Used Automatic Punching And Bending Machine for sale (79,004)

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Hsdpettc Uasfx Anksr

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) Hodpexpqy Dofx Ankor - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Hodpfx Aoya Iaqjnkor Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Year of construction: 2017, Automatic cardboard strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex works: only €9,500.00 (net) ex works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Hsdpezpf H Eofx Anker Year of manufacture: 2017 Machine number: 112921 1L+N+PE, 50-60Hz, 100-240V, 3.00 - 1.25 A, max. 16 A Condition: good Available: from approximately the end of October 2026 Location: Erfurt area

Year of construction: 2024, condition: used, Dimensions (LxBxH): 500 x 55 x 155 cm Working width: 4.700 cm Force: 130 kN Stroke: 14 mm Operation: pneumatic Adjustable working width: 4,700 mm Overall dimensions LxWxH: 5,000x550x1,550 mm Equipped with: 4 Gema press jaws and various punches Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Hedszm H Ewopfx Ankor Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA158 Semi-Automatic Strapping Machine The CORMAK BA158 is a semi-automatic strapping machine designed for fast and repeatable securing of cartons, parcels, boxes, bundles, and multipacks using polypropylene (PP) strap. The device reduces the number of manual operations and improves the efficiency of preparing goods for shipment or storage. After the operator manually wraps the strap around the product, the machine automatically performs the remaining stages of the strapping cycle. The built-in tensioning mechanism tightens the strap, while the sealing unit performs thermal welding and cuts off the excess material. The process does not require additional metal or plastic seals. Benefits of Using the BA158 Strapping Machine Faster preparation of cartons, parcels, and bundled packages for transportation. Reduced manual workload thanks to automatic strap tensioning, welding, and cutting. No need for additional metal or plastic buckles. Consistent and uniform securing of packages. Adjustable strap tension according to the type of product being secured. Convenient strapping of products with different dimensions. Space-saving design thanks to its compact construction. Easy connection to a standard 230 V power supply. Applications The CORMAK BA158 semi-automatic PP strapping machine is suitable for securing: Shipping cartons. Courier parcels. Boxes and multipack packaging. Printed materials, catalogues, and paper products. Parts and components. Wooden and woodworking elements. Products sold through e-commerce platforms. Goods prepared for transportation or storage. The machine can be used in warehouses, production facilities, wholesalers, e-commerce companies, and packaging and dispatch departments. Electric strapping machines of this type improve repetitive packaging operations related to preparing products for transport and storage. Semi-Automatic Strapping Cycle After manually wrapping the strap around the product, the operator inserts the strap end into the machine mechanism. The device automatically performs: Strap tensioning. Thermal strap welding. Excess strap cutting. The maximum strap tension force is 400 N. The repeatable operating cycle helps maintain consistent packaging quality for consecutive products. Open Working Area Design The open construction without a closed frame makes it easier to place products of different shapes and sizes on the working surface. This solution is ideal for strapping various types of packages and bundles. Hedpfxozq Adqe Ankor The open design also makes it easier to rotate and reposition products when several straps need to be applied in different locations. PP Strap Compatibility – 5–15.5 mm Width The strapping machine supports polypropylene (PP) strap with widths from 5 to 15.5 mm. This range allows the user to select the appropriate strap according to the packaging type and process requirements. The machine is compatible with strap rolls featuring: Inner diameter: 200 mm Outer diameter: up to 450 mm Roll width: 200 mm Technical Specifications Parameter Value Model CORMAK BA158 Machine Type Semi-automatic strapping machine Strap Type PP Strap Width 5–15.5 mm Maximum Strap Tension 400 N Strap Joining Method Thermal welding Inner Roll Diameter 200 mm Outer Roll Diameter Up to 450 mm Roll Width 200 mm Working Table Height 765 mm Power Supply 230 V Motor Power 0.3 kW Dimensions 855 × 540 × 765 mm Machine Weight 50 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA200 Automatic Strapping Machine The CORMAK BA200 is an automatic arch strapping machine designed for securing cartons, parcels, and collective packages with polypropylene (PP) strapping tape. The automatic strapping cycle significantly speeds up packaging operations and ensures consistent, repeatable securing of products prepared for transport. Once the cycle is activated, the strap is automatically fed around the product through the arch, tensioned according to the preset value, heat-sealed, and cut. The strap joint is made underneath the package, leaving the upper surface of the carton or parcel clean, aesthetic, and easily accessible. Adjustable strap tension from 0 to 70 kg allows the operator to adapt the strapping force to the type and strength of the packaging. The BA200 automatic strapping machine is ideal for warehouses, manufacturing plants, wholesalers, logistics centres, e-commerce companies, and shipping departments. Automatic Strapping and Heat Sealing After positioning the product inside the arch, the operator starts the cycle using either the foot pedal controller or the control panel button. The PP strap is automatically guided around the package and tensioned according to the selected setting. The strap ends are joined underneath the package using a thermal welding process. After sealing, the machine automatically cuts the strap and prepares it for the next cycle. The process does not require any additional metal or plastic buckles. Adjustable Strap Tension The 0–70 kg tension adjustment range allows the operator to select the optimal strapping force for different types of products. Lower tension settings are suitable for lightweight or delicate cartons, while higher tension provides stronger securing of heavier packages and bundled goods. Proper tension adjustment reduces the risk of package deformation and improves the repeatability and reliability of the strapping process. Integrated Product Handling Rollers Rollers integrated into the worktable make it easier to move and position cartons, parcels, and other products prepared for strapping. They also simplify repositioning when multiple straps are required. Mobile Design Transport rollers allow the electric strapping machine to be easily moved between workstations, providing greater flexibility when organizing the packaging area. The unit can operate as a standalone strapping station or be installed alongside an existing packaging line. Automatic electric strapping machines significantly improve repetitive packaging operations related to preparing products for storage and transportation. Included Equipment CORMAK BA200 automatic arch strapping machine Foot pedal controller for activating the strapping cycle Operating manual Technical Specifications Specification Value Hjdpfxjzqz R Ne Ankor Model CORMAK BA200 Machine Type Automatic arch strapping machine Strap Type PP (polypropylene) Strap Width 9–15 mm Strap Tension 0–70 kg Strap Joining Method Thermal welding Strap Joint Location Underneath the package Worktable Height 750 mm Table Load Capacity 80 kg Worktable Equipment Integrated rollers for product movement Mobility Transport rollers Motor Power 500 W Machine Dimensions 1400 × 628 × 1435 mm Weight 150 kg Inner Reel Diameter 200–210 mm Outer Reel Diameter 400–450 mm Reel Width 170–190 mm

Condition: good (used), Year of construction: 2001, Electrical Connection: 380/400 V, 50 Hz Working Height: 970 mm Width: 2650 mm Depth: 1200 mm Height: 1750 mm Hjdpfezpa Rlsx Ankor Weight: approx. 800 kg Condition: good, second-hand

Condition: not inspected (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 4619, Gubisch UFA reversing transfer unit with 4 shafts, 1st shaft: direct drive 2nd shaft: counter-rotating 3rd shaft: counter-rotating 4th shaft: counter-rotating Working height 115 mm, Spindle speed 6,000 rpm, Hodpjznkyuofx Anker Spindle diameter 1 x 30 mm and 3 x 40 mm, Maximum circle diameter D = 220 mm, Minimum circle diameter 100 mm, Total power consumption 19 kW, 380 V, 50 Hz, Weight approximately 1,850 kg, in "as is" condition, as inspected, available from the Seevetal warehouse, excluding transport, subject to prior sale. Delivery possible from approximately the end of August 2026.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left Hjdpfx Ajznhwdenkjr y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Hsdpfx Aoznir Aenkjr Laser on time: 72,745 hours Includes Sheetmaster.

Condition: ready for operation (used), Two small punching machines for crimping binding spines are available. 1) Swigraph E420C punching and wire closing machine, max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm. 2) Two-piece Ibico EP28/HB28 plastic comb binding system, punching width: 420mm, max. punching capacity: approx. 35/min, max. binding capacity: 500 sheets, machine dimensions X/Y/Z: approx. 550mm/450mm/600mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible. Hodpjznx Itjfx Ankjr

Condition: ready for operation (used), Year of construction: 1993, 6 Stutznäcker single-needle lockstitch sewing automats are offered. Outside frame size X/Y: 1900mm/2600mm, max. stitch rate: 2600stitches/min, sewing type: lockstitch, sewing head/gantry: Mammut Class 750, linear unit X-axis: Hauser HLE 150 (installation position right), Y-axis traverse: ball screws/linear guide rails, control system: Hauser Comtac 2000. Equipment: Electronically synchronized separate drive for needle and hook, pneumatic presser foot lift, upper thread monitor, frame coding for safety monitoring, coated table plates as frame supports within the travel area, various frames, spare hooks, electrical cabinet on the right, operator panel on the right-hand side table and left-hand side table with pneumatically lowerable table top (max. 200mm) and surrounding support for the frame. Four sewing automats were retrofitted in 2007, two sewing automats in 2006. Dimensions X/Y: approx. 5000mm/7000mm, weight: approx. 2000kg. The machines are available from April 2027. Inspection possible by appointment. Hsdsznx I Topfx Anker

Condition: ready for operation (used), A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Hedpfx Aney Tn Nysksr

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display Hjdpfx Aoznu Sbenkor -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. Hjdpozbqk Uefx Anksr • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine -CE marking -Year of manufacture: 2009 Hodpfxjznm Nfj Anker -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Hjdpfeznu T Eex Anksr Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Spray device. Chip extraction system.

