Used Branson Emerson Heating Element Welding Machine For Plastic for sale (81,366)

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Credeiknv Eepfx Adroh

Condition: used, Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible. Crodpozxr N Sefx Adrsh

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module Csdpfx Ashpf Iyodrorh - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: good (used), Altinisik Makina 1020 Flexographic Printer Crjdpfxezz Hh Ie Adroh The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: used, An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement. Credezuzzpjpfx Adroh

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Codpfoqu Ubujx Adrjrh

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Crsdswq Hp Topfx Adrjh Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Crsdpfjw Rm Saox Adrjh Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, input voltage: 400 V, total height: 1,700 mm, total width: 1,300 mm, total length: 1,000 mm, welding power (max.): 45 kVA, overall weight: 850 kg, Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 1000*1350*1700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Crjdszz R I Espfx Adroh Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch Cedpsvuz N Rjfx Adrjrh

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power Codpfx Aoug Unfsdrorh 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. Cedpfxstkuvxj Adrorh unused still in original packaging.

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled Credsqvp Nkopfx Adreh -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: Crodoi Ab Unepfx Adreh - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg - Transport case

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Arm length: 300 mm Power: 200 kVA The machine is out of service, and its condition is unknown. Crodpozp H Ukjfx Adreh

Condition: excellent (used), pneumatically operated, water-cooled toggle-lever spot welding machine Manufacturer: DALEX, Type: SL 202 Cjdpfozw U T Dox Adrjrh Rated power at 50% duty cycle: 20 kVA Secondary short-circuit current: 15 kA Electrode force: 420 daN Reach: 130 - 500 Arm distance: 250 mm Single-acting cylinder - 50 mm stroke with main switch according to VDE 0113 with synchronous welding control RS 17 PICTURES TO FOLLOW

Condition: good (used), Year of construction: 1999, machine/vehicle number: 99 C 70090, Offer 19013 Crsdpfxev Du Dae Adrsh Technical data: - Nominal power at 50% duty cycle 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Welding values for sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm distance 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water quantity approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Suspension bracket with gimbal ring

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Csdpexuvnqefx Adrerh

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 12kA Electrode force: 120daN / single stroke Throat depth: 150mm --- Weld control: AR.01 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact" - forearm support --- Warranty: 12 months --- Crodpjw Natbjfx Adreh Spotwelding electrodes + spare parts at stock

Condition: excellent (used), Year of construction: 2019, 1 used CNC stud welding machine Manufacturer: HBS Credpfxozq R Uws Adroh HBS Type: CPW0604/1K/1MZ Year of manufacture: 2019 Working area: 600 x 420 x 120 mm / 23.6" x 16.5" x 4.7" T-slot work table: 800 x 490 mm / 31.5" x 19.3" Welding range: M3 - M8, Ø 3 - 8 mm (Ø 10/12/12.7 mm only possible with modification) #4 - 5/16", Ø #4 - 5/16" (Ø 3/8" - 1/2" only possible with modification) Stud length: 8 - 40 mm / 0.31" - 1.57" (other lengths available upon request) Welding performance: Up to 30 studs/min. (depending on configuration) Feed rate: 25 m/min. (X-Y), 20 m/min. (Z) / 82'/min. X-Y, 65.6'/min. Z Stud feed: Automatic stud feed (up to 3 different stud lengths per welding head) Positioning accuracy of the welded stud: ± 0.2 mm / ± 0.008" Positioning and repeatability accuracy: ± 0.05 mm / ± 0.002" Welding head: KAH 412 KAH 412 LA (mechanical length compensation - gap) Max. number of stud welding heads: 1 Connection values: Electrical: 400 V*, 16 A, 50 Hz; Pneumatic: min. 6 bar / max. 10 bar / internal hose diameter 6 mm Motorized Z-axis: Z = 0 - 120 mm / 0 - 4.7" (freely programmable via servo drive) Control: High-performance PLC according to IEC 61131-3 Display: 9-inch touchscreen Keyboard: Touch Dimensions (L x W x H): 1600 x 950 x 1900 mm / 63" x 37.4" x 74.8" Weight: Approx. 640 kg / 1410.96 lbs

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Crodszz Sdzjpfx Adrsh Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Codozcf T Tspfx Adrerh Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Cedpfeh N Sd Uox Adrjrh Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: good (used), Year of construction: 1994, Arburg Thermonic Temperature controller (model SI FF 10 G250/300) Codpfx Aozl Sbnsdrsrh The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Crjdpfx Ajzw Et Ijdreh Series : B20 .