Used Bobst 1260 for sale (251)

Condition: used, Year of construction: 2015, functionality: fully functional, Cutting mill from DHB Maschinenbau in combination with an air extraction system and sound enclosure Motor power: 15 kW Year of manufacture: 2012 Rotor width: 600 mm Rotor diameter: 260 mm Number of rotor knives: 6 pcs in 3 rows Number of stator knives: 4 pcs in 2 rows Feed opening: 600 x 280 mm Rotor speed: 580 rpm Features: soundproof enclosure (optional: matching fan and cyclone, as well as complete extraction solutions available) Weight: 1250 kg Screen: 10 mm Dimensions: H: 1925 mm, Depth: 950 mm, Width: 1260 mm Hedsyxw Iispfx Ab Nsfg

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface Hfsdpfx Absuxfu Ne Njg finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling Hsdpfxed Ih Stj Ab Nefg New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Year of construction: 2024, condition: new, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan A1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The Wattsan A1 6090 has a working area of 600x900x200mm. Its basic design includes a T-slot table and a 2.2 kW spindle. Two-phase stepper motors are responsible for accurate motions. You can give our managers a call for additional details! Hedpeih Sb Njfx Ab Nsfg Wattsan A1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1260 x 1500 x 1662 mm Weight: 340 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 1985, MAN Roland R 802/5 ref 2973 Year – 1985 2 colours Impressions – 70 million Max sheet size – 890 x 1260 mm Feeder MABEG Hfodpfeyzalvox Ab Nog Rolandmatic

Condition: new, functionality: fully functional, machine/vehicle number: HR14851, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,480 mm, power: 55 kW (74.78 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 7,480 kg, total length: 4,780 mm, drive type: Diesel, construction width: 2,270 mm, Telescopic forklift rigid Hfjdpfxjyv Syns Ab Neg Chassis number: HR14851 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Gearbox: Torque converter Condition: New device Technical condition: New Front tires size: APOLLO FX525 40080R24 162A8 Front tires condition: New Rear tires size: APOLLO FX525 40080R24 162A8 Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours Rear work lights, front work lights, STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, seat, Additional handle in the cabin Height-adjustable steering column Car radio pre-installed Tilt lock License plate light at the rear Road lighting Pack Comfort Side window wiper with washer Reversible fan Wheel chocks Speed 20 km/h TÜV preparation Additional hydraulic function FORK CARRIER PFB 35N 1260 FORK TINES 125X 45X1200 FEM 3A

Year of construction: 2012, condition: ready for operation (used), overall weight: 1,960 kg, total height: 4,430 mm, Hocker Polytechnick MultiStar JP5 was manufactured in 2012. This used dust extraction system features a powerful 30 kW motor and a filter area of 121.3 m². It includes a Briketierpresse BrikStar c-3 18, designed for efficient operation. If you are looking to get high-quality dust extraction capabilities, consider the Hocker Polytechnick MultiStar JP5 machine we have for sale. Contact us for further details. • Condition: Unrefurbished – no warranty • Technical data: • Volume: 20,000 m³ • Motor: 30 kW • System: Vacuum • Filter area: 121.3 m² • Filter bags: 100 pcs • Hose length: 2300 mm • Hose diameter: 170 mm (pressure applied) • Compressed air connection: 6.0 bar, 1" • Operating pressure: 4.5 bar • Compressed air consumption: approx. 216 Nl per hose row at 200 ms pulse duration • Noise level (jet discharge): approx. 75 dB(A), depending on local conditions • Footprint (L x W): 2540 x 2420 mm • Space requirement (L x W): 3500 x 3380 mm • Connection, bottom (internal): 2300 x 2300 mm Additional equipment • Briquetting press BrikStar c-3 18 • Channels/ducting and covers (galvanized sheet steel, 2 mm, bolted): • Channel 908, asymmetrical; dimensions 1: 900 x 800 mm; dimensions 2: 900 x 650 mm; 1 pc • Channel, 750 mm long, 900 x 800 mm; 2 pcs (ref. 460406) • Blind cover, 2 mm, 900 x 800 mm; 1 pc Hfodpfxjyv Ewae Ab Njg • Piece for MS XP on BrikStar; 1 pc • Unit 300 x 2300 mm on existing briquetting press; Manufacturer: Gross (approx. 1100 x 1100 mm; press height: 1260 mm)Note: The technical data and descriptions are copies of the original order confirmation. This information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Hodpoyxd Nmjfx Ab Nsfg Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) Hedpfx Aewwg Uvob Nofg If you have further questions, we will be happy to answer them by phone.

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm Hfjdpovuukujfx Ab Nog capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher Hedpjyt Rrvjfx Ab Nofg • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Hfedpfxetyyvwj Ab Nog Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. Hfjdpfx Abev Nzpgj Nsg From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Hfsdex Ndu Depfx Ab Neg Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Hsdpfx Absx H Au Re Nsfg Accumulator English, French, Czech language available. Hours: 61000

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires Hfsdpev Hm A Tjfx Ab Njg - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: used, Double-head cutting-off machine – Tekna TK 154 Technical specifications: Blade: Ø 500 mm Maximum cutting length: 4000 mm Blade tilt: outward Tilt angle: 90°/22.5 kW Voltage: 380 V Hodoxbr Itjpfx Ab Njfg Power: 7 HP Dimensions: 5200 x 1650 x H 1700 mm (max 2100 mm) Weight: 1260 kg

Condition: refurbished (used), power: 19 kW (25.83 HP), rotational speed (min.): 1,100 rpm, rotational speed (max.): 15,000 rpm, Manufacturer: Weiss Spindeltechnologie GmbH Hfsdpeyrz N Ajfx Ab Nsg Manufacturer group: Siemens Company Type: Motor spindle Spindle type: 175047 A Tool interface: HSK-A63 Motor designation: MW20/26-4 DBL 191299 Power P: 19 kW Rated speed: 1100 min⁻¹ Maximum speed: 15000 min⁻¹ Speed ranges: 1260 / 1710 / 4200 / 15000 min⁻¹ Frequency: 42 / 57 / 140 / 500 Hz Voltage: 137 / 175 / 400 / 400 V Current: 116 / 86 / 48 / 36 A Standard: EN 60034 Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Overall length L: 1026 mm Spare part number: 90210001388 Item number: 211167

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 3,000 rpm, total height: 1,997 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm. Machine Benefits Technical Machine Benefits • Max swing over bed: 750 mm • Swing over carriage: 480 mm • Max turning diameter: 500 mm • Max turning lenght: 1260 mm • Sub spindle: 4000 rpm • C axis indexing: 0. 001º • X, z and b axis • Turret with 12 live tool position Hfedsyi Elcopfx Ab Njg • Mt5 tailstock Dimensions Machine Depth 2002 mm

Condition: new, Ostas 3 rolls round bending machine SMR-S 1570 x 170 Technical specifications: Hfodjiw D Smepfx Ab Nog Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1570 mm smallest diameter 255 mm roll diameter 170 mm weight 1960 kg dimension L-W-H 3200 x 920 x 1260 mm motor 5,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-roll round bending machine SMR-S 2070 x 190 Technical specifications: Special equipment included in the price: motorized lower roll adjustment Hsdsg Nz T Ispfx Ab Nefg hardened rolls motorized back roll adjustment digital display sheet width 2070 mm sheet thickness 7,0 mm max. sheet thickness 6,0 mm bending roll length 2070 mm smallest diameter 285 mm roll diameter 190 mm weight 3480 kg dimension L-W-H 3750 x 920 x 1260 mm motor 4 KW equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operating panel safety line, CE-sign

Condition: new, Bernardo swivel bending machine with segmented top -, bottom - and beam TB 1020 Flex Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width with segments 48 mm Maximum opening width without segments 150 mm Maximum clearance height 125 mm closed Bending angle 0-135 ° Backgauge 600 mm Working height 900 mm Width 1400 mm Depth * 1070 mm Hedsd Hxm Iepfx Ab Nsfg Height 1260 mm Weight 430 kg * with Backgauge Properties Piano inserts in the top, bottom and beam results in a large number of bending possibilities Tapes and special sections with opposite bends are easily achievable with these models Universal bending machines for sheet metal working and repairers Simple swivel movement of the beam by means of handle Slight adjustment of the upper beam for efficient working High upper beam for the manufacture of highly bent profiles Large-sized flat Guide for precise work A cylinder of help helps the edges off the bending process Scope of delivery Segmented top - sub and bending flange Backgauge Corner segment left / right side 75 mm | 25. 30. 35. 40. 45. 50. 75. 100. 200. 270 mm

Condition: new, Bernardo Bench Drill DMT 25 Technical Specifications - Drilling capacity max.: 25 mm - Tapping capacity max.: M20 - Morse taper: MT 3 - Spindle speed (5 steps): 340 – 2180 rpm - Throat depth: 240 mm - Max. distance spindle/table: 355 mm - Distance spindle/baseplate: 670 mm - Quill travel: 135 mm - Column diameter: 85 mm - Table size / T-slot size: 252 x 252 mm / 14 mm - Working area baseplate: 365 x 305 mm - Motor output (S1 100%): 1.1 kW / 400 V - Motor input (S6 40%): 1.5 kW / 400 V - Machine dimensions (W x D x H): 500 x 820 x 1260 mm - Weight: approx. 184 kg Features • Safety guard according to CE standard, adjustable for each drill length • Machined worktable, height adjustable via rack-and-pinion with hand wheel • Ground baseplate with T-slots for securing large workpieces • Adjustable drilling depth stop for precise quill positioning • Guaranteed spindle run-out accuracy ≤ 0.02 mm measured in the quill • Powerful drive motor, suitable for continuous operation • Robust, high-performance drill presses for heavy-duty use • Includes automatic reversing for tapping operations Hfjdsyamz Hspfx Ab Njg Scope of Delivery • Key-type drill chuck 5 – 20 mm / B 22 • Drill chuck arbor MT 3 / B 22 • Reducing sleeve MT 3 / MT 2 • Tapping device • LED machine lamp • Height-adjustable safety guard

Condition: new, Bernardo motor plate shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Maximum sheet thickness * 3 mm Cutting angles 1° 30' Strokes / min 31 Working height 810 mm Back gauge 0-750 mm Table width 390 mm Motor 4,0 kW Width 2600 mm 2100 mm deep Hsdsd Hxnhspfx Ab Nsfg Height 1260 mm Weight CA. 1710 kg Material I a tensile strength 400 N / mm² Properties Fitted with metal high restraint, optimal for thin sheet metal Support arms on the front panel for easy editing of large panels Motorized Backgauge, precise method of Ballscrews Clearly structured control panel with integrated controller Robust steel sheeting construction for vibration-free operation Support table with erected fence on both sides High operator safety protection coverage and photo cells at the back of the machine 2-edged blade made of quality steel guarantee a clean and grafreies cutting Automatic hold-down device for the fixation of the plate Scope of delivery Cutting line illumination Motor NC Backgauge Front trays Side attacks Fender with photo cells NC BRL 401.2 Pneumatic sheet high retaining device Foot pedal with emergency stop Blades made of tool steel

Condition: used, Year of construction: 2014, workpiece weight 300 kg Hfedpoyrtw Eofx Ab Neg workpiece length 1260 mm diameter 99999 mm Like new CAB820