Used Bosch 0810091237 for sale (1,048)

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 Ljdpfxsnh R Eke Agtohk The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: ready for operation (used), Bosch SD-B6.480.020-00.000 servo motor 104-913411, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ljdpfxeuz Iv Us Agtohk

Year of construction: 2024, condition: new, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. DA-69T features: • 3D and 2D graphical touchscreen programming • 3D representation in simulation and production • 17-inch TFT color display with high resolution • Complete Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB, peripheral interface Ljdsd Sak Sjpfx Agtjhk • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will benefit, as will future generations! • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings through start-stop technology • Faster than hydraulic press brake • Lower operating costs • Significantly lower service and spare parts costs (the electric press brake is technically much simpler and requires almost no maintenance) • No harmful oil • Quiet – efficient – independent of hydraulic oil – low-noise operation • Relaxed and stress-free bending • Complete working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Free stand clearance: 1,300 mm Press force: 400 kN (40 tons) Control: CNC ModEva 19T Controlled axes, back gauge: X, R (Z, optional) Stroke: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Stand overhang: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s Travel range R-axis: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard equipment: Control system: Cybelec ModEva 19T CNC-controlled crowning Top clamping system: Durma (European) Bottom clamping system: 60mm - holder Back gauge: AC servo motors with ball screw Options include: Fiesseler safety system AKAS II M FPSC-B-C Control: Delem DA 69T CNC-controlled back gauge X, R, Z1, Z2 Hydraulic top tool clamping Durma (Type Wila) Hydraulic bottom tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Manufacturer: DURMA Model: AD-R 30220 Bending length: 3050 mm Press force: 2200 kN Control system: CNC DT-10 Operating hours: 0 h Controlled axes, back gauge: X, R Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range, X-axis: 650 mm Travel speed, X-axis: 250 mm/s Approach speed: 140 mm/s Bending speed: 10 mm/s Retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Standard equipment Y1, Y2, X = 650 mm Control system: CNC DT-15 European tool clamping system 60 mm die holders (for European die system only) 2 front-adjustable support arms with linear guide along the entire length Motorized back gauge with linear guide and ball screw Height-adjustable back gauge finger Servo motor for back gauge Side safety guards CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C safety cover and switch Controlled axes X, R-axis, Z-axes adjustable manually Quick clamping Lhedpod Srk Ejfx Agtjk CNC-controlled motorized crowning The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Further machines are available for demonstration in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Lhsdpfxjfin Hwo Agtok Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bend allowance: 5 mm Bending capacity: 6 mm Bend allowance: 5 mm Bending length: 2,030 mm Roller diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Lhsdpfx Asftdh Iegtsk Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Lhodpfxed S I R Te Agtok Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Here, we offer a customized tandem press brake. Everything can be configured according to your requirements, with very short production and delivery times. Ledpfx Ajd Tpy Nogtshk Upon request, we will be happy to provide you with further information. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in research and production of machines for sheet metal processing, annually producing 8,000 machines in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned producers in its industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact locally and to offer you services relating to training and customer support. We would now like to support you from Germany – from consulting and purchasing to the entire service life of your machine. With our German branch, we are always on site to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad Lhedpfx Ajtv H Ucsgtek table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: ready for operation (used), Bosch PSU 5100.111W / 1070079215 frequency converter SN: 002809034 - U AC 400 - 480V / 110A, used, good condition, 100% functional, scope of delivery as per photos Ledpfx Aerlx Dzogtjhk

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length X ton) 3050mm x 175t Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Lodpfx Ajttatbegtshk Selected options -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: ready for operation (used), Bosch SD-A4.140.020-01.000 Brushless servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhedpfx Agsi D E R Hjtek ATTENTION: Please request separate pricing for packaging and shipping!

Condition: ready for operation (used), Bosch SD-B4.140.030-05.010, brushless, permanent magnet synchronous servomotor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhodpfxsi D E Uij Agtek

Condition: ready for operation (used), Bosch SD-B5.380.012-04.000, brushless, permanent magnet synchronous servomotor, SN: 547, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Lhedpfxsi D Hbpe Agtek

Condition: ready for operation (used), Bosch SD-B6.720.020-01.000 Brushless servomotor, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Lodoi D Hb Tepfx Agtehk PLEASE NOTE: Please request the costs for packaging and shipping separately!

Condition: ready for operation (used), Bosch transformer + protective cover. Serial number as shown in the photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Lhedpfsi D T R Hsx Agtek

Condition: new, Bosch M601 central unit, part number 1070064837-105, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Lhedei D T U Uepfx Agtjk

Condition: ready for operation (used), Bosch SM 20 / 30 - SM 20/30 GTC Pulse Inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpfx Asi D Uc Rsgtohk

Condition: ready for operation (used), Bosch SM 20/30 LN servo module 310606, used, only briefly used for testing purposes, 100% functional, scope of delivery as shown in the photos. Lhodpfxji D Udgo Agtok

Condition: ready for operation (used), Bosch SPM 17 spindle module, serial number 298871, professionally and completely refurbished and tested, 100% functional. Scope of delivery as shown in the photos. Lhedpfx Agei D Ufzetok

Condition: used, Year of construction: 1990, Bosch CNC control CC200 spare parts Lhsdpfsvk D R Njx Agtek Monitors, cards, controllers etc.

Condition: used, Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Hydraulic pump comes: from an injection molding machine -Manufacturer: Battenfeld -double pump -Manufacturer: Flutec Lsdodwqp Depfx Agtohk -Pump type: PT-350/2.3/N -Drive ABB motor type: MBT160L -Power: 15 kW 1455 rpm -with: clutch bell -with: Bosch hydraulic valves -Dimensions: 1070/630/H500 mm -Weight: 232 kg

Year of construction: 2024, operating hours: 32 h, condition: new, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Press force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range, X-axis: 650 mm Travel speed, X-axis: 500 mm/s Travel range, R-axis: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1, Y2, X, R – X = 650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC-controlled motorized crowning European tool clamping system 60 mm die holder (for European die system only) Overhang 410 mm 2 front-adjustable support arms with T-slot and tilting stop Back gauge system: Siemens DC servo motor with linear guide and ball screw spindle Protective covers CE marking Additional equipment Safety system, CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Controlled axes, back gauge: X, R, Z1, Z2, +Delta X +/- 125 mm, CNC-controlled Control system: DELEM DA-66T Hydraulic upper tool clamping system Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping system Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Power pack for hydraulic clamping AP3-AP4 bending aid - motorized height adjustment - max. load capacity 125 kg per piece Oil cooler This machine is manufactured according to customer requirements. Lsdpfx Agedx Nluetehk Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Lsdpegy Da Sefx Agtehk -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm Lhjdpsy Rxy Dofx Agtok MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation