Used Allround Rollensortierer for sale (171)

Condition: used, mileage: 159,684 km, power: 100 kW (135.96 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,274 mm, total width: 2,052 mm, total height: 2,697 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN Special equipment * Storage compartment on the dashboard with USB connection * Body manufacturer interface Iedpezt Ufrjfx An Ijbc * Parking assist system, rear * Rear doors - opening angle 260 degrees * Wooden floor in the cargo area * Automatic climate control with 170 ccm cooling compressor * Load area light outside above the rear doors * Steering column adjustable in height/length * Light and rain sensor * Radio HI-Connect 7" color display, Bluetooth hands-free system, Apple CarPlay & Android Auto, multifunction steering wheel * Rear view camera * Side paneling, plastic, including 1 row of strap rails and wheel arch lining Standard equipment * Trailer stabilization program (TSM) * Trailer socket preparation * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Version: S-series * Exhaust pipe on the left side * Exterior mirrors, electrically adjustable and heated * Brake assist system * Ceiling light in the cargo area * Electronic brake force distribution * Electronic stability program (ESP) * Driver assistance system: hill start assist (AAS) * Rear axle suspension: leaf spring * Front axle suspension: transverse leaf spring * Power windows * Windshield and side windows tinted * Generator 210 A * Speed limiter 160 km/h * Transmission: automatic - Hi-Matic (8-speed) * Urea tank (AdBlue): 20 liters * Body/superstructure: box van, high roof, standard * Fuel tank: 70 liters * Engine: 2.3 liter - 114 kW diesel * Wheelbase: 4100 mm * Diesel particulate filter * Low emission according to emission standard Euro 6d-TEMP * Sliding door, cargo area, right * Seats in the cab: passenger double seat * Daytime running lights * Maintenance indicator * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN The vehicle is located in our external warehouse, so please contact us to arrange a viewing. Thank you very much! Subject to prior sale and errors in this offer. The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The equipment may need to be checked separately.

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Ibedpfsygw Siox An Isc

Year of construction: 2003, condition: used, Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible. Ibedpozun Upofx An Ioc

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Köckerling Allrounder flatline telescopic drawbar KAT III track eradicator / hydraulic coulter set HM goose foot coulter Hydr. system FW with roller DSTS roller / compressed air brake Following harrow DSTS roller Lighting with track eradicator / Isdpfstp Hl Rex An Iobc

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Ibedpfx Ansxrf Nlj Ioc

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Iodpfx Aoyddzfen Iebc

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Ibodjw Rqwtjpfx An Ioc

Condition: used, mileage: 239,385 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,298 mm, total width: 2,350 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer a well-maintained vehicle for sale. If you are interested in this vehicle, please contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. VEHICLE IS LOCATED IN DRESDEN Iodszt Uffopfx An Ijbc VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN The vehicle is located at our external storage facility; therefore, please contact us to arrange a viewing. Thank you! We expressly reserve the right to sell the vehicle prior to sale and for any errors in this offer. The vehicle description serves only to generally identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The information provided does not claim to be complete. The information/descriptions and images provided do not serve as guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The equipment may need to be checked separately.

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Ibodpfx Aeyddy Usn Ioc

Condition: used, mileage: 237,607 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,298 mm, total width: 2,350 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. VEHICLE IS LOCATED IN A WAREHOUSE VEHICLE IS LOCATED IN A WAREHOUSE VEHICLE IS LOCATED IN A WAREHOUSE Ibedpfxszzub Ne An Isc The vehicle is located in our external storage facility, so please contact us to arrange a viewing. Thank you very much! We reserve the right to sell the vehicle prior to sale and to correct any errors in this offer. The vehicle description serves only for general identification of the vehicle and does not constitute a guarantee in the legal sense. The information provided does not claim to be complete. The information/descriptions and images provided do not serve as guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The equipment may need to be checked separately.

