Used Amf Deep Clamping Jaw/Low Clamping Jaw for sale (21,258)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so Codpfxsz Dmn Rj Ahmjhc

Condition: used, overall weight: 260 kg, Material: steel Diameter: 710 mm Spindle bore: 150 mm Codeyxgf Ropfx Ahmohc Spindle speed: 400 RPM Weight: 260 kg

Condition: excellent (used), functionality: fully functional, mileage: 791,562 km, power: 309 kW (420.12 HP), first registration: 05/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 1, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, full service history, lane keeping assist, navigation system, retarder, traction control, MAN TGX 18.420 / Leaf Spring/Air Suspension / Euro 6 / Low Liner Chedez Da Uwjpfx Ahmoc • Manufacturer: MAN • Type: TGX 18.420 • Mileage: 791,562 km • First Registration: 08/04/2017 • Power: 309 kW / 420 hp • Transmission: Automatic • Suspension: Leaf Spring/Air • Retarder • Low Liner • Automatic Climate Control • Navigation System • Differential Lock • Hill Start Assist • Cab is Air-Suspended • Long-Haul Cab • Heated Seats • Navigation • Cooler Box • Roof Hatch • Lane Keeping Assist • Cruise Control • Traction Control • Hill Start Assist • Distance Control • Lift Axle Control • ASR • TÜV (German Technical Inspection): 12/2026 • Euro Emission Standard: 6 • German Vehicle • German Documents • Immediately Ready for Use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Chjdjz Dw D Nopfx Ahmsc Visual appearance: good Please contact Arie or Pedro for more information Fruehauf / Hydraulic Ramps / 32 Ton

Condition: excellent (used), functionality: fully functional, mileage: 1,080,169 km, power: 294 kW (399.73 HP), first registration: 06/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 1, Year of construction: 2015, Equipment: ABS, central locking, cruise control, differential lock, navigation system, parking heater, MAN TGX 18.400 / Low Liner / Retarder / Euro 6 Cjdpoz Dw Afsfx Ahmohc • Manufacturer: MAN • Model: TGX 18.430 • Mileage: 1,080,169 km • First registration: 06/01/2015 • Power: 294 kW / 399 hp • Transmission: Automatic • Suspension: Air / Air • Low Liner • 6-stage Retarder • Air-suspended cab • Long-distance cab • Heated seats • Air conditioning • Navigation • Cooler box • Roof hatch • Lane keeping assistant • Cruise control • Traction control • Differential lock • Hill start assist • Distance control • Lift axle control • Euro: 6 • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), mileage: 263,000 km, power: 338 kW (459.55 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,530 mm, loading space height: 2,350 mm, Year of construction: 2020, Equipment: AdBlue, air conditioning, airbag, cruise control, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Cab - Radio/CD player - Sleeper cab = Notes = FM460 6x2 YV2XZY0C5LA859960 2020 263,000 km I-Shift transmission VEB (Air Suspension) Chsdpjzmfymsfx Ahmsc Fullair Wheelbase 490 Box dimensions: 735x253x235 Zepro lift, 2000 kg, with remote control = Further Information = Technical Information Number of cylinders: 6 Transmission Transmission: I-Shift, 12 gears, automatic Axle Configuration Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth inner left: 60%; Tire tread depth outer left: 60%; Tire tread depth inner right: 60%; Tire tread depth outer right: 60% Rear axle 2: Tire size: 315/70R22.5; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 12,430 kg Payload: 15,570 kg GVWR: 28,000 kg Functional Features Tail lift: Zepro, rear door, 2000 kg Body manufacturer: Volvo Condition Technical condition: good Optical condition: good Damage: none Warranty Warranty: FM460 6x2 YV2XZY0C5LA859960 2020 263,000 km I-Shift transmission VEB (Air Suspension) Fullair Wheelbase 490 Box dimensions: 735x253x235 Zepro lift, 2000 kg, with remote control Further Information Please contact VAEX The Truck Traders for more information.

Condition: excellent (used), Soft clamping jaws Manufacturer: Schunk Type: SFA 400 (28320) Length: 180 mm Width: 50 mm Chodpoivzb Refx Ahmjc Height: 73 mm Groove width: 18 mm Web width: 30 mm

Condition: excellent (used), Four-jaw lathe chuck (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Chuck height 110 mm Codpjtuvnyjfx Ahmjhc

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm Chsdpefimg Hjfx Ahmec with external thread 125 x 3 mm Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Manufacturer: Röhm Diameter: 315 mm Bolt circle: 120 mm Individually adjustable jaws Centering bore: 120 mm Pitch: 625/4 threads per inch Csdpfxjfklf Uo Ahmjhc

Condition: new, Material number 16 Cr Mn 5 Width of centering groove: 32 mm Length: 90 mm Width: 60 mm Chedpfx Asb Rmx Hjhmjc Height: 54 mm

Year of construction: 2011, condition: excellent (used), Lathe chuck Chedpfx Ahjd Na Spemec Diameter 330 mm Height 100 mm Weight 57 kg Year of manufacture is estimated.

