Used Carl Schenk Balancing Machine for sale (73,180)

Condition: excellent (used), Year of construction: 2003, Degen FS 2550 Surface Grinding Machine Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. CE compliant!! The machine comes from the Richard-Hartmann School (vocational school) in Chemnitz. Technical data: Year of manufacture: 2003 Clamping area / table size: 500 x 250 mm Max. grinding area: 500 x 250 mm Max. travel (X / Z): 600 x 280 mm Max. distance between spindle nose and table: 490 – 500 mm Max. workpiece weight: 320 kg Dimensions of magnetic clamping plate: 500 x 250 x 80 mm Grinding spindle & feed Lasdpfxjz Rla Hs Ahajh Grinding wheel dimensions: 355 x 25 x 127 mm (standard) Spindle speed: 1,500 rpm (at 50 Hz) / 1,800 rpm Spindle motor: 2.2 kW (3 HP) Longitudinal feed (X-axis, hydraulic): continuously variable 1 – 25 m/min Transverse feed (Z-axis, automated): 0.1 – 10 mm/ About the machine: Offered is a Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. This universal surface grinding machine is in very good original condition. It comes from a vocational school where it was used only sparingly for training purposes. It has a very easy-to-use control system. A grinding travel of 500 mm in the longitudinal axis and a transverse travel of 250 mm make it suitable for toolmaking, fixture construction, and small-series production. Its extensive standard equipment and ease of operation are characteristic of this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Degen has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Degen on-site while it is powered up. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2009, Geibel & Hotz FS 840 SD Surface grinding machine Geibel & Hotz FS 840 SD with B&R control, manufactured in 2009, in SUPER condition. CE compliant!! This machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture 2009 Max. grinding area (mm) 800 x 400 x 375 Travel in X (mm) 800 Travel in Y (mm) 400 Travel in Z (mm) 375 Clamping surface, magnetic (mm) 800 x 400 Grinding wheel (mm) 300 x 50 x 76.2 Power of grinding spindle motor (kW) 3.7 Grinding spindle speed (rpm) 1400 Manufacturer Geibel & Hotz Year of manufacture 2008 Control system B&R RPS Type of control system Cycle-controlled Total power consumption (kW) 12 kW Space requirement (mm) 3600 x 2750 x 2470 Weight (kg) Ledjz Rmufspfx Ahaoah 2700 About the machine: We offer a Geibel & Hotz FS 840 SD surface grinding machine with B&R control. This universal surface grinding machine is in very good, original condition. It comes from a company where it was only used to a small extent for training purposes. It has a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 400 mm make it suitable for toolmaking, jig and fixture construction, and small-batch production. The rich standard equipment and the simple operation of the machine are characteristic of this series. The stable design of the spindle head and the guide system with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the control elements simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Geibel & Hotz FS 840 SD has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Geibel & Hotz FS 840 SD on site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: ready for operation (used), grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 400 mm, distance between centers: 2,500 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 25 rpm, workpiece spindle speed (max.): 360 rpm, Newall Cylindrical Grinder 400 x 2500mm Model: LA 96 Capacity: 400 x 2500mm Wheel Size: 75 x 750mm Work Head Speeds: 25-360 RPM Machine With: Lsdpfsz S Nmysx Ahaoah 2 Steadies Swivel Table Coolant System

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: Lajdpfx Aez S T Injhaeh 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, !! This machine comes with a donor machine that can be used for spare parts. !! The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: Ljdpfx Aey N Ahcehasah The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to the gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Laedpfxsz Tiwhe Ahajh Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: used, total width: 1,200 mm, total height: 2,270 mm, total length: 1,800 mm, Year of manufacture: 2005 Colour: White Empty weight: 1.000 kg Price: On request - Year: 2005 - CE marking present: Yes - Serial number: 077511 - Number of units [pcs]: 2 - └ Unit 1: - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 450 - - Roller diameter [mm]: 80 - - Roller material: Steel - - Motor power [kW]: 7.5 - └ Unit 2: - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 450 - - Roller diameter [mm]: 120 - - Roller material: Rubber - - Motor power [kW]: 7.5 Lasdpfx Aoz Tqxyshajh - Max. sanding width [mm]: 450 - Max. sanding height [mm]: 186 - Feed table length [mm]: 400 - Feed speed: Manual - Feed speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 17.5 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 1800mm x 1200mm x 2270mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP E100M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, total height: 3,280 mm, total length: 6,495 mm, total width: 3,460 mm, table width: 630 mm, table length: 630 mm, overall weight: 26,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, We are pleased to offer this very well-maintained Okuma MA-600HB horizontal machining centre. The machine was manufactured in 2004 and is fitted with the OSP E100M control system. Technical specifications: Pallet table size: 630 x 630 mm Number of pallets: 2 Table load: 1200 kg Movement X-axis: 1000 mm Lodsz Tq Tkjpfx Ahasah Movement Y-axis : 950 mm Movement Z-axis : 1000 mm Table indexing: 360 x1 ° Spindle Taper: MAS BT50 Spindle speed: 12.000 1/min Spindle motor: 37/26 kW Magazin capacity: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Table Size: 2000 x 460mm ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Lsdpfx Ahsz S Nkroasah Spindle Speeds: 30 – 2066 RPM Spindle Taper: 50 INT Machine with: Digital Readout

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. Lodpfjzvmy Hox Ahaeah 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request Lasdpfxexuf Sls Ahaoh - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, functionality: fully functional, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l Laodpfx Ajg Akgtehaoh coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 710 mm, controller manufacturer: Fanuc, controller model: 160iS-MB, total height: 2,771 mm, total length: 5,855 mm, total width: 2,555 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 820 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 12,000 rpm, spindle nose: Mas BBT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC Horizontal Machining Center OKK HP 500S Lasdpo Aawapofx Ahajh Technical details: CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Z-axis travel: 710 mm Indexing of table 0,001° Spindle holder MAS BBT 40 Spindle speed 100 - 12.000 rpm Spindle motor 11/7,5 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. We sell this machine at a special price called “as seen”. This means that we do not check the condition of the machine.

