Used Comec Egs for sale (242)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1 kg, maximum load weight: 4 kg, overall weight: 6 kg, axle configuration: 1 axle, tire size: 15.0/55-17 10 pr, Further information Chassis central axle tipper trailer Welded steel construction Heavy-duty front support wheel, folding Wheel chocks with holder Steel underride guard Quarter-shell mudguards Towing device central axle trailer Rigid drawbar for top hitching, 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Rigid Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 15 PR manufacturer's choice Factory silver steel rims Brake system Overrun brake - Rückmatik Release valve Integral air reservoir 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 12 volt, 2 five-chamber lights, without lighting carrier with impact-resistant glass 2 white position lights at the front 2 white/red lane departure lights at the rear 7-pin plug Hydraulics 3-stage tilt cylinder Bdsdpfx Aei Riypsd Aob Limit switch Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic actuation via truck power take-off Tipper bodies Sturdy tipper body, steel side wall structure, continuous side walls, hinged and pendulum-mounted Platform length approx. 4,000 mm, side walls with 5 hinges at the bottom. Platform width 2020 mm 4 pairs of lashing eyes in the floor, 2.5 tons each Country of approval / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation15-year warranty against rusting through Dropside/bridge RAL 6005 moss green

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions Bjdpfx Aoi Ri Eied Aedb The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: used, mileage: 383,450 km, power: 335 kW (455.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,730 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ANTOS 2546 L Beverage Box Truck 7.70 m with BÄR Tail Lift 2,000 kg * Body: EWERS SWING WALL Canopy * Hydraulically steered third trailing axle * ONLY AVAILABLE WITH TRAILER Vehicle No. 4452 as a package Net price €59,650 + * Vehicle No. for customer inquiries: 4449 * Engine specification Euro VI with OBD-C * Trailing axle, 7.5 t, steered, liftable * Predictive Powertrain Control * Secondary water retarder * Active Brake Assist * Rear axle differential lock * Air conditioning * Lower sleeper bunk * Lane departure warning system * Environmental badge (green) * Attention Assist * High Performance Engine Brake * Rear axle air suspension * Lockable air deflectors * Axle configuration 6x2 ENA * Full service history * Stability control system (ESP) * Front axle air suspended * Additional hot water heating, cab * Trailer brake connection at rear, Duo-Matic + standard * Trailer brake, 2-line, brake connectors left * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver comfort air-suspension seat * G 211-12/14.93-1.0 gearbox * Mercedes PowerShift 3 * Tire pressure monitoring * Central locking system * External, transparent sun visor * Digital tachograph, EG, rev counter * 390 l fuel tank, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Low storage tray on engine tunnel * AdBlue tank 60 l, left * Start assist, speed limit 30 km/h * Roof hatch/ventilation flap * Heating, electronic air supply unit * M-Cab ClassicSpace, 2.30 m, 320 mm tunnel * Engine OM470, inline 6, 10.7 l, 335 kW (455 hp), 2200 Nm * Wheelbase 4600 mm * Tubeless tires, 315/70 R 22.5 HA * Tubeless tires, 315/70 R 22.5 VA/VLA/NLA * Reverse warning system * Preparation for toll registration * Additional stabilizer, rear/trailing axle * Aluminum wheels 9.00 x 22.5, Speedline * Weight variant 26.0 t (8.0/11.5/7.1) * Preparation for low coupling system Bdedpfx Aoxx D S Sod Aob No liability for printing or typographical errors Sale to trade only Errors and prior sale reserved* Changes, prior sale and errors expressly reserved. The description serves for vehicle identification and does not constitute a guarantee under sales law. The vehicle specification as per the sales contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING, FINANCING, or HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV tail lift / Tachograph inspection and OBU installation arranged through our local partners * Zoll (customs) license plates for 30 days All export customs documents possible, but must be requested individually * Toll Collect registration available in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Condition: used, Year of construction: 1989, functionality: fully functional, Paper Guillotine PERFECTA 168 – Year 1990, equipped with new electrical system (standard-compliant retrofit) and EG Control Graphic programmer. Complete with enlarged side tables and air-assist triangles, 2 spare blades, accessories, and manuals. Very robust machine, suitable for carton production and aluminum cutting, in good condition and fully operational. Bdjdpfjy Aur Tex Ad Aeb

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Bdjdpfx Adst Uw Avs Aeb Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, tire size: 385/65 r22,5, Year of construction: 2019, Further information Bodpfx Aji Ri Dzod Ajdb Welded fine-grained steel construction, front stop, longitudinally adjustable and foldable, removable pair of guide rollers, front and rear, Swap Guard - swap body guide, in front of and behind each container lock, 4 container locks with sturdy outriggers on 20-base for swap bodies 7.15 and 7.45, turntable with strong ball bearing slewing ring, wheel chocks with holder, Aluminum side collision protection, side collision protection set inwards for optimum clearance to the swap body supports, steel underride guard, underride guard shortened for optimum clearance to the swap body supports, lighting system mounted in a protected position, quarter-shell mudguards at the front and half-shell mudguards at the rear, without impact protection, spare wheel holder in basket design, plastic toolbox Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake systemColored line routing for easy servicing, air supply 208 liters, spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, )Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with lifting & lowering valve, holding function in lowering / lifting position, brake release function via button on the vehicle next to H & S valve, for releasing the brake when coupled, EBS power supply must be guaranteed! 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable, additional LED work light(s) at the rear, switched via reversing light, LED work light at the front centered between the beams, shining to the rear, switched via reversing light Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, hinged, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, tire size: 385/65 r22,5, Year of construction: 2019, Further information Bsdpfx Asi Riz Hjd Aodb Welded fine-grained steel construction, front stop, longitudinally adjustable and foldable, pair of removable guide rollers, front and rear, pair of removable guide rollers, additional 4 container locks with sturdy outriggers on 20-base for swap bodies 7.15 and 7.45, turntable with strong ball bearing slewing ring, wheel chocks with holder Aluminum side bumpers, steel underride guard, quarter-shell mudguards at the front and half-shell mudguards at the rear 1 spare wheel holder for 1 e-wheel, with wheel fastening set in basket design Drawbar with tested 40 mm drawbar eye, drawbar height adjustment via spring BPW disc brake axles, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS made by Wabco, electronic brake system with EBS plug at the front, with connecting cable, (Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with lifting & lowering valve, holding function in the lowering / lifting position in each case 24 volt, 4 x 3 chamber lights + 1 round reversing light + 1 round rear fog light, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable, 1 additional LED work light(s) at the rear, switched via reversing light, 1 LED work light at the front in the middle between the beams, radiating to the rear, switched via reversing light Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour markings with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: good (used), functionality: fully functional, Year of construction: 2010, working width: 3,000 mm, color: red, Hello I have for sale Kverneland EG 85 Vario 6 skid plow on 300 head, the machine in continuous operation, below its parameters: Distance between bodies (cm) 85 Head 300 Type of protection Non - Stop (spring) + additional Casing plowing width (cm) 30 - 50 cm Clearance under the frame (cm) 70 - 75 c Number of bodies 6 Bdsdpfeuaziiox Ad Asb I invite you to purchase.

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Bdsdpfxoqmc Raj Ad Asb Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG Bodpfei Hmpijx Ad Ajdb cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: used, mileage: 243,000 km, power: 350 kW (475.87 HP), first registration: 09/2022, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, D6G Automatic climate control, A1C front axle 7.5 t, A1Z front axle in offset design, A2E rear axle with 440 crown wheel, hypoid, 13.0 t, B1B electronic braking system with ABS and ASR, B1F heating, electronic air supply unit, B2A disc brakes on front and rear axle, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low, C0G rear frame overhang 1050 mm, C1W wheelbase 3700 mm, C5D access behind cab, left, C5P frame bolted, C6G steering Servotwin, C6I servo pump, regulated, C6Q stabilizer front axle, C7F front underrun protection (ECE), aluminium, C7T integral rear, C8C rear axle fenders, 2500 mm vehicle width, C8H 3-piece fenders with EG splash guard, C8I splash guard (EG) front, C8Y underbody cladding, aerodynamic, D0A leather steering wheel, D0S compressed air connection in cab, D0U smoke detector in cab, D1C driver suspension seat, comfort, D1N co-driver functional seat, D2N seatback release, driver's seat, D3A comfort bed, upper, wide, adjustable, D3B comfort bed, lower, D3M PremiumComfort mattress, lower, D3N PremiumComfort mattress, upper, D3Q seat cover, velour, driver's seat, D3T seat cover, velour, co-driver and middle seat, D4S sun blind, one-piece, electric, windscreen, D4T curtain, across bed(s), D4Z sun blind, side, driver and co-driver side, D5Z carpet on engine tunnel, D6C electric stationary air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater. You can reach us by phone Monday to Friday until 20:00 and Saturday until 16:00! More details: Leasing/financing and trade-in possible! Errors and prior sale excepted! All details without guarantee ... more on our homepage Bodju Nnf Sepfx Ad Aedb

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 404 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,175 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork length: 1,200 mm, empty load weight: 5,860 kg, total length: 3,113 mm, drive type: Diesel, construction width: 1,620 mm, Diesel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tires Type: Pneumatic Front tires size: 14-17.5-16tl nhs black Rear tires Type: Air Rear tires size: 10-16.5-10tl nhs black Battery Volt: 12V Battery Ah: 95Ah Battery manufacturer: Heli Sideshift, Bdodpfx Asvdvw Isd Asb heating, load protection grille, full cab, Heli seat H2KE6-80072+armrest+pool belt sideshifter EG 30 SN: 0248 BJ: 05/2023

Condition: used, functionality: fully functional, machine/vehicle number: Fuhrpark, empty load weight: 6,000 kg, maximum load weight: 20,000 kg, overall weight: 26,000 kg, axle configuration: 2 axles, first registration: 04/2018, tire size: 205 / 65 r 17,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins Reinforcer mounting point for gallows mounting and with sturdy grinding plates drum profile made of flat steel underneath the outer frame. Outer frame slightly inclined with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder, aluminum side bumpers, offset inwards as far as technically possible, steel underride guard, as much ground clearance as possible, quarter-shell mudguards in front of and behind each axle, suspension strip for aluminum ramps at the rear, plastic toolbox, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) SAF drum brake axles, with axle stopsAxle distance 1600 mm, air suspension with lifting & lowering valve 205 / 65 R 17.5, twin steel rims, factory silver 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 24 volt, multi-chamber lights, amber LED lighting integrated in outer frame profile at the side, offset inwards by approx. 25 mm, 10 lights per side 2 white position lights at the front, protected, 2 white/red lane departure lights at the rear, additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin and 1 x 15-pin swap-proof sockets at the front, without connecting cable Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Special floor installation: test of new profiles, without bolting Bedpemp Ug Dsfx Ad Asdb Steel/checker plate covering in the wheel arch area, front wall/front stanchions, 25 mm aluminum hollow profile, approx. 800 mm high, steel corner stanchions in volume design, with viewing windows on both sides. Approval country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, Year of construction: 2025, total length: 7,790 mm, · Arbeitshöhe 18.19 m · Plattformhöhe 16.19 m · Maximale seitliche Reichweite 10.51 m · Ãoeberhang / Knickpunkt Gelenk 7.55 m · Korbarm-Drehwinkel (Boden) +-59.50 ° · Tragfähigkeit des Arbeitskorbs 230 kg · Drehung des Oberwagens 350 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 Bdsdpjx Avv Rofx Ad Ajb · Gegengewicht Versatz (Oberwagen bei 90°) 0.22 m · Innerer Wenderadius 1.38 m · äußerer Wenderadius 3.75 m · Fahrgeschwindigkeit - Transportmodus 5 km/h · Fahrgeschwindigkeit - Arbeitsmodus 1 km/h · Steigfähigkeit 45 % · Zulässige Neigung im Arbeitsmodus 5 ° · Bereifung Schaumgefüllt · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · Hersteller / Motor Modell: Kubota - D1105-E4B · Motornorm: Vorläufige Stufe 4, Stage IIIA, Stage V · Nennleistung Verbrennungsmotor / Leistung (kW): 24.80 p / 18.50 kW · Bodendruck 10 dan/cm2 · Hydraulikdruck 340 bar · Fassungsvermögen des Hydrauliktanks 54 l · Fassungsvermögen des Kraftstofftanks 52 l · Schwingungsbelastung Hand/Arm < 0 m/s² · Täglicher Verbrauch 4.26 l · Diese Maschine entspricht: Europäische Richtlinien: 2006/42/EG - Maschinen(Neufassung EN 280:2013) - 2004/108/EG (EMV) -2006/95/EG (Niederspannung)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control Bdodpfsw Ryt Dex Ad Asb +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating Bdedpfx Adoyuvq To Asb 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification Bsdpfxjtqfv Ie Ad Aodb - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, mileage: 3,800 km, power: 235 kW (319.51 HP), first registration: 02/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 49 m³, loading space length: 7,510 mm, loading space width: 2,420 mm, loading space height: 2,720 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Liftable trailing steering axle. ----Quick curtainsider drinks structure. ----* Connectivity board module (Rio Box) * 12-speed automatic transmission * MAN EasyStart (wheel immobilizer) * MAN EVBec (= Exhaust Valve Brake electronically controlled) * Sliding tarpaulin on the left and right sides * Rear axle differential lock * Traction control (ASR) * Rear axle with air suspension * Raisable trailing axle * Anti-lock braking system (ABS) * Emergency brake assistant (EBA) * 2-line trailer brake (EG) * Electronic stability program (ESP) * Disc brake * Full brake assistant * Battery main switch * Lane departure warning (LDW) * Driver's cab S (short) * Transparent outside sun visor * Electrically adjustable and heated outside mirrors * Driver's cab CC - the compact one (narrow, short, normal height) * Central locking with radio remote control * Immobilizer (transponder) * MAN Idle Speed transmission function Driving * Gearbox MAN TipMatic 12 12 OD * Parking air conditioning (roof mounted) * Automatic climate control * Hot water auxiliary heating * Heating for driver's seat * Reversing alarm Bodpfjurp Avox Ad Asdb * Tank 300 liters * Fog lights * Engine version Euro 6, E * Cruise control * Engine version with AdBlue * Load securing certified according to VDI2700 + DCE RL9.5 guideline * Pallet stop bar * Lashing eyes in the outer frame * Load securing certified according to DIN EN 12642 Code XL * Cross member for trailer coupling * Tow coupling at the rear * Driver's seat with air suspension * Rear ladder * Steered trailing axle * Rear doors * EBS * Without spare wheel ----Sale to commercial customers only! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Condition: used, mileage: 3,800 km, power: 235 kW (319.51 HP), first registration: 02/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 49 m³, loading space length: 7,510 mm, loading space width: 2,420 mm, loading space height: 2,720 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Liftable trailing steering axle. ----Quick curtainsider drinks structure. ----* Connectivity board module (Rio Box) * 12-speed automatic transmission * MAN EasyStart (wheel immobilizer) * MAN EVBec (= Exhaust Valve Brake electronically controlled) * Sliding tarpaulin on the left and right sides * Rear axle differential lock * Traction control (ASR) * Rear axle with air suspension * Raisable trailing axle * Anti-lock braking system (ABS) * Emergency brake assistant (EBA) * 2-line trailer brake (EG) * Electronic stability program (ESP) * Disc brake * Full brake assistant * Battery main switch * Lane departure warning (LDW) * Driver's cab S (short) * Transparent outside sun visor * Electrically adjustable and heated outside mirrors * Driver's cab CC - the compact one (narrow, short, normal height) * Central locking with radio remote control * Immobilizer (transponder) * MAN Idle Speed transmission function Driving * Gearbox MAN TipMatic 12 12 OD * Parking air conditioning (roof mounted) * Automatic climate control * Hot water auxiliary heating * Heating for driver's seat * Reversing alarm * Tank 300 liters * Fog lights Bedpfx Adouyq Hae Asdb * Engine version Euro 6, E * Cruise control * Engine version with AdBlue * Load securing certified according to VDI2700 + DCE RL9.5 guideline * Pallet stop bar * Lashing eyes in the outer frame * Load securing certified according to DIN EN 12642 Code XL * Cross member for trailer coupling * Tow coupling at the rear * Driver's seat with air suspension * Rear ladder * Steered trailing axle * Rear doors * EBS * Without spare wheel ----Sale to commercial customers only! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. Bdjdpfxex Np Eho Ad Ajb • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves • Tools optional available:1. Hemming Upper Tool2. Hemming Die3. 84° Die

Condition: used, Year of construction: 1988, operating hours: 14,890 h, Equipment: all wheel drive, Manufacturer: EDER Hydraulikbagger GmbH, 8359 Eging Model: M 835 Year of manufacture: 1988 Chassis No.: 61588 Permissible total weight: 21,000 kg Bodpfx Adoynfkps Aodb Permissible front axle load: 12,000 kg Permissible rear axle load: 12,000 kg Made in Germany The machine runs well.

Condition: used, Year of construction: 2003, gebraucht 2003 4544 prompt, Zwischenverkauf v Spanien 13800 € Bdjdpfx Adsyrhtze Asb 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm 1500 mm 1350 mm 1850 mm 950 kg 1,5 kW with 3-axis digital display or Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented Telescopic support centrally mounted, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned tilted toward the rear. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards behind the last axle, asphalt version, hinged to the mudguard, with hanging option at top of mudguard, mudguard shortened Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle, including forced lowering and traction assistance Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Bodpfx Aji Rix Ijd Aodb Brake System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure effective ABS function! With lift & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via tractor head unit through EBS, not installed in truck (must be prepped in truck, only for basic tire set) Electrics 24 volt system, multi-chamber lights, yellow LED side lighting Yellow LED side lights linked to indicator – "flashing side marker lights" 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic components and access steps at the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook lock. 2 clamping bolts with T-locks on the lower sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Body insulated design, Fliegl Asphalt Profi Thermo, insulated at front, side, bottom and rear with Fliegl Isotherm. Cover: BASIC, tarpaulin side cover Standing platform with access, connection plate for air/electric and brake with large space for optimal operation. Side roll tarp, stowed to the right side, central locking on left Approval/Country/License Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles as per RS 10 - 2013 Prepared for single-line license plate holder Warning panel per ECE 70 Paintwork Frame: DB 7350 novagrau (new gray) "10-year anti-corrosion warranty" Support legs: galvanized Body/Side tarp: RAL color as desired, single-color Roll tarp: RAL 7035 light gray Thermal insulation also available in BASICplus (sheet metal cover) and Premium (stainless steel cover)!

Condition: new, machine/vehicle number: 4499ca1b286f9f653066b5693, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis Semitrailer Tipper Fine-grained steel welded construction in basic lightweight design, kingpin plate with exchangeable 2'' kingpin Patented curved front wall 24t two-speed landing gear, single-sided operation, with straight base section, without thrust compensation Foldable underrun protection Half-shell mudguards Towing hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Axles in off-road configuration Air suspension 1st axle with automatic lift axle function, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake System 2-line compressed air braking system with color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without interconnecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With raise/lower valve Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via truck dashboard through EBS, without truck installation (the system must be pre-equipped in the truck; only on standard tires) Bedpfx Adei Ri Nie Ajdb Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked with indicator – "flashing side marker lights" 2x 7-pin foolproof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection included) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted bulkhead with external hydraulic components and ladder at the bulkhead. Greenline: conical and aerodynamic trough shape Shovel and broom holder outside on the bulkhead Membrane – Tailgate Tailgate as swinging door with double hinge, externally mounted, with dual hook locking. 2 clamping screws with T-handle locks at the bottom sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear and weight-optimized design Standing platform with ladder, connection plates for air/electric and brake lines with ample space for optimal operation Roll tarp stows to right-hand side, with central locking on the left-hand side Registration / Licences Country: Germany With DEKRA approval and certification (according to §13 EG - FGV) Body strength per EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective striping per ECE R 048, white at sides, red at rear Painting Frame: DB 7350 Nova Gray 10-year warranty against rust-through Support legs: black coated Trough in RAL color of choice, single color, subject to availability Roll tarp in RAL color of choice, single color Also available with hydraulic tailgate.

Condition: used, functionality: fully functional, machine/vehicle number: 25022, Year of construction: 2020, operating hours: 12,478 h, load capacity: 36,000 kg, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Volvo, DGUV certified until: 08/2026, front tire type: pneumatic tires (air-filled), front tire size: 295/60 R22.5, rear tire type: pneumatic tires (air-filled), rear tire size: 295/60 R22.5, total height: 3,191 mm, total length: 5,360 mm, total width: 2,500 mm, Equipment: UVV, air conditioning, full service history, Hub capacity 25 tons Fifth wheel: Holland FW 3510TR-EG, kingpin size 2 inches (50.8 mm) Maximum vertical load: 36 tons Shock absorbers on front axle Fifth wheel equipped with second sensor per StVZO Automatic engine stop after 5 minutes Speed limiter Rear axle differential lock Bjdpfxeyk Upgj Ad Aodb Fuel-hydraulic tank guard and battery protection Front axle wheel nut protection Rear axle air suspension with lowering function Air-suspended and heated KAB11 driver's seat with seat belt Electrically heated exterior mirrors Air conditioning Sun visor LED beacon ABS socket Trailer socket according to ISO / DIN 24V