Condition: excellent (used), Clamping plate made of cast iron Length 2000 mm Width 315 mm Chedpfed Tcz Ssx Ahmec Height 90 mm T-slot width 32 mm T-slot spacing 150 mm Diameter of the 12/8 fixing holes 27 mm Solid material

Year of construction: 2015, condition: excellent (used), Three-jaw chuck Manufacturer: Röhm Diameter: 200 mm With individually adjustable jaws Short taper size: 6 Taper diameter: 106.390 Bolt circle diameter: 133.4 Weight: 24.5 kg Codpfxed Th I Te Ahmohc Year of manufacture: estimated

Condition: as good as new (ex-display), Top jaw Manufacturer: SMW Autolok Type: 080 954 WAKS 500 10 16 Mn Cr.5 Weight per piece: 4.6 kg Codpfxsftz Ads Ahmshc

Condition: ready for operation (used), soft jaws Chsdpfjftzz Ssx Ahmec Manufacturer: SMW Autolok Type: 0137643 Weight: 9 kg per piece

Condition: excellent (used), Four-jaw spiral chuck Diameter 315 mm Chuck height, flange 125 mm Short taper bore, size 6 Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs, M 12 Chodpfx Aelguy Sehmec Accessories: 1 chuck key 1 set of hardened boring jaws 1 set of hardened turning jaws Weight 103 kg Shipping dimensions: W 800 x D 600 x H 550 mm

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Diameter 250 mm Through hole 68 mm Weight 20 kg Chodsvx Acyopfx Ahmjc

Condition: excellent (used), Marking plate-clamping plate-surface plate Length 1560 mm Width 560 mm Thickness 60 mm Weight 180 kg The plate is heavily tipped on the bottom. Codpewaxl Esfx Ahmohc Surface is finely planed. T-slot 16 mm

Condition: excellent (used), Lathe Chuck Chedswmk Huopfx Ahmec Three-Jaw Chuck Röhm 350 mm Diameter (28633) Bore Diameter 115 mm Centering Diameter 290 mm Height 100 mm 2 Sets of Jaws Weight 53 kg

Condition: used, Two Forkardt faceplates Diameter 200mm 2 BHE 200 Short taper diameter 106.4 mm = Size 6 Codpfx Ajcurfyjhmehc Bolt circle diameter 133 mm

Condition: used, Three-jaw chuck (223/5) Diameter 190 mm Chededdym Rjpfx Ahmec Height 130 mm

Condition: used, functionality: fully functional, machine/vehicle number: 90041833, Year of construction: 2001, operating hours: 278 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,600 mm, empty load weight: 923 kg, drive type: Elektro, Low-lift order picker Chassis number: 90041833 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: SBS Csdpfjzvz D Hex Ahmjhc Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: German: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Jungheinrich ESE 20 No.: R0815 Year of manufacture: 2001 Operating hours: 278 Lifting capacity: 2,000 kg Initial lift / base lift: 220 mm Fork length: 1,600 mm Own weight: 923 kg Battery: 24 V / 375 Ah, year 2022, manufactured by SBS, type 3 PzS 375 Battery condition: 80–100% Condition: ready for use and fully functional, visually and technically in very good condition. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: used, functionality: fully functional, machine/vehicle number: 91599290, Year of construction: 2016, operating hours: 5,600 h, load capacity: 3,000 kg, fuel type: electric, drive type: Elektro, Low-level order picker Chassis number: 91599290 Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2022 Description: Jungheinrich ECE 320 – Electric low-level order picker with 3.6 m fork length, year of manufacture: 2016 | Operating hours: 5,600 h | Load capacity: 3,000 kg. Powerful and robust order picker for demanding warehouse and logistics tasks. With its 3.6 m long forks, the Jungheinrich ECE 320 offers ideal conditions for handling multiple pallets. The unit is fully functional, immediately ready for use and in good technical and optical condition. Technical data: Type: Low-level order picker Manufacturer: Jungheinrich Cjdpfx Ahexy Tnlsmehc Model: ECE 320 // Electric // 3.6 m forks Year: 2016 Operating hours: 5,600 h Load capacity: 3,000 kg Fork length: 3,600 mm Battery: included, year of manufacture 2022 Charger: available on request Condition: technically good, visually good, ready for use Location: available, immediately Notes: Sold in its current used condition. All prices are net plus 19% VAT. Sale only to commercial buyers with a valid VAT ID. No warranty or guarantee. Jungheinrich ECE 320 – Electric Low-Level Order Picker with 3.6 m Forks. Year: 2016 | Operating hours: 5,600 h | Capacity: 3,000 kg. Robust electric order picker with extra-long forks for multi-pallet logistics. The Jungheinrich ECE 320 is fully operational, in good technical and visual condition, and ready for immediate use. Specifications: Manufacturer: Jungheinrich Model: ECE 320 // Electric // 3.6 m Forks Year: 2016 Operating hours: 5,600 h Capacity: 3,000 kg Fork length: 3,600 mm Battery: included (2022) Charger: available on request Condition: technically and visually good Location: available immediately Notes: Sale to business customers only (valid VAT ID required). All prices net plus VAT. Sold as used equipment without warranty or guarantee.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,000 h, load capacity: 1,000 kg, lifting height: 1,500 mm, fuel type: electric, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, Low-lift order picker ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for use and fully functional Chsdpfx Ahez Eddrjmec Technical condition: good Battery voltage: 24V