflector on the roof (lockable), trailing axle 7.5 t, steered, unladen, liftable, wheelbase variant 5800 mm, frame overhang 2850 mm, reversing warning system, audible and flashing lights (external warning signal), switch for tail lift, interface for fleet management system, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat comfort suspension seat, exterior sun visor, 12V / 15 A socket in the passenger footwell additionally, 24V socket in the passenger footwell additionally, preparation for 4 surround cameras (display in the on-board monitor) Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros cab S / M, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exhaust to the right outside, exhaust system two-piece, batteries arranged side by side, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entrance fixed, cab: tilting mechanism hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab variant: M, stowage compartment outside left, stowage compartments with lid behind driver and passenger seat, air intake behind the cab, vehicle outline lights LED, suspension: air / air (fully air-suspended), power windows, windshield tinted, vehicle without rear window, generator 100 A, speed limiter, urea tank (AdBlue): 60 liters, rear axle differential 440, body / superstructure: chassis, comfort central locking, steering power pump unregulated, steering oil cooler, air compressor 2-stage, air dryer heated, engine 12.8 liters - 310 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger swivel seat, splash guard front, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 12V socket in the passenger footwell, tachograph / EC control unit, Truck Data Center 7 (fleet management system), front underrun protection, preparation for Psdpfx Aey Ng N Dji Tjgu

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) Pedpfezgci Ejx Ai Tjgu (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 16,926 km, power: 170 kW (231.14 HP), color: white, gearing type: mechanical, total length: 59,490 mm, total width: 25,300 mm, total height: 26,550 mm, loading space length: 40,000 mm, loading space width: 23,500 mm, loading space height: 4,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number). Mercedes-Benz Atego 823 K 4x2 Tipper A1M Front axle, 4.1 t, A2B Rear axle, crown wheel 325, hypoid, 6.2 t, A2Z Differential lock, rear axle, A5R Axle ratio i = 3.909, B1B Electronic braking system with ABS and ASR, B1D Electronic compressed air supply unit, medium, B1F Heater, electronic compressed air supply unit, B2A Disc brake, on front and rear axles, B4A Condensate monitoring, for compressed air system, B5B Trailer brake, 2-line, C1D Wheelbase 3020 mm, C6B Steering system ZF 8095, C6S Stabilizer, for extreme high load, rear axle, C7A Rear underrun protection (ECE), C7E Front underrun protection (ECE), steel, C7H Protection device, side, C8J Splash guard, in fender, D1C Driver's air suspension seat, comfort, D1U Passenger's fixed seat, standard, D1Z Center seat, with 3-point safety belt, D3Q Seat cover, velour, driver's seat, D3T Seat cover, velour, passenger seat, center seat, D4A Standard cockpit, D4W Window lift, electric, on both sides, D6F Air conditioning, D6Z Construction site filter, D7L Storage compartment, above windshield, 1 compartment, D8A Roof hatch/vent flap roof, E0Y Battery cover, E1F Batteries 2 x 12 V/140 Ah, maintenance-free, E1N Generator 28 V/100 A, E3H Additional socket 24 V/15 A, additional, in cab, E3I Additional socket 24 V/15 A, cab, E5A Switch No. 1 for external bodywork electrical system, E6A Trailer socket 24 V, 15-pin, E6G Trailer socket 12 V, 13-pin, frame-mounted, LED, E6Z Reversing warning device, F1X S-cab ClassicSpace, 2.30 m, tunnel, F4I Cab rear wall, with window, F5L Sun visor, exterior, transparent, F6C Windshield tinted, F6I Front mirror, heated, F6J Main mirror, electric, driver's side, F7V Cab entry, two-step, F8E Locking system, with central locking, F8V Light sensor, F8W Rain sensor, G1D Transmission G 90-6/6,70-0,73, G5H Gear shifting, manual, I0I Tires tubeless, 235/75 R 17.5 front, I4A Wheel formula 4x2, I6W Leaf spring suspension, rear axle, J1A Combination instrument, 10.4 cm, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2K Loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S Radio, with USB port and Bluetooth, J8Y Pre-installation for Truck Data Center 7, J9D Pre-installation for toll collection, J9K Pre-installation, universal, for multimedia use, K0E Plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M Tanks, lockable, K5S Protective cap for AdBlue dosing system, K7I Exhaust system, on frame right, tailpipe inwards, L0A Lighting regulations, according to UN-R 48.06, L1C LED daytime running light, L1H Fog lamps, halogen, L1Y LED light package, front, with white indicator lenses, L1Z Indicator lenses, white, L2H Side marker lights, flashing, L2P LED outline marker light, L3E 1 work light, rear wall top, L9A Pre-installation for rotating beacons, M0S Noise encapsulation, according to ECE, M1K Engine OM934, R4, 5.1 l, 170 kW (231 hp), 900 Nm, M5C Engine version Euro VI, D, M5V High Performance Engine Brake, N0I Air compressor MB 60-1c, pump, N8C Meiller pump, 5-piston, type 254/1, P0D Factory tipper, Meiller, P0V Ladder, on tipper body, P0W Cover, for aggregates, P2Q Standard three-sided tipper, 4000 x 2350 x 400 mm, P5Q Lashing recesses, in tipper body floor, P6I Side board height 400 mm, P7M Front wall height 700 mm, P8B Front wall, with tube support, P8Y Hydraulic connection, tipper trailer, Q1D Front spring 4.0 t, parabolic, Q2C Rear spring, 5.7 t, parabolic, Q7B T Pgodpfez Dz Avex Ai Tou

Condition: new, Year of construction: 2026, operating hours: 1 h, Exhibit model available for immediate delivery: New Kaeser SK 26 T - 12 bar rotary screw compressor with integrated refrigeration dryer with electronically level-controlled condensate drain with Sigma Control 3 controller Year of manufacture: 2026 Operating hours: 1 • Max. pressure: 12 bar • Rated power: 15 kW • Delivery rate: 2.07 m³/min • Noise level: 67 dB(A) • Compressed air outlet: 1" • Pressure dew point: +3°C • Condensate drain: ECO Drain Dimensions (L x W x H): 750 x 1230 x 1245 mm Weight: 395 kg Convenient leasing options for new machines are available through our partner bank. Visit our showroom. Pgsdpfx Ais Adtf No Tsu We always stock a wide selection of new and used compressors!