Used Asys Trm03 for sale (212)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts Crsdeixxwmopfx Adreh -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, machine/vehicle number: 007514, Position 1: Roller Conveyors IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Crsdpjwukznjfx Adrsh Position 3: Roller Conveyors IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Roller Conveyors IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 7: Roller Conveyors IMA-COMBIMA SYSTEM I Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Roller Conveyors IMA-COMBIMA SYSTEM I

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Codob A S N Ropfx Adrsrh Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container Credpfjd Dt R Ejx Adrjh -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,300 h, The machine is designed for prototyping and production in FDM technology, which involves applying successive layers of melted material according to previously calculated printing paths. A thermostated work chamber in which two heads work. Printer specifications: - FDM STRATASYS F270 - year of manufacture 2017 Cedjwmk Eqopfx Adrorh - software: GrabCAD Print - 3D printing technology: FDM - number of heads: 2 - building materials: ABS, PLA - support material: soluble QSR - dimensions of the workspace (length x width x height): 305 x 254 x 305 mm - camera in the workspace to observe the printing process - capacity of the material drawer: 4 spools (2 spools of building material + 2 spools of support material) - automatic change of the material spool - additional head for PLA - support material washer - printing trays - remote control via computer or smartphone

Condition: good (used), Line chokes, line filters, frequency converters, drive inverters, line filters, Smart Line Modules, Basic Line Filters Credpfxexm Sdfo Adroh -Manufacturer: Siemens, Line choke Line Filter Sinamics for 36kW -Type: 36KW SLM/ALM / 40 KW BLM -Voltage: 3AC 380-480V, 50-60Hz, 74A -Number: 4x Line Filter available -Price: per piece -Dimensions: 415/75/H225 mm -Weight: 7 kg/piece

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor Crjdpfjd Sp I Asx Adroh -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece -Quantity: 23 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Codpfx Aequ N U Dsdrerh Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container Csdpsb Uhk Uofx Adrjrh - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Condition: excellent (used), Basic element Make Tripan Crsdpfjmk Havjx Adreh (2841) 3 Type 311 Tripan steel holder basic element

Condition: ready for operation (used), Year of construction: 2017, total height: 711 mm, total width: 864 mm, travel distance X-axis: 355 mm, travel distance Y-axis: 254 mm, travel distance Z-axis: 355 mm, product length (max.): 1,626 mm, number of axes: 3, This 3-axis Stratasys F370 was manufactured in 2017. It features a maximum build size of 355 x 254 x 355 mm and supports various materials including PLA, ABS, and PC-ABS. The machine includes four material spool bays for efficient operation. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F370 plastic 3D printer we have for sale. Contact us for further details. Codpfxjzbhudo Adrorh - Maximum Build Size (XYZ): 355 x 254 x 355 mm (14 x 10 x 14 in.)- Model Materials: PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF07, FDM TPU 92A, PC-ABS, ABS-CF10, QSR Support material- Layer Thickness: Geometry/Material dependent (0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm)- Material Delivery Options: 4 material spool bays (2 for model, 2 for support) located in a drawer on the front of the unit- System Size: 1626 x 864 x 711 mm (64 x 34 x 28 in.)- System Weight: 227 kg (500 lbs) with consumables- Noise Specification: 46 dB maximum during build, 35 dB when idle- Accuracy: +/- 0.2 mm (.008 in) or +/- 0.002 mm/mm (.002 in/in), whichever is greater- Network Connectivity: Wired TCP/IP (100 Mbps minimum, RJ45), Wireless-ready (IEEE 802.11n, g, or b)- Software: GrabCAD Print, Insight software license- Security Feature: ProtectAM technology (U.S. DoD STIG compliance powered by Red Hat Enterprise Linux software)- Power Requirements: 100-132V/15A or 200-240V/7A, 50/60 Hz- Only the touchscreen function is defective. However, the device can still be operated using a connected mouse.

