Used Bruks Wood Chipper With Screen for sale (10,891)

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components. Dedpoy N Rlvofx Akmeku

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Made in Germany. Technical specifications: 1 head Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included. Dksdpszlgfnsfx Akmeu

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dkodpfx Aoz Agxvjkmou After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, wood chippers ERJO 604 MA 450 opening size 550 x 450 mm 90 KW engine fully functional Dedpfxjz Abz Ss Akmeku

Condition: good (used), Perfecta SL-10 P Paper Stack Lift with Sidewall The device is in perfect technical and visual condition. Virtually unused. Equipped with an adjustable sidewall for easy stacking. Designer look. Lifting capacity: 1000 kg Plate size: 900 x 1300 mm Dsdpfjzz Hfgex Akmsku Power supply: 380 V Weight: 650 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Lifting is operated by a photocell. Quiet hydraulic unit.

Condition: used, Year of construction: 2018, operating hours: 1,871 h, 2018 | Wacker Neuson EZ36 with 3 excavator buckets | Used Mini Excavator < 7t | 1871 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 60 inspection points 59 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good working and preservation condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39890 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Dkjdpfoy D Tz Ajx Akmsu 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2019, For sale is a pad printing machine from the manufacturer ESC Europa-Siebdruckmaschinen-Centrum GmbH Co.KG of the type KE13 1CE/130. The machine also has the following accessories: various pad printing stamps (approx. 30 pieces), printing pots of various diameters (5 pieces), plastic cliché (of acceptance parts) and steel cliché blank (4 pieces). (from acceptance parts) and steel cliché blank (4 pieces) Dkedpfx Aorzqrlekmou The machine is in excellent condition and can be inspected on site.

Condition: excellent (used), first registration: 05/1997, color: black, Year of construction: 1997, VF95333EC00166393 = More information = Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Dodpfxoymrfwj Akmsku Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Dkjdezhap Eepfx Akmsu Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh sizes of 65 and 5 [mm]. Side tensioning, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a chassis. Upon request, we can manufacture a custom chassis with the included chutes. Dkedpez Dkxyefx Akmsu

Condition: used, axle configuration: 3 axles, first registration: 07/2008, total length: 13,500 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 9,010 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Dsdpfsz Dkm Djx Akmsku Axle configuration Tire size: 245/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread depth left inner: 10%; Tire tread depth left outer: 10%; Tire tread depth right inner: 10%; Tire tread depth right outer: 10% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Twin tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Weights Unladen weight: 13,220 kg Payload: 31,780 kg GVW: 45,000 kg Functional Loading platform height: 90 cm Condition Damage: None Identification License plate: OK-70-LB

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. Dkedozzxzmjpfx Akmou We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. Dkjdpoz Dtcbofx Akmsu 380V power supply + compressed air.

Condition: used, functionality: fully functional, power: 82 kW (111.49 HP), fuel type: diesel, overall weight: 22,000 kg, Year of construction: 1999, operating hours: 5,727 h, drive type: Kette, machine/vehicle number: 5963, Seat dimensions: 2,700 x 3,100 mm (W x L) Dedpfx Akez Dtxpemsku Engine: Deutz / 82 kW Transport dimensions: 8,520 x 2,700 x 3,320 mm (L x W x H)

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 96.1 kW (130.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,224 kg, input voltage: 400 V, total width: 1,260 mm, total length: 3,300 mm, total height: 2,120 mm, warranty duration: 12 months, AIRCOOLED CHILLER MTA TAEEVO TECH 402 96.1 KW Cooling capacity: 96.1 kW / 27.32 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3, expansion vessel. Dimensions: 3.3x1.26x2.12 m Weight: 1224 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Dkjdpfx Akjz Dt Udsmju - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), mileage: 565,234 km, power: 397 kW (539.77 HP), first registration: 07/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, central locking, cruise control, electric window regulation, fog lights, onboard computer, parking heater, soot filter, spoiler, = Additional Options and Accessories = - Windshield - Closed cab - Refrigerator - Air suspension - Particle filter Dkjdpfx Aezxp Irekmou - Sleeper cab - Sun visor - Auxiliary heater - Power Take-Off (PTO) = Notes = Volvo FH13.540 6x2*4 - Platform with side doors - PTO/Hydraulic - 4.30 WB - Model Year: 9-7-2019 Mileage: 565234 YV2RT60C4KA848476 Box: 6.2 - 2.45 4.30 wheelbase Steering axle rear Full air suspension PTO and hydraulic system Platform with doors Refrigerator Etc. = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steerable; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 295/80R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 12,375 kg Payload: 15,625 kg GVWR: 28,000 kg Condition Technical condition: good Optical condition: good

