Used C.e.johansson Granite Plate for sale (12,253)

Condition: new, plate width 4000 mm plate depth 1000 mm plate height 300 mm weight 3500 kg dimensions of the machine ca. 4000 x 1000 x 300 mm Dedpfx Adeyk Ikwsrjcn GERD WOLFF clamping plate 4000 x 1000 x 300 mm If you cannot find the size you are looking for, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 X 28 T-slot spacing: 300 Number of slots: 3 Edge distance: 200 Weight: 3500 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate width 2000 mm plate depth 4000 mm plate height 150 mm Dsdpjyk Ik Rjfx Adrocn weight 3900 kg Clamping plates - T-slot plates - plate field 4000 x 2000 x 150 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can a custom made panel for you. Number of grooves: 7 edge distance: 240mm groove spacing: 230mm Groove size: 22mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III The cover picture is for orientation only and does not represent a true-to- scale image of the plate.

Condition: new, plate depth 5000 mm plate width 1500 mm plate height 300 mm weight of the machine ca. 6060 kg required space 5000 x 1500 x 300 mm GERD WOLFF clamping plate 5000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 Dcedpfx Adoyk Ilujrsn T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 6060 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Year of construction: 2026, condition: new, NEW – Dcjdpfx Adjd Tyaaeren - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Year of construction: 1985, condition: good (used), 17 rolls, Ø 12 mm Dodpobif Edofx Adrjcn plate width: 120 mm plate thickness: 0,1 - 2 mm

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Number of drill holes: 02 pcs. Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Dcjdet N T A Uspfx Adren Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, each with 32 stations with divider plate Djdpfxozxrkvj Adrscn suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 75 mm Dodezxrlaspfx Adrscn suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30)

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm weight 3,8 t Djdpfezxt Trjx Adrecn

Condition: new, three-jaw chuck diameter: 630 mm, STOCKLIST NEW BISON CHUCKS Chucks in Original wooden Boxes ===== 1 x 4344-630-8 1 x 4344-315-11 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (JAWS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 1 x 3544-400-8 1 x 3245-400-8 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 1 x 3234-200-5 Please always check if still available! Dodpfxjqpg Hye Adrscn Delivery: EXW – NL

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : Dcjdpfxszx Ug Te Adrjn - dimensions 1 full block per station -> 1.070 mm x 530 mm - dimensions 2 blocks per station -> 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.000 x 1.700 x 1.300 mm 26 blocks weighing ± 26 kg or 52 blocks weighing ± 13 kg ± 1.380 kg / Cycle (2h30)

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Dcodpfx Ajzxxgwsdrjn Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Quantity: 1 piece (a second plate is still available ID 21153) -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Sheet thickness: 35 mm Dsdpfxsd Ehflo Adrjcn -Plate height: 315 mm -Plate with: supporting ribs -Groove width: 51 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm Djdpoxytlqefx Adrecn – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter Dcsdpfx Asznngxedrsn * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, The plates are cleaned befor delivered. (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. Dcsdod Ezfmspfx Adrsn You are welcome to ask us for your requirements.

Condition: used, Used Chamber Filter Plates PP Dedpfsbppvyex Adrscn 1000 x 1000

Condition: used, Used Membrane Chamber Filter Plates 1000 x 1000 PP approx. 190 on stock Dcjdpebppv Dsfx Adrsn

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW Dcsdjxaa I Sepfx Adrsn weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Djdpfx Aexaag Uedrocn * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam Dcodpjxabd Uefx Adren - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) Djdpfexaa Rgox Adrjcn * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm Dcsdpfx Adjxabikorjn ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale Dcodpfx Aexabllodrsn - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: new, sheet width 4100 mm Dcjdpfx Asxabwujdren plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design