Used Automatic Circular Saw For Pipes for sale (27,890)

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Klodpfx Akoygta Aexot Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 10

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm Ksdovpt Eyjpfx Akxolt dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: good (used), functionality: fully functional, Crosscut Saw OMEC TA185 Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamping Kedpjy Sff Nsfx Akxolt Pneumatic saw feed Saw operated via two-button control Main motor power: 7.5 kW Machine dimensions: 492x145x120 cm (H) Weight: 600 kg

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Ksdjy N S Hzopfx Akxolt

Condition: good (used), Year of construction: 1994, machine/vehicle number: A 3883, Offer 24310 Technical Data: - Manual saw blade feed - Workpiece clamping in machine vice - Saw blade diameter: 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting capacity at 90°: round 110 mm - Rectangular 82 x 160 mm - Square 82 x 82 mm Klodpfx Akjy Nlthjxot - In mitre at 45°: round 110 mm - Rectangular 80 x 120 mm - Square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Required space approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm Kodpfx Akoy Nlnxjxolt - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Ksdpfxoy Nm Ume Akxolt

Condition: new, Year of construction: 2026, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Ksdpfxewdunwe Akxjlt Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Kjdpfx Aksyctwmoxolt Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: new, Year of construction: 2026, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Klsdsiz S Nyjpfx Akxjt Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Klsdpfx Aoiz S I Hskxet Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: good (used), Year of construction: 1984, functionality: fully functional, From business closure: Ulmia 1710R Year of manufacture: 1984 380 Volt Mitre cuts up to 45° Max. cutting height: 50 mm Sliding table travel: 200 mm Table size: 800x500 mm Supplied with the accessories shown. Ksdey Iutbepfx Akxslt

Condition: new, Year of construction: 2026, The CORMAK H400SA automatic bandsaw is a high-performance industrial machine designed for accurate and repeatable cutting of large steel parts, tubes and closed profiles. With its double-column structure and fully automated cutting cycle, it is ideally suited for production facilities, metal workshops and logistics centres dealing with large-scale material processing. Main Advantages Automatic operation – full cutting cycle without operator intervention: clamping, feeding, cutting and arm return. Hydraulic feed and vice system – ensuring fast, safe and precise cutting. Arm and vice position memory – shortens cycle times and increases efficiency in serial production. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Large cutting capacity – materials up to Ø400 mm or 400 × 400 mm. Construction and Technology The double-column CORMAK H400SA bandsaw is built on a robust welded steel frame with a cast-iron body, ensuring maximum rigidity and vibration damping. The saw arm is set at a 3° angle relative to the work table, which facilitates cutting of profiles and hollow sections. Precision and Productivity Hydraulically controlled arm feed with adjustable cutting pressure and precision throttle valve allows accurate adaptation to various materials. The hydraulic feeding system with electronic control enables programming of cutting length and quantity. The LCD display provides information about progress, errors, and material status. An automatic stop system halts operation in case of faults or programme completion, ensuring safe and efficient performance. Applications The CORMAK H400SA model is ideal for: Metalworking and steel construction industries Profile and section processing centres Serial production in workshops and industrial plants Logistics companies cutting materials to size Standard Equipment Automatic working cycle Arm and vice position memory Hydraulic unit and feed system Powered blade cleaning brush Kodpfx Ajyctr Rokxslt Coolant circulation system Bimetal bandsaw blade for metal CE Declaration of Conformity Technical and Operation Manual (DTR) TECHNICAL PARAMETERS Cutting range Ø400 mm or 400 × 400 mm Blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Feeder stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 1800 kg

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm - blade guard - height-adjustable arm - max cutting height: 120 mm - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW - extraction port diameter: 110 mm - roller width: 530 mm - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture Klsdsy Nx Urspfx Akxst – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Kledey Nm N Rjpfx Akxot Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm (Round) 45° 80 mm (Square) 90° 70 mm (Square) 45° 65 mm 220 V

Year of construction: 2004, condition: good (used), Underfloor saw Manual operation For saw blade up to Ø 300 mm Kedpfx Akey Nm Hijxelt Mitre cutting left - right up to 45° Manual spray unit for emulsion Robust steel housing and support table made of grey cast iron 400V Mobile on base frame

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Kodpey Ni Ayjfx Akxelt

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Kjdpfx Akey H Dbloxslt Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Bottene R 550 circular saw, manufactured in 2010. Model: R 550 Kedpfxey Tl Slj Akxolt Year of manufacture: 2010 Serial number: 1928 Voltage: 400 V Frequency: 50 Hz If you have any further questions or require more information, please send us a message or call.

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Crosscut length with scale at mitre fence: 2800 mm Kjdoxrhh Ropfx Akxolt Motor: 4 kW Speed: 4200 rpm Saw shaft: 30 mm Saw blade diameter min./max.: 300/315 mm Extension table: 540 mm Anodized design Tiltable up to 45° Digital tilt angle display Prepared for scoring unit Including mitre fence Including sliding carriage handle Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Kljdpfx Akov R Dxajxst

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Kodsgixvwjpfx Akxolt Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm Kljdpfx Akjy Ihaujxjt saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm Kjdoy Ihahopfx Akxjlt saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Klsdpfx Ajy Rku Hskxot Technical data: - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) - computer setting of cutting width - heavy-duty and stable construction, - high cutting precision, - excellent productivity, - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.