Used Comec Mm05/3L for sale (647)

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Ksdpeizu Ntefx Ai Rsdr Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation Kdodpfx Ajzux H Asi Rjr - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Year of construction: 1992, condition: ready for operation (used), An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible. Kdedezq Edajpfx Ai Rer

Condition: used, mileage: 5,400 km, power: 110 kW (149.56 HP), first registration: 07/2021, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C with Winter Package 3L Turbo Diesel 110kW / 150 HP Iveco Engine Euro 6 Green Ksdpfx Aey N Hvdei Redr * Selectable all-wheel drive * 610 operating hours, 5400 km * 5-speed manual transmission with reduction gear * Right-hand drive * Wheelbase: 2450mm (short) * 4-channel ABS, 4-wheel internally ventilated disc brakes * High-pressure comfort hydraulics * Rear hydraulics * 2-way front swivel * Front leak oil line * Trailer tipping hydraulics * SWV 500 front attachment quick-change system * Attachment control console kit * Ball head trailer hitch * Repeater headlights with work light * Rear LED work light * Driver’s air suspension seat * Bluetooth radio * Power windows * Electrically adjustable, heated mirrors * Tires 285/65 R16C M&S * Reinforced rear axle * Reinforced front axle * Area clearing function * Road-speed-dependent spreading system * Air conditioning * 3-way tipper body with front wall extension * New TÜV/emissions test, new inspection/service, workshop-tested * 12 months warranty 12-month warranty on the base vehicle. Winter Package: Bucher Varioplow 2m, brine tank spreader Husky V13, year of manufacture 2021 - Leasing / financing / vehicle rental / trade-in / delivery possible. Additional attachments in various designs, new and used, in stock. You can find more vehicles from Fuso Canter and Multicar as well as various bodies and attachments at: -Subject to errors and prior sale. -Our terms and conditions apply.

Condition: used, mileage: 611,819 km, power: 315 kW (428.