Condition: new, The new Heinola SM chipper canter is now available for sale. It features two 160 kW motors and two chipper heads, each equipped with five straight chipper knives. The total weight of the unit is approximately 14,000 kg. Dksdpfxjwfr Nus Akmsu

Condition: used, Year of construction: 2016, operating hours: 12,019 h, 2016 | Liebherr A 918 Litronic with Tiltrotator | Used Wheeled Excavator | 12019 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 50 approved ✅ 3 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: fully functional and good maintenance despite high mileage 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41270 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Djdoz E Hn Tepfx Akmsku

Condition: good (used), Slow-speed machine with walking floor Rotor width: 1 m Motor: 22 kW Dedpfx Ajyu U Spskmsku

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Dodpfx Ajyrnxkekmoku Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm Dsdpfx Aksztziwjmoku max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: pulling roller ratchets 1 metal toothed pulling shaft 2 metal sequential pulling shafts 1 metal toothed pulling shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth metal pulling shaft upper pressure roller at the outlet with 2 pulling rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth metal pulling shafts – from the rear: 2 side spindles 1) vertical right 150mm 4kW 2) vertical left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged in alternating pattern electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min diameter of the dust extraction socket 2x120mm, 150mm dimensions (length/width/height) 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing both wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Year of construction: 2021, Great opportunity to buy an outstanding universal turning center (milling and turning) including automation with the Robo2Go: a flexible workpiece loading and unloading system with a six-axis-industrial-robot. The CLX 450 TC was built in 2021 and first used for actual production in 2022. About 9300 operating hours and only 3800 spindle hours. The Robo2Go was built in 2018, but is actually 'like new', because it was barely used. CNC control Celos X with SIEMENS Sinumerik One Max. turning diameter 400 mm Turning length 1100 mm Bar capacity max. 65 mm Dkedoz Eg H Aspfx Akmsu X-axis travel 276 mm Z1-axis travel 755 mm Z3-axis travel 775 mm Y-axis travel +/- 100 mm B-axis travel +/- 120° Tool holder HSK-T 63 Tool changer 60 positions Additional 1,000L coolant tank with programmable pressure 80-bar through-spindle cooling 60-tool tool changer Safety fence around robot Please check the full technical specifications and options in the attached documents. Optional: Large set of HSK-63 toolholders (without the inserted tools) The machine can be viewed in operation upon appointment. More pictures and videos available on request.

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 398.9 kW (542.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, input voltage: 400 V, total width: 2,260 mm, total length: 3,910 mm, total height: 2,560 mm, warranty duration: 6 months, AIRCOOLED CHILLER CLIMAVENETA NX2-G06 K 0424 398.9 KW Cooling capacity: 398.9 kW / 113.42 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Dksdpfxoz Duahe Akmeu Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Bitzer GSD80485VLB4-2 (scroll) + 2 pcs. Bitzer GSD80385VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355 E3, expansion vessel, buffer tank 700 l. Dimensions: 3.91x2.26x2.56 m Weight: 3800 kg Working hours: 2260/2260/2259/2259 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), TETRA THERM ASEPTIC FLEX 10 UHT ASEPTIC MILK PROCESSING YOM 2004 INCLUDING: - TETRA THERM ASEPTIC FLEX 10 PLATE STERILIZER, MODEL TA FLEX 10 PHE PLC ALLEN BRADLEY -TETRA ALEX 30 HOMOGENIZER, 2-STEPS, NON-ASEPTIC CAPACITY 8 TONS PER HOUR EXCELLENT CONDITION Djdpfxsz Dpuys Akmjku LOCATION - POLAND

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 29,000 kg, emission class: euro3, Year of construction: 2016, operating hours: 5,660 h, Screen type: Triple-deck classification screen Dimensions upper deck: 1,520 x 4,270 mm (W x L) Dimensions middle deck: 1,520 x 4,270 mm (W x L) Dimensions lower deck: 1,520 x 3,660 mm (W x L) Feeding capacity up to approx.: 350 t/h Feed size: 150 mm Engine: Cat Power: 75 kW Dkedpfx Ajyznb Eokmou Transport dimensions: 15,610 x 3,100 x 3,450 mm (L x W x H) Weight: 29,000 kg Hopper volume: 8 m³ Drive: Dual Power diesel and electric drive Operating hours electric drive: 10 h