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. Hedpfxsznu H Sj Anksr The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Hjdpfeq Atyzjx Anker Including the two roller conveyors shown.

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Hodpfxey Szlxj Ankjr Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. Hjdpfx Aey Syivjnker It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: used, Year of construction: 2005, functionality: fully functional, HOLZ-HER 6110 CUT 70 Panel Saw A HOLZ-HER 6110 CUT 70 panel saw is for sale, designed for precise cutting of chipboard, MDF, and other panel materials. The machine is located in Labin (Istria, Croatia). Price: 25,000.00 EUR Service and Condition The machine is regularly serviced. Hedpfx Anezp U Rajksr A new computer and a new label printer were installed a few months ago. It is ready for immediate use. The CUT 70 model is designed for fast and precise cutting of panel materials and enables reliable and efficient production in carpentry workshops and industry. If you are interested in purchasing the entire production facility, please contact us. We will be happy to discuss a serious offer. The following are also available in the facility: HOLZ-HER Eco Master 7120 CNC machining center HOLZ-HER Sprint 1321-2 STUF edge bander Lazzari UNO 3000i circular saw Polymac curved edge bander Polymac ABS edge trimming machine Busellato jointer Table router for making grooves Overhead router Contact: Damir Verbanac 📞 +385 91 22 55 349 Also available via WhatsApp or Viber.

Condition: new, Year of construction: 2026, CORMAK O-900 Semi-Automatic Stretch Wrapping Machine The CORMAK O-900 is a semi-automatic stretch wrapping machine designed for fast and consistent wrapping of parcels, cartons, shipping boxes, and other products. It streamlines the preparation of goods for transportation and storage by reducing manual handling and significantly speeding up the packaging process. The machine can wrap products with maximum dimensions of 900 × 900 × 900 mm, making it suitable for warehouses, manufacturing facilities, wholesale distribution centers, and packing and shipping departments. With a turntable speed of 30 rpm, the machine enables efficient wrapping of consecutive products while ensuring consistent packaging quality. Adjustable leveling feet allow for easy installation, stable positioning, and adaptation to different workstations. Key Features and Benefits 30 rpm rotating turntable – ensures fast and efficient wrapping of multiple products. Foot pedal control – allows convenient cycle activation after securing the film to the product. Maximum table load capacity: 80 kg – suitable for heavier cartons, parcels, and industrial products. Supports products up to 900 × 900 × 900 mm – accommodates a wide range of package sizes. Compatible with stretch film widths from 100 to 900 mm – allows selection of the appropriate film width for different products. Accepts film rolls up to 300 mm in diameter – compatible with the specified packaging material. Adjustable leveling feet – ensure stable positioning and easy machine leveling. 230 V power supply – operates from a standard single-phase electrical outlet. Fast and Consistent Package Wrapping After placing the product on the turntable and attaching the leading edge of the stretch film to the parcel, carton, or other item, the operator starts the wrapping cycle using the foot pedal. The rotating table spins the product, allowing the stretch film to wrap evenly around it without requiring the operator to walk around the package manually. The CORMAK O-900 uses a motor-driven turntable rotating at 30 rpm, providing fast and repeatable wrapping performance. The 80 kg maximum load capacity allows the machine to wrap both standard cartons and heavier industrial products, provided they are securely positioned on the turntable. The machine is capable of wrapping products with maximum dimensions of 900 × 900 × 900 mm. It is compatible with stretch film widths ranging from 100 to 900 mm. Narrower film is ideal for smaller products, while wider film covers a larger surface area with each rotation, improving packaging efficiency. The wrapper accepts film rolls with a maximum diameter of 300 mm. Technical Specifications Specification Value Model CORMAK O-900 Machine Type Semi-automatic parcel and carton stretch wrapper Packaging Material Stretch film Hodpfxszp E Tfj Anksr Wrapping Cycle Start Foot pedal Power Supply 230 V Motor Power 0.12 kW Turntable Speed 30 rpm Maximum Turntable Load 80 kg Compatible Film Width 100–900 mm Maximum Film Roll Diameter 300 mm Maximum Product Dimensions 900 × 900 × 900 mm Compressed Air Required Yes Machine Dimensions (L × W × H) 1150 × 628 × 1884 mm Important Information The machine requires connection to an air compressor for proper operation. The stretch film shown in the product images is for demonstration purposes only and is not included with the machine. The actual product color may differ slightly from the images shown.

Condition: new, Year of construction: 2026, actuation type: electric, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter 30 mm Hodpfxszmc T Ds Ankor - Can be operated in both clockwise and counterclockwise directions - Suitable for horizontal and vertical applications - Foot pedal control - Emergency stop switch - Documentation - 400V