Condition: used, mileage: 305,009 km, power: 100 kW (135.96 HP), first registration: 09/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,900 mm, total width: 2,100 mm, total height: 3,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer a well-maintained vehicle for sale. If you are interested in this vehicle, please contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly on our premises. VEHICLE IS LOCATED IN DRESDEN Ibjdpfxjzuh Rdo An Ioc VEHICLE IS LOCATED IN DRESDEN VEHICLE IS LOCATED IN DRESDEN The vehicle is located at our external storage facility; therefore, please contact us to arrange a viewing. Thank you! We expressly reserve the right to sell the vehicle prior to sale and for any errors in this offer. The vehicle description serves only to generally identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The information provided does not claim to be complete. The information/descriptions and images provided do not serve as guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The equipment may need to be checked separately.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Isdpszwvu Njfx An Isbc Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Iodpfx Aoyddzlen Isbc

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, cutting width (max.): 20 mm, type of input current: three-phase, total length: 750 mm, total width: 1,000 mm, total height: 1,150 mm, input frequency: 50 Hz, space requirement height: 1,150 mm, space requirement length: 750 mm, space requirement width: 1,000 mm, Bread slicing machine Wabäma Allround Economy Plus Maximum slicing capacity: 100 slices/min. Blades with high-quality Teflon special coating Machine is mobile Adjustable slicing thickness from 4 to 20 mm Robust technology Connection: 400V, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm (W x D x H) Used machine, cleaned + spare parts service Ibjdpfx Asryr Rhen Iec We offer the largest selection of bread slicing machines!

Condition: used, Year of construction: 2017, 4-balking / Ibedjtquhispfx An Ijc

Condition: used, mileage: 162,672 km, power: 213 kW (289.60 HP), first registration: 08/2021, fuel type: diesel, overall weight: 15,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2027, color: white, gearing type: automatic, emission class: euro6, total length: 9,300 mm, total width: 2,550 mm, total height: 3,650 mm, loading space length: 7,250 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly at our premises. VEHICLE IS LOCATED IN MUNICH! Vehicle data: * Model: MAN TGM 15.290 * First registration: 2021 * Engine power: 290 hp * Gross vehicle weight: 15,550 kg * Tail lift: Bär 1500 kg * Reversing camera Interior equipment: * Driver comfort seats * Automatic climate control * Radio / Bluetooth * On-board computer VEHICLE IS LOCATED IN MUNICH! Ibsdez H Emdopfx An Ijc The vehicle is located in our external warehouse; therefore, please contact us to arrange a viewing. Thank you very much! Subject to price changes, typographical errors and errors, as well as prior sale.

Condition: good (used), Layher Allround Stand with pin 1.00m uses ring 50 Saves assembly time through the ring system and dimensional stability of components. Sturdy and reliable: Made of high-quality steel for maximum stability. Iodpjw Ei Riefx An Ijbc Great versatility: Suitable for high scaffolding constructions and various applications. Durable design: Resistant to intensive use and heavy loads. Safety guaranteed: Meets the strictest safety requirements. The Allround system for all scaffolding applications!

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Ijdjrxtpdspfx An Isbc Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Ijdpsyddy Iefx An Ijbc

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational. Isdezkfh Sjpfx An Ijbc

Condition: used, Year of construction: 2023, Equipment: compressed air brake, Double harrow Lighting with track eradicator Telescopic drawbar CAT III / hydraulic track eradicator Cutter roller Coulter set HM goose foot coulter DSTS roller / hydr. system FW with roller Air brake / Iedpfx Aothhczen Ijbc

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as Isdpfx Asd Ih Hton Ijbc f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (Techn.According to the manufacturer - without guarantee!)

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Ibedorc Hibspfx An Iec

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Ibedpfx Ansyab R Nj Isc Robot WITTMANN W818-2558 (2013)

Condition: refurbished (used), Arburg, Thermonic heating controller, Arburg Allrounder Ibsdpfoyvp Upjx An Isc 4 units, as new condition. Stored as spare parts in maintenance. Price per unit: €99