Condition: reconditioned (used), Year of construction: 2015, Boschert EASY SHARP tool grinding machine Equipped for Trumpf tool system (Amada system optional) Machine for maintaining stamping tools, with a cooling system and an extra-powerful motor, making it also suitable for use with diamond grinding wheels. Used machine, currently being refurbished Equipment for Trumpf tool system up to size III Accessories: Tool holder for flat punches and Whisper punches Die holders for sizes I, II, and III New corundum grinding wheel Truing diamond Cooling system overhauled and machine base frame Technical data: Grinding wheel diameter 175 mm Vertical adjustment 150 mm Csdjid I T Ispfx Adrerh Working area 400 x 150 mm Motor power 2.2 kW Motor speed 2825 rpm Adapter for Amada system also available as an option Images are similar

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Crodpfsy Ryhvex Adreh Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational.

Condition: new, components: 4 x clear glass panel L=418 B=568 S=6 2 x clear glass panel 3 x opal glass panel 1 x SEW Eurodrive SA47 AH90 1 x Continental STD 672 58M + belt gear 2 x CEDS Duradrive DAPE-0410.04400.00 1 x lamp unit 1 x computing unit 1 x Seiffert Systems Linatronic cooling unit incl. montage kit 4 x sawtooth belt 25 HTD 48M 2352 1 x 8 pole cable M12 plug + shielding 1 x system bus cirquit board 1 x valve control unit 8 x camera head Linatronic 2 x toothed belt HTD 1760 8M 30 Z=220 1 x protective glass for lamp unit 2 x protective glass panel 1 x frame seal 2 x frame seal 2 x frame seal 4 x Adjustable flow station 1 x Hirschmann RS20 Rail Switch 3 x Linatronic control computer Crjdpfshw E Rqsx Adrsh 1 x Siemens Simatic Net CP AS-Interface + replacement PCB 1 x Siemens Sitop modular 40A 1/2 pn 1 x ground lens 1 x White LED ring light 1 x cylinder valve unit 1 x replacement magnetic valve for cylinder valve unit 1 x small controller unit 1 x DC/DC converter 1 x DC/DC converter 1 x Input/Output module 1 x safety relais 1 x IFM elecronics distributor module AC2500 2 x relais 3sec 24v type b 1 x oil seal ring 1 x tensioner pulley 36 x pressure spring 1 x Futaba mini servo S3107 4 x ball bearing cx 16007-2RSLG622 3 x gas spring 2 x ring brush 2 x toothed belt HTD 10T 5x1380mm 2 x Festo CPV10-GE-ASI-4E4A-M8 1 x LED lamp contour RGB 1 x LED lamp wall 2 x roller guide 1 x ZAE gearbox 90-1094-14-1a i=14,5:1 Individual and partial purchases are also possible. We will be happy to send you further information on the components on request.

Condition: ready for operation (used), Year of construction: 2018, total height: 1,626 mm, total width: 864 mm, travel distance X-axis: 305 mm, travel distance Y-axis: 254 mm, travel distance Z-axis: 305 mm, product length (max.): 711 mm, number of axes: 3, This 3-axis Stratasys F270 was manufactured in 2018. It features a maximum build size of 305 x 254 x 305 mm and offers multiple material delivery options with four spool bays. The machine is designed for various model materials including PLA and ABS-M30. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F270 plastic 3D printer we have for sale. Contact us for further details. - Maximum Build Size (XYZ): 305 x 254 x 305 mm (12 x 10 x 12 in.)- System Size and Weight: 1,626 x 864 x 711 mm (64 x 34 x 28 in.), 227 kg (500 lbs) with consumables- Noise Specification: 46 dB maximum during build, 35 dB when idle- Accuracy: +/- 0.200 mm (.008 in), or +/- 0.002 mm/mm (.002 in/in)- Material Delivery Options: 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit- Model Materials: PLA, ABS-M30, ASA, FDM TPU 92A, ABS-CF10, QSR Support material- Layer Thickness Options: 0.127 mm (0.005 in.), 0.178 mm (0.007 in.), 0.254 mm (0.010 in.), 0.330 mm (0.013 in.)- Network Connectivity: Wired (TCP/IP protocols at 100 Mbps minimum, RJ45) and Wireless-ready (IEEE 802.11n, g, or b; WPA2-PSK, 802.1x EAP)- Software Compatibility: GrabCAD Print- System Requirements: Windows 7, 8, 8.1, or 10 (64-bit) with min 4GB RAM (8GB+ recommended)- Operating Environment: Temperature: 15–30 °C (59–86 °F), Humidity: 30–70% RH- Power Requirements: 100-240V~, 12-7A, 50/60 Hz- Regulatory Compliance: CE, FCC, EAC, cTUVus, KC, RoHS, WEEE, Reach, RCM- The F270 has a faulty circuit board, and the display's touch function no longer works. However, the touch function isn't absolutely necessary, since a mouse can also be connected to the USB port. Due to the faulty circuit board, it is not operational and cannot be turned on.- Insight Software License: Not included- DOD STIG Compliance (Red Hat Enterprise Linux): Not included Csdpszbhxvjfx Adrjrh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Serie number D00794, operating hours: 9,230 h, Stratasys F370 3D printer Cedpfxjy N Dhqe Adrerh

