Used Chainstitch-Multi-Needle Quilter Mammut for sale (5,893)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Gkodpfxjwm Iy Ej Afusc Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,000 kg, Double pallet fork ISO Class: ISO Class 3 = 2,500 - 4,999 kg Godpfsw Dwqnjx Afuekc Condition: Ready for use and fully functional Technical condition: good Description: Year 2015, ISO 3A (51 cm), Capacity 3,000 kg, Sideshift, Opening range 560-1960 mm, Width 1,350 mm, Forks 1,150 mm, ID OS1539

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Gkedew Egn Sepfx Afuoc Condition: Ready for use and fully operational Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 2,600 kg Sideshift Opening range 560-1,930 mm Width 1,200 mm Forks 1,100 mm ID OS1612

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Godpfx Ajyqpqxefuskc Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 2,500 kg, Double pallet fork Load centre: 600 mm Godjx N U Stopfx Afuokc ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2011 ISO 3A (51 cm) Capacity 2,500 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,150 mm ID OS1768

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 3,800 kg, Multi-pallet fork Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: As new Gksdpfxjx Raa Ss Afujc Technical condition: Very good Description: Year 2021 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 560-2,450 mm Width 1,800 mm Forks 1,200 mm ID OS1797

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 4,000 kg, Double pallet fork Load center: 6000 Gsdpfox Rab Njx Afujkc ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 4A (61 cm) Capacity 4,000 kg Sideshift Opening range 560–1960 mm Width 1,200 mm Forks 1,000 mm ID OS1804

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 2A (41 cm) Capacity 2,500 kg Godex Radqopfx Afuekc Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,150 mm ID OS1818

Condition: used, functionality: limited functionality, load capacity: 4,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Gkedpfxjx Rk R Uj Afuec Technical condition: poor Description: ISO 3A (51 cm) Capacity 4,500 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,200 mm ID OS1836

Condition: good (used), Year of construction: 2017, Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available Gkedpfx Asxbcrisfuec -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Max forward speed: 30 mt/min Gkedpfeyz Slbox Afuec Number of shafts: 1 Motor Power: 90 KW

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,000 kg, Multiple-pallet fork Load center: 1200 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 4B (61 cm) Capacity 6000 kg Side shift Opening range 1340-2700 mm Width 2260 mm Fork length 2400 mm Gkodjzllvrspfx Afuoc ID OS2028

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Gkedpfx Afszhntreujc

Condition: used, axle configuration: 3 axles, first registration: 08/2008, total length: 9,570 mm, total width: 2,470 mm, total height: 1,200 mm, tire size: 385/65R22.5, tire condition: 30 %, color: red, Year of construction: 2008, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Unladen weight: 5,300 kg Payload: 37,700 kg Gsdjzufckjpfx Afuekc GVWR: 43,000 kg Extendable body: Yes Damage: None = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Gjdjzwg Tiepfx Afuokc Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant Godpfxsvh Naqj Afuskc

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: Gsdox Dkyyopfx Afujkc - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,500 kg, Multiple Pallet Fork Load Center: 600 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for operation and fully functional Gkedpfx Afeyi Nbbjusc Technical Condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,500 kg Sideshift Opening range 560-2,760 mm Width 1,980 mm Forks 1,150 mm ID OS1873

Year of construction: 1992, condition: ready for operation (used), A 14-head Ishida scale with a display replaced a few years ago is available. Throughput: approx. 80weighings/min, portion range: 10g-500g, deviation: +/-1g, machine dimensions X/Y/Z: approx. 1600mm/1500mm/1900mm, weight: approx. 700kg. An on-site inspection is possible. Gedpfxszq Ec As Afujkc

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit - Working thickness up to 40mm - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling - Automatic panel positioning Gkjdpfxoz Ag E No Afuoc - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: limited functionality, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Gjdszxx Dvjpfx Afuekc

Condition: used, 5.45 m internal length Environmental valves French valve = Further information = Color: Red Dimensions of the cargo area: 545 x 227 x 125 cm Type number: CONTAINER / MULTIKAPPEN / FRENCH = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We also speak Russian. We make every effort to provide correct information; however, no rights can be derived from the information provided. Gsdpjziitisfx Afujkc

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 2,200 kg, Double pallet fork ISO class: ISO Class 2 = 1,000 - 2,500 kg Gedpszigtyjfx Afuekc Condition: Ready for use and fully functional Technical condition: good Description: Year 2016 ISO 2A (41 cm) Capacity 2200 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS1976

Condition: used, Year of construction: 1995, Multi-blade saw with infeed and stacking system Manufacturer: Paul Type: K 34G / 1500 Year of manufacture: 1995 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Gksdpezuyydjfx Afuoc

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Gksdpfx Afszt Ip Rsuoc Identification No. 950672. Year of manufacture probably around 1995.