Condition: used, total length: 2,100 mm, total width: 1,000 mm, total height: 2,450 mm, Colour: White Empty weight: 4.600 kg Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Lajds Aatr Ujpfx Ahaoh Machine-weight: 4600kg - Documentation available: Yes - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Notching width [mm]: 200 - Shearing width [mm]: 500 - Max. plate thickness shearing [mm]: 2.5 - Options: Length stop - Transport dimensions: 2100mm x 1000mm x 2450mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm Lasdpfx Aho Ab Uzasajh • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: excellent (used), Year of construction: 2013, Vertical machining center, Haas VM-3, year 2013. Ljdpj Adptcofx Ahaeah

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units – Behringer HBE 321 A dynamic new machines, available for immediate delivery from stock. Ljdpfxo Adpvqj Ahaeah Attention: You can receive up to 15% in funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (item no. 33) Active cutting monitoring (item no. 22) BEHRINGER screw-type chip conveyor (item no. 105) Automatic bar-end detection (item no. 535) Lighting (item no. 941)

Condition: used, Schunk Type: SAR-1300 B Material Separator Technical Data: External Dimensions: Width: 1325 mm Width of operator console: 565 mm Depth: 1300 mm Shuttle overhang: 730 mm Height: 1870 mm Light column overhang (top): 350 mm Operator height: 900 mm Speed: Ljdpjzd Sq Tefx Ahaoah X, Y: Linear motor axes 2000 mm/s Z: Linear motor axes 1000 mm/s Weight: approx. 1500 kg Accuracy: Repeatability: 0.02 mm Positional accuracy: 0.02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working Area: Max. separation area X, Y: 430 mm x 350 mm Max. material size X, Y: 430 mm x 350 mm Material thickness: 0.5 - 3.2 mm Power Supply: 400 V / 50 Hz / 16 A Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2002, A medium duty tenoner suitable for many joinery and furniture companies. Fitted with Cut Off saw 250mm Top and Bottom Tenon head 100mm in length (2.2kw) Vertical tenoning Unit 35mm shaft diameter a 180mm in length (3kw) Year 2002 Ex College Machine Condition - Like New Ljdpfxozudt Uj Ahajah

Condition: used, Year of construction: 2007, Manufacturer: Stephan Model: UM44 Year: 2007 Condition: Used Serial number: 732266 Stock number: 3379 Bowl: 44 liters Capacity: max. 30 liters Knives: 3 speeds, max. 3000 RPM Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 550 x 800 x 1200 mm Weight: 150 kg Lods Adqrmspfx Ahasah With the option to add a vacuum pump.

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). Lasdpfjzzwg Usx Ahaeh 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: B59188, total width: 62 mm, total height: 135 mm, total length: 83 mm, overall weight: 158 kg, input voltage: 230 V, input frequency: 50 Hz, The Mercury TP-702RS is based on the Mercury TP-702 and equipped with specially designed components. The machine is suitable for strapping small or round products, such as plastic pipes, steel bars, and hardwood elements. Lsdpfx Ahe Adq Eajasah The TP-702RS can strap packages from 40 mm width × 10 mm height, or round bundles from Ø 32 mm when bundling 2 pieces. Thanks to its reliable operation and high strapping speed, this machine is ideal for applications involving small or round products.

Condition: excellent (used), Year of construction: 2020, Vutek 5R+ Ultradrop LED UV Roll Printer Color: 4C+ White EXTREME speed and quality Up to 460 m2 per hour True resolution up to 1200 dpi UltraDrop™ Technology with native 7 pL printheads and true multi-drop addressability for high-definition image quality, outstanding smoothness in shadows, gradients, and transitions, and superb text quality with small text in both standard and high-quality modes, with fewer satellites and greater clarity in all print modes Installed in 2020 (manufactured at the end of 2018) Prints with 5m rolls, triple roll capability, 1.6m width Horizontal cut: automatic Vertical cut: blade system Laodpfxs Adq Nxs Ahaeh Double-sided printing Mesa/Textile Kit Under EFI service contract: Last EFI annual full service completed in October 2025 Available at the end of 2026

Condition: reconditioned (used), Year of construction: 2022, Vutek H5 UV LED Hybrid Printer Print width 3.2m, suitable for both sheets and rolls Color: 8 colors + white and varnish Ledpfx Ahe Adq Uzeajah Resolution: 7pl true 1200 dpi ultradrop Speed: Up to 457 m²/h EFI Fiery RIP server

Condition: used, Doka-Framax Xlife formwork - New price: Net €514,000.00 Lodpfx Ahj Acf Umoajah - Starting price: €58,000.00 - Detailed information can be found under the photos.