Used Bruderer Bsta 500-110B for sale (16,103)

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Tjdpfx Anox Uq Uhetjb

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Tjdpfsq Ewi Ajx Antob

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 1045-650-500 RA1367 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Tsdpek Aa T Aofx Antjb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Todpfx Ansk Aa U Djteb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Tsdpfx Ask Abawjnteb Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1997, Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Technical data: Tsdek Abnropfx Anteb Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg If you need other dimensions or individual, professional advice, please contact us. Simply contact us by phone or mail or use our filters on our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Tedpfjh Nrh Uex Antob Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Storage platform, 12,000 x 5,000 mm, load-bearing capacity 500 kg/m² Dimensions/Technical Data: Dimensions of steel structure: 12,000 x 5,000 mm Dimensions of floor area: 12,000 x 5,000 mm Floor area: approx. 60 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Clearance height underside: top surface minus 338 mm Net load-bearing capacity: 500 kg/m² evenly distributed load Included in the scope of delivery: 8 uprights, single-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross beams S+300 x 2 mm, L = 4,800 mm (closed) 26 mounting brackets 3 diagonal bracing 24 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top surface natural including fastening material including load signs Uprights available in the following standard colors: RAL 7035 light gray RAL 7016 anthracite gray RAL 3000 fire red RAL 5003 sapphire blue (other colors on request) Main and cross beams galvanized We also manufacture storage platforms to any other desired dimension. Prices on request. Accessories such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Tsdpfx Anod Htr Roteb Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Shelf testing Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg Tsdpfx Anog Tm N Aotjb - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Tjdpfeg Uk Eijx Antob Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Speed continuously adjustable from 0.01 to approximately 2.0 RPM Height (horizontal) 800 mm, width 800 mm, length 1550 mm Todpfx Aehadtuentsb Diameter of the clamping disc 800 mm

Condition: new, Brush cleaning machine Tjdpfx Ansph Sr Sjtsb Fabr. Cosma Type PL 500 CU1 Special version only for Ceetec expeller brushes Cleaning machines especially for Ceetec brushes used for painting and coating of solid wood workpieces A careful and min. daily cleaning of the dispelling brushes extends the life span and ensures a constant application quality. for brushes up to length 500 mm Mounting: 2x 500 mm Cleaning medium: water Stainless steel body Pneumatically operated, shaft speed adjustable Functionality: The brushes will be mounted on a shaft. This shaft is inserted into the machine. The shaft is driven pneumatically and the brushes are rotated in the water bath and moved against a scraper. At the end of the cleaning process, the water is drained off via a valve and the brushes can be removed cleaned.

Condition: new, Technical data for the shelf rack upright: Shelving system: SSI Schäfer Type: R 3000 Tedpfx Ajpbwahontjb Included in delivery: 01x shelf rack upright, new goods Material color: sendzimir galvanized profile dim.: approx. 60 x 30 mm Incl. bulkhead and base plates The uprights are unassembled 2.490 mm high 500 mm deep Remark: The shelving uprights are supplied unassembled when ordered unassembled when ordered. For an extra charge of 7,50 € / piece plus VAT we can also preassemble the also pre-assemble the uprights. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, mileage: 274,630 km, power: 225 kW (305.91 HP), first registration: 06/2005, fuel type: gasoline, color: black, gearing type: automatic, number of seats: 2, Equipment: air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Special equipment: Audio navigation system: Autopilot system APS COMAND, electrically folding exterior mirrors, Bi-Xenon headlights, CD changer, fire extinguisher, velour floor mats, luggage retention strap(s), designo Alcantara headliner, comfort front seats (including ventilation, seat heating), multi-contour seat / multi-contour backrest front left, Parktronic System PTS (front and rear), gear selector lever grip wood/leather, heated windshield washer system, integrated garage door opener transmitter, exclusive leather upholstery, BOSE sound system, Linguatronic voice control system, TV tuner, roof rack system pre-installation, pre-installation for mobile phone, auxiliary heater (stationary heater) with remote control Todewzggtjpfx Antob Further equipment: Driver/passenger airbag, active suspension/damping system (Active Body Control / Magic Body Control), electrically adjustable and heated exterior mirrors on both sides, outside temperature display, indicator integrated in exterior mirrors, tachometer, automatic driving light activation, interior trim: burr walnut wood, body: 2-door, climate control (Thermotronic), electrically adjustable steering column (steering wheel), alloy wheels, metallic paint, engine 5.0 L - 225 kW V8 24V CAT, tire pressure warning system, trip computer, front side airbags (sidebags), sun visors with illuminated mirrors, wind deflector (net), heat-insulating glazing / front: band filter / rear: ESG.

Condition: new, Year of construction: 2019, functionality: fully functional, power: 1,250 kW (1,699.52 HP), input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens AC Motor Type: 1LA4500-6CM00-Z Design: IM1001-B3 Tsdpfx Anoxal Drotob Standard: IEC60034-1 Insulation Class: F Protection Class: IP55 Duty Type: S1 Input Voltage: 690 V Input Current: 2 x 640 A Power (Pn): 1250 kW RPM: 995 Power Factor: 0.85 Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Tsdpow T Sn Esfx Anteb Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: new, Year of construction: 2026, Included in delivery: 01x End Bracket Extension, new Material color: electro-galvanized Design: universal Total height: approx. 657 mm Usable height: approx. 500 mm Telescopic depth adjustment: 600 – 1,150 mm Frame profile: L-profile 45 x 45 mm Material thickness: approx. 5.00 mm Square tube: 25 x 25 x 1.50 mm (outer) Square tube: 20 x 20 x 1.50 mm (inner) Tsdpfjvbbtiox Antsb Adjustment grid: 25 mm Hole pattern: 5 x 25 mm Weight per piece: approx. 6.87 kg Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, this will incur additional costs, which can be quoted separately depending on location and scope of delivery.

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Equipment: foot remote control, jlkajljödslf Tjdpfovnz I Tjx Antsb

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display Tsdpfeu Iucuex Anteb S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: used, mileage: 770,000 km, power: 375 kW (509.86 HP), first registration: 06/2016, fuel type: diesel, overall weight: 26,000 kg, emission class: euro6, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Volvo FH 500 Registration: Mileage: I-Shift Roof-mounted light bar 6x2 German vehicle, first owner ACC (Adaptive Cruise Control), Distance Warning, Lane Keeping Assist Body: Schwarzmüller Crane: Atlas 145.2 Crane year of manufacture: 2016 Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 EUR Our services for you: - Customs registration plates Tsdpfxsx U N Awj Antjb - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: excellent (used), mileage: 583,294 km, power: 368 kW (500.34 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, traction control, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum Fuel Tank - Heated Mirrors - Brake Booster - Differential Lock - Remote Central Locking - Speed Limiter - Intarder - Radio/Cassette Player - Sunroof - Sleeper Cab - Sun Visor - Auxiliary Heater - Tool Box = Notes = MAN TGX 18.500 tractor unit for sale. Tjdpfx Aoyt Rlisntob Well-maintained MAN TGX from 2018. A robust and reliable tractor unit with a powerful 12.4-liter diesel engine producing 375 kW. Suitable for heavy transport and long international routes. Comfortable cabin with two seats and good driving comfort for long trips. This MAN TGX is known for its good fuel efficiency and strong performance. Ideal for transport companies or owner-operators looking for a dependable truck. Main specifications • Make, MAN • Model, TGX 18.500 • Year, 2018 • First registration, 30-12-2018 • Fuel, diesel • Engine capacity, 12,419 cc • Power, 375 kW • Wheelbase, 3600 mm • Length, 5833 mm • Width, 2550 mm • Height, 3935 mm • Seats, 2 Registration number Robust tractor unit ready for work. For more information or if interested, send a message. = Additional Information = Front axle: Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle: Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Optical condition: good Price: Upon request

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Tsdpfey Ehntjx Anteb

Condition: used, Year of construction: 1998, Technical details: Todpfx Aoy Er Tgonteb x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: new, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be Tedpoy Suu Tsfx Antsb purchased for an additional charge.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm CNC type: Haas Table length: 600 mm Table width: 355 mm Tsdoxq D Ecspfx Antsb Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Weight: 3190 kg