Used Arku Coil Line for sale (10,125)

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Fodpfx Adelwtzye Negb Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Fgjdpfx Aorn Sqhed Neb Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Fjdpfxsihf Tps Ad Njgb Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake Fgsdpfx Adeixqg Ne Njb AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Fedpoihf Twofx Ad Nsgb Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Fodpfx Aewu Agcjd Njgb Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Year of construction: 1980, sheet width 1000 mm plate thickness 125 mm Fgodpswz Rvxsfx Ad Nsb

Condition: used, Year of construction: 2000, Used Rondo line. We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) Fjdpox Swucjfx Ad Nsgb All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Manufacturer: Kemper Model: Multimatic Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Rondo ZGP665.C (year 2000), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. Fgedpsx R Ugmsfx Ad Neb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Fsdpfxjy Rflys Ad Negb Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Fgjdpfx Adowak Aie Nob Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: Fgjdpfxeyid Nws Ad Nob - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2017, For sale / on request: - Kaak Driem line 1 - Kaak Proofer + Euroclima - Kaak Driem line 2 - AMF / Den Boer oven (direct high-temperature fired oven) - Stelram conveyors - Cooling tunnel + ICS chiller - 2x ABB pick and place robots - 2x Fuji packaging machines Total working width: 1200 mm Year of construction: 2017 Fgjdpfxoy Rkrrs Ad Njb Documentation and software available. Inspection on location possible. For any questions or remarks, feel free to contact us.

Condition: used, Year of construction: 2008, functionality: limited functionality, Full evisceration line from MEYN. Maestro with 28 units. Fgedpfsy Nndpex Ad Njb All the rest 20 units. Can be sold with units revised with brand new parts as well as shaft.

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Fjdjy Rmfbspfx Ad Njgb

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data Manufacturer: ATS Wibbing GmbH Machine Type: Fully automatic KEG cleaning and filling line Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system Year of Manufacture: 2025 Availability: approx. 2-3 months Capacity: approx. 30 – 35 KEG/h Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm Control System: Siemens S7-1500 HMI: Touchpanel with operator guidance External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet Expansion vessel 150 l Pallet handling aid Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C Warranty: 2 years manufacturer warranty Fodpfoy Rk Igex Ad Njgb

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, power: 0.75 kW (1.02 HP), • 20-liter stainless steel bowl • For approx. 4 kg of flour • 3 tools • Digital control (stepless speed adjustment) • Machine body painted white • Dimensions: W = 480 D = 680 H = 1500 mm • 400 V, 3 phases, 0.75 kW • New machine • Including special equipment: bowl scraper All prices are exclusive of VAT, ex works Syke. Fjdpfey Rkxxex Ad Negb Available at short notice (shipping possible at buyer's expense). Advance payment required upon order. We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes Fedpfx Asy N Tx Sjd Nogb all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Fedpfxex S Evbo Ad Negb Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: used, empty load weight: 7,550 kg, maximum load weight: 28,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 96 m³, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, Equipment: ABS, Tara: 7550kg, Peso bruto admissível: 36000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.620 mm x 2.480 mm x 2.850 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 96 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Eixo elevador, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Caixa de ferramentas, Suporte para roda sobressalente, Chassis aparafusado, Odômetro, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Telhado de elevação, Fgsdpjy I Dtkjfx Ad Nob

Condition: new, mileage: 20 km, fuel type: diesel, gearing type: automatic, first registration: 05/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Driver’s air conditioning - Air conditioning system - USB connections - Webasto auxiliary heater = Further Information = Fjdpfxoy N Utwe Ad Nogb Height: 100 cm Damage: None = Company Information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large car park that serves as a display area. We always have a wide selection of buses from all brands, with various capacities, models, and price categories in stock. We can find the right coach, school, or city bus to suit your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing times for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, mileage: 20 km, fuel type: diesel, gearing type: automatic, first registration: 05/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Driver’s air conditioning - Air conditioning system - USB connections - Webasto auxiliary heater = Further Information = Height: 100 cm Damage: None = Company Information = Fgodpfx Aey N Ud Aed Njb We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large car park that serves as a display area. We always have a wide selection of buses from all brands, with various capacities, models, and price categories in stock. We can find the right coach, school, or city bus to suit your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing times for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, axle configuration: 3 axles, first registration: 11/2005, color: other, Year of construction: 2005, Empty weight: 5.110 kg Axle 1: left 6 mm right 6 mm Fsdpfx Adey Nzt Ds Negb Axle 2: left8 mm right 8 mm Axle 3: left 8 mm right 8 mm

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, overall weight: 36,000 kg, controller model: M-Plus, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Fgsdpoy N A Euofx Ad Nsb Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Lot of 65 boxes. Fgodpfxsw Hzu As Ad Neb Diameter: 18mm Thickness: 9mm Length: 23m