Used Coining Press - Single Column - Hydr. for sale (24,694)

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm Nedpfx Aju N Ddwebzocw throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: Nsdpfx Aeu N A Uusbzjcw - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Nodpou N A U Isfx Abzscw For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm Nsdpju Nfg Hofx Abzocw passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm Njdpeu Nfi Uofx Abzjcw height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm Ncodexu Dwmepfx Abzew ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm Ncedpfx Abju Nfhqezow total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. *

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Ncedpey Tpr Aefx Abzow Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm Ncjdpfx Aboy Tvdxozjw - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm Nodpfx Aovb I Itjbzscw table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW Ncodpfjtqqxbex Abzow weight of the machine ca. 1,45 t dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm Ncedpfx Ajugnpiobzsw stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Ncedpfji Db Ibsx Abzjw Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Ncodpfx Abjv Uraaezow Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 1977, pressure 25 t throat 250 mm stroke 400 mm table surface area 600x480 mm Njdpfx Absy Sliuszocw ram surface Ø135 mm table height 980 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm Ncedpfey I Dd Nex Abzjw table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm ram - range of adjustment 85 mm hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm Ncsdpfxsy I Ddvs Abzsw weight of the machine ca. 3,2 t

Condition: used, pressure 150 t Table dimensions 1000 x 360 mm voltage 400 V Ncjdeyuqdhjpfx Abzow

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Ncjdpfx Abotx E Rqszjw Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, pressure 150 t Table dimensions 1000 x 630 mm voltage 400 V Inclineable mechanical press with Ncodpfoyqv Ahox Abzjw updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 77000 € 1455.3 € 70 to 4 mm 920 mm 500 mm 180 mm 12 - 120 mm 50 - 80 1/min 8 80 mm 260 mm 560 mm 7.5 kW 1225 mm 1865 mm 3060 mm 7000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Nsdpjyq Snmofx Abzjcw Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view - overload protector

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 250 t, table width: 1,000 mm, table length: 1,200 mm, die cushion stroke: 200 mm, The machine still needs to be built. Requirements can be considered where possible. Ejector in ram – approx. 10 t. Table draw cushion approx. 800 x 850 mm. Weight approx. 18 t. Stroke approx. 600 mm. Nodpfxovga H Ej Abzscw

Condition: new, pressure 17,0 kN Njdpjfv Avvjfx Abzocw stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 26,0 kN stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column Ncodsfv Avrjpfx Abzjw

Condition: new, pressure 34,0 kN Ncjdpfjfv Avyjx Abzsw stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.