Used Cidan Metal Cutting Machine for sale (68,702)

Condition: good (used), Year of construction: 2013, chuck outer diameter: 250 mm, through hole: 100 mm, Metal cutting Tooling CBT - 250 MACH-ID 2996 Ledpezdiihefx Akyshh Make: CBT Type: 250 Year: 2013 Diameter: 250mm 3 Chuck: x Spindle bore:100mm Connector: 70 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, chuck outer diameter: 250 mm, through hole: 75 mm, Metal cutting Tooling Lodpfjzdih Dsx Akyjhh ROHM - 250 MACH-ID 2997 Make: ROHM Type: 250 Year: 1999 Diameter: 250mm 4 chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, chuck outer diameter: 300 mm, through hole: 70 mm, Metal cutting Tooling MANDELLI - 200 MACH-ID 2998 Make: MANDELLI Type: 200 Year: 1998 Diameter: 300mm 4 chuck: x Spindle bore:70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhsdpfjzdig Uox Akysh

Condition: good (used), chuck outer diameter: 310 mm, Metal cutting Tooling PRATT BURNED MACH-ID 2999 Diameter: 310mm 4 chuck: x Spindle bore:74mm Lhedpfx Akszdigbeysh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), through hole: 50 mm, three-jaw chuck diameter: 200 mm, Metal cutting Tooling CBT - 200 MACH-ID 3000 Make: CBT Type: 200 Year: 2001 Diameter: 200mm Lhodpozdifwsfx Akysh 4 chuck: x Spindle bore:50mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Ljdpfx Asymy I Hekyshh Condition: used Machine type: paper cutting machine - Guillotine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), three-jaw chuck diameter: 200 mm, through hole: 55 mm, Metal cutting Tooling CBT MACH-ID 3001 Make: CBT Year: 2014 Diameter: 200mm 3 Chuck: x Lhjdpjzdid Tsfx Akysh Spindle bore:55mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Ljdpfszdidtox Akyshh Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, three-jaw chuck diameter: 455 mm, through hole: 115 mm, Metal cutting Tooling PRATT BURNED Ledpfszdic Asx Akyjhh MACH-ID 3005 Make: PRATT BURNED Year: 1990 Diameter: 455mm 3 Chuck: x Spindle bore:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, cutting speed: 10,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 3,150 kg, total length: 9,530 mm, total width: 1,950 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF6020T Tube Laser Cutting Machine – 1.5–6kW Fiber Laser Tube Cutter, TÜV-CE Certified The SENFENG SF6020T is a versatile and efficient tube laser cutting machine for the precise processing of round tubes, square tubes, rectangular tubes, and various profiles. With laser powers ranging from 1.5kW to 6kW, it is suitable for metal fabrication companies, tube processors, furniture manufacturers, fitness equipment production, construction machinery, vehicle frames, shelving systems, and general industrial manufacturing. The SF6020T is equipped with follow-up support, a pneumatic self-centering chuck, and a professional CNC system for tube processing. It offers stable cutting performance, strong dynamics, and reliable accuracy in daily operation. Key Technical Data: • Model: SENFENG SF6020T • Laser Power: 1.5–6kW • Tube Length Range: 2000–6500 mm • Round Tube Range: Φ20–Φ220 mm • Square Tube Range: □20–□150 mm • X/Y Positioning Accuracy: ±0.05 mm • X/Y Repeatability: ±0.03 mm • Maximum Rapid Traverse Speed: 100 m/min • Maximum Chuck Speed: 100 rpm • Maximum Acceleration: 1.0G • Maximum Tube Load: 200 kg • Tube Weight: ≤33 kg/m • Machine Weight: approx. 3150 kg • Machine Dimensions: approx. 9530 × 1950 × 2200 mm • Power Supply: 3-phase, 380V / 50Hz • Protection Class Main Power Supply: IP54 • TÜV-CE Certified Processable Tubes and Profiles: • Round Tubes • Square Tubes • Rectangular Tubes • Oval Tubes (on request) • I-Beams • U-Profiles / Channel Steel • H-Beams • Equal-Angle Steel • Unequal-Angle Steel The pneumatic self-centering chuck enables fast and efficient clamping. The lightweight, low-inertia design supports high rotational speeds, reduces energy consumption, and lowers operating costs. The integrated chuck cover protects against dust and cutting debris, increasing reliability during continuous operation. The follow-up support system supports long tubes during processing and reduces accuracy losses due to deflection. The machine bed is made of welded rectangular tubes and is stress-relieved and precisely machined. This ensures high rigidity, low vibration, and long service life. The FSCUT 3000DE-G CNC system was specifically developed for tube laser cutting. It supports real-time compensation of tube center deviation, automatic loading and unloading, follow-up support function, tube process library, TubePro cutting software, and professional TubesT nesting software. Optional Automation: • Semi-automatic Loading System Lhjdozd Enxepfx Akyoh • Simplified Fully Automatic Loading System • Fully Automatic Loading System • Standard Unloading System 2 m • Optional Unloading System 3 m / 4 m SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. Other available TÜV-CE certified SENFENG tube laser models: SF6020T, SF6035T, SF6038T, SF9020T, SF6020NT, SF6038NT, SF9032NT, SF9035NT, SF9038NT, and SF12038NT.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine Ljdpszd Dz Refx Akyohh The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] Lhodpox Ed A Refx Akyoh - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Lhsdektffzjpfx Akysh Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, STC-Ref: G-071-2423 Polar 78-ES, Year: 1998 format: 0x780 mm Lodpfezdu N Eox Akyohh equipped with: - safety light beam - photo-cell - rear table guard - datastore for programmes - airtable at left side - airtable at left side - airtable - monitor

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to 230k!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Ledpfx Aeyui Ekekyshh Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Industrial High-Performance Sheet Pan Cleaning Machine TOP Jeros Model: 9029TS with 9020 Capacity: 800–1000 trays/hour With oiling system/for external oil tank Touchscreen control for automatic sheet pan cleaning Premium stainless steel construction Connection: 400V, 16A-CEE plug Ljdjxwtnyepfx Akyshh Used machine, cleaned Options: Maintenance contract Service package Delivery service Commissioning / Training Visit our large machinery warehouse!

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production. Lhjdpfxeyga T No Akyoh

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part Ledpfx Asv T Trujkyehh - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. Ljdpeym Unzefx Akyjhh The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Ljdjy Nmycspfx Akyjhh Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged. Lsdpjyhnuksfx Akyohh

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. Ljdozc I Exjpfx Akyohh We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). Regards, Henk Hoos.

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2540, laser type: CO₂ laser, laser source manufacturer: BYSTRONIC, laser source model: BYLASER 4400, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, power: 52 kW (70.70 HP), input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, overall weight: 12,000 kg, total length: 13,000 mm, total width: 6,000 mm, total height: 2,200 mm, Equipment: documentation/manual, BYSTRONIC BYSTAR 3015 laser cutting machine - including dust extraction system and Donaldson dust collection system, as well as a pallet changer and a BYSTRONIC BYLOADER 3015 loading system - Cutting head Z-axis travel: 170 mm - Max. load capacity of pallet changer: 890 kg Lodpfxszdzi Sj Akyohh - Max. material thickness that can be cut: steel: 0.8 - 25.0 mm, stainless steel: 0.8 - 20 mm, aluminum: 0.8 - 12 mm Note: the machine can be transported on a standard truck! Note: the item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen - loaded onto a truck

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: Lhjdpfx Akjzgdcaoyeh – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Ljdozgda Sepfx Akyohh Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.