Condition: excellent (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 2.01 E -Class: 8502 -Price: per piece Credpfx Asd Spi Iedrjh -Quantity: 17 pieces -Dimensions: 88/49/H75 mm -Weight: 0.3 kg/piece

Condition: used, machine/vehicle number: 007840, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Crodpfeyg Eg Iex Adroh

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg Crjdsb Uhruepfx Adrjh

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.01 E -Class: 8502 -Price: per piece -Quantity: 17 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece Crjdped Spi Rjfx Adreh

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 8100404, Our showroom demonstration model is for sale. It comes without electrode holder and ground clamp. New cables are available upon request for an additional charge. Welding Power Easy-Stick 410 SET Adjustment range: 30 – 400 A Duty cycle at maximum current at 40°C: 60% Duty cycle at 100% duty cycle at 40°C: 310 A Fuse protection: 32 A Line voltage: 3 x 400 V Line voltage tolerance: -10 – +15% Line frequency: 50/60 Hz Open circuit voltage: 66 V Power consumption: 13 kVA Standard: EN 60974-10 Crjdpfsv T Tx Iox Adrjh Protection class: IP 21 Insulation class: H Marking: CE, S Operating temperature: -10 – +40 °C Weight: 24 kg Length x width x height: 618 x 330 x 441 mm

Condition: good (used), Hand wash basin with sink, wash basin Cjdpfx Adob Uhm Rerjrh -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 294 mm, travel distance Y-axis: 192 mm, travel distance Z-axis: 149 mm, number of axes: 3, This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², allowing for versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality smooth surfaces and supports over 640,000 color combinations. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys J55 Prime machine we have for sale. Contact us for further details. Codpfx Adsyub Hysrorh • Technology: PolyJet (multi-material 3D printing) • Build volume: Up to 22,000 cm2 (rotating build platform) • Max part size: Up to 1,174 cm2 • Layer thickness: 18 microns (0.0007 in) • Material capacity: 5 main material channels (ProJet technology) • Supported materials: VeroFamily (opaque colors); VeroClear / VeroUltraClear (transparent); Elastico (flexible); Digital ABS • Color capability: Over 640,000 combinations (PANTONE validated) • Accuracy: Typical deviation ±0.15 mm (±0.006 in) for rigid materials • Software: GrabCAD Print (compatible with SOLIDWORKS, CATIA, AutoCAD, etc.) Additional equipment • ProAero Air Extractor system (silent, odor-free operation)

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 Crsdeyly Aujpfx Adrsh With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures

Condition: new, Year of construction: 2025, Schnittbereich rund: 430 mm Schnittbereich quadratisch (B x H): 430 x 430 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 30 - 430 mm Bündelschnittbereich (Min.B x H - Max. B x H ): - mm Kürzeste Länge des abgeschnittenen Stücks : 25 mm Kürzeste Reststücklänge im automatischen Betrieb*: 170 mm Cedpfx Aswqca Ijdrsrh Kürzeste Reststücklänge im Einzelschnitt: 40 mm Length: 2500 mm Breite inkl. Späneförderer : 3900 mm Height: 2500 mm Weight of machine approx.: 6400 kg Electrical connected load: 17 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30 - 150 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 6100 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyLED work lightSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade