Used Ceever Spraymaster Turning for sale (7,636)

Condition: excellent (used), Year of construction: 2007, operating hours: 7,690 h, functionality: fully functional, machine/vehicle number: NL301GJ1021, Technical data - MORI SEIKI NL3000Y/1250 Nsdsy Sxh Depfx Akuect Operating hours: 7,690 h Year of manufacture: 11/2007 Number of axes: 5 X-axis travel: 280 mm Y-axis travel: 120 mm Z-axis travel: 1,300 mm Spindle bore: 105 mm Number of tools: 12 Spindle power: 22 kW Spindle speed: 3,000 RPM Swing over bed: 995 mm Swing over cross slide: 825 mm Maximum turning diameter: 420 mm Bar capacity: 90 mm Maximum turning length: 1,260 mm Milling motor power: 5.5 / 3.7 kW, speed 6,000 RPM Rapid traverse rates (XZ): 30 m/min Tailstock body travel: 1,284 mm Tool setter, 3-jaw chuck, coolant system, interlocked safety guards, low-voltage lamp Dimensions (approx.): L x W x H: 5,200 x 3,400 x 2,270 mm Weight approx. 8,100 kg

Condition: excellent (used), Year of construction: 2008, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 clamping diameter 32 mm spindle turning speed range 7000 U/min workpiece length - max. 150 mm Njdsvwgmyopfx Akusct feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 Nodsxq Hk Uopfx Akujct spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 590 mm, turning diameter: 270 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 215 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 90 mm, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this INDEX G300Y/B CNC turning and milling center, manufactured in 2000 and completely overhauled in 2020, for sale. Machine type: INDEX G300Y/B Machine number: 500087 Nsdpfoy Sz Akjx Akuect Overhauled: 04/2020 Power supply: 3~ Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 120 A Please refer to the attached PDF for detailed technical data. The machine includes a parts handling system with a conveyor belt on the counter-spindle side. The electrical system has been completely renewed, and the machine is running on Sinumerik one. We acquired this machine to gain initial experience in the field of turning/milling centers. We are now acquiring a new machine, and once it is installed and in production (Q4/2026), the G300 will be available for sale. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Nodjyvqdfopfx Akuect Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1995, CNC lathe Traub TND400 Year of manufacture 1992 Defective, not operational: Main drive, Baumüller converter defective. Ncjdpfsy Dpq Tox Akujt Equipment: TX8F control Hollow chuck cylinder Depth stop Tailstock CNC lathe Traub TND400 Year of manufacture 1993 Defective, not operational: Main drive, Baumüller converter missing. Telescopic cover for the Z-axis in the front area defective. Protective shield in the machine door missing. Central lubrication pump missing. Machine interior lighting defective. Chip conveyor jams. Equipment: TX8F control Hollow chuck cylinder Depth stop Driven tools C-axis, Polyform Tailstock Traub CNC lathe TNA300 Year of manufacture 1995 Equipment: TX8H control Hollow chuck cylinder Depth stop Driven tools, with 3 tools each in the X and Z directions C-axis, Polyform Tailstock Collet chuck LNS bar feeder

Condition: good (used), Year of construction: 2004, The machine is powered and available for inspection. Njdpsy Eb Rhsfx Akuoct

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Ncsdpfx Ajy Eb N Dskust

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Ncodpfxjy Ixxbo Akust Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 187859, turning diameter: 380 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 4,500 rpm, bar passage: 65 mm, overall weight: 4,900 kg, Mazak QTN-200MS CNC turning and milling center, manufactured in 2006 with subspindle and driven tools Main spindle with Kitagawa chuck and Hainbuch collet chuck, 35-5000 rpm. Subspindle with Kitagawa chuck, 35-6000 rpm. All 19 tool holders, including 5 driven tools Ncsdjy Tb D Depfx Akuot Jaws, collet chucks, wrenches and accessories shown in the photo are included. 12-position turret Parts catcher, chip conveyor >>Bar feeder FMB SL80 V (year 2020) >>Conveyor belt The machine has been very well maintained. Hydraulic oil, lubricants, and operating fluids have been recently changed. The machine can be inspected while in operation. Model: QTN-200MS Serial number: 187859 Weight: 4900 kg Weight: 10780 lbs Year of manufacture: 2006 If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,809 h, functionality: fully functional, machine/vehicle number: 7023000520B, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing and have now been removed. Please refer to the updated scope of delivery as per the current images – approximately half of the accessories shown pertain to this machine. TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Ncedpfx Asy Rxtwjkuot Max. turning length: 705 mm Bar capacity: 80 mm Travel X-axis: 260 mm Travel Y-axis: 50 mm Travel Z-axis: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Max. speed of driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. Ncsdoyq Hq Nspfx Akuet The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,067 h, functionality: fully functional, machine/vehicle number: 122616, travel distance X-axis: 500 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 1,650 mm, controller model: OKUMA OSP P200L, center width: 1,500 mm, TECHNICAL DETAILS Travel in X-axis: 500 mm Travel in Y-axis: 95 mm Travel in Z-axis: 1,650 mm Swing over bed: 550 mm Power: 22.0 kW Distance between centers: 1,500 mm Spindle bore: 80 mm Counter spindle speed: 4,500 rpm Tool magazine: 44 tools Tool holder: HSK-F63 Spindle speed: 12,000 rpm MACHINE DETAILS Control system: OKUMA OSP P200L Nsdpfx Akjy Rxprouoct Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,800 x 2,900 mm Shipping weight: 13,700 kg Shipping packages: 7 pieces Operating hours: 19,067 h EQUIPMENT Automatic workpiece loader with controlled arm from Pneumotec Automatic bar feeder from LNS Quick Load Servo III Counter spindle VAC-MB11 Milling head with automatic tool changer Turret: 12 tool positions Chip conveyor Turret head Powered tools Bar loader 3-jaw chuck Tool magazine C-axis Documentation CE marking

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter Ncjdpfxey Sfx Ne Akuot − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 195125, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, overall weight: 5,040 kg, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling capabilities, as well as integrated B- and Y-axes, this machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. The machine was built in 2007 and is equipped with the powerful MAZATROL Matrix control unit, allowing for both conversational and ISO programming, and offering modern features for efficient and productive manufacturing. Technical Data at a Glance: • Travel range: 410 mm on the X-axis, 140 mm on the Y-axis (±70 mm), and 570 mm on the Z-axis. The B-axis features a swiveling range of 225°, enabling complex five-sided machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. • Maximum turning and swing diameter: 545 mm each. • The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW of power output, making it ideal for milling, drilling, and tapping operations. Ncodpfx Aeyir I Rskujt • The machine is equipped with a tool changer (included), allowing a maximum tool length of 210 mm, as well as a KM tool holder system which ensures high rigidity and fast tool changes. Equipment includes: • Chip conveyor • “Tool Eye” tool measurement system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Nedpfx Akjwaikxouoct Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis Njdoku Aaaopfx Akusct 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Nsdpfx Akjmb Urdoujct Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter Nsdpowpufgefx Akuoct 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Nodsvgcpvepfx Akusct Height: 2800mm Weight: 14500kg

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm Njdpfx Aerg A N Nekujct width 1600 mm height 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, turning length: 1,020 mm, turning diameter: 540 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 565 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,077 mm, overall weight: 12,500 kg, 🛠️ Description For sale is a powerful CNC turning and milling center, MORI SEIKI MT 2000SZ, with a subspindle and Y-axis. ⚙️ Technical Data Control: MSX-501 Travel X / Y / Z: approx. 565 / 160 / 1,077 mm Max. turning diameter: approx. 540 mm Max. turning length: approx. 1,020 mm Main spindle: up to approx. 4,500 rpm Tool spindle: up to approx. 8,000 rpm Tool holder: Capto C6 Tool positions: depending on the configuration Axes: X, Y, Z + subspindle ⏱️ Operating Data Spindle: operating hours: approx. 33,600 h Machining time: approx. 14,200 h Subspindle: operating hours: approx. 18,100 h Machining time: approx. 11,500 h (further data see pictures) 📦 Equipment Subspindle (SZ version) Powered tools Y-axis Chip conveyor Coolant system Multitasking function (turning & milling) 📌 Condition The machine is in used, functional condition. Ncsdsy Sm U Sjpfx Akuet Tool holders (turning tools and Capto) are included in the scope of delivery. Cutting inserts are not included. 🚛 Delivery & Conditions Sale is ex works / free loading Dismantling and loading can be arranged upon request Sale without warranty 📞 Contact If you are interested or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm Ncsdpfx Ajxq Hkzjkust z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Spindle bore 80 mm (main spindle); Nsdpfx Aksy R S Uzsusct All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, turning length: 800 mm, bar diameter (max.): 104 mm, 1 DMG Mori CTX 800 TC, year 2014 Control unit: Siemens 840 D SL with Shop-Turn 3 G Turning length: 800 mm Main spindle as integrated spindle motor ISM 76 with 5,000 rpm Hydraulically actuated collet chuck 104 mm Draw tube inner diameter: 104 mm Nedpfx Akey Svvrsuect C-axis with spindle brake Upper cross slide with turning/milling spindle HSK 63 As motor spindle with hydraulic clamping during turning Y-axis ±100 mm, B-axis ±110° Tailstock automatic/programmable Absolute linear measuring systems in X and Y axes 5-axis simultaneous machining Technology cycles Tool magazine with 48 stations HSK 63 Differential pressure clamping Chip conveyor, ICS (internal coolant supply) Automatic positionable steady rest slide Z-axis slide for steady rest carrier Steady rest incl. quick-change system Tropical package Infrared measuring probe Renishaw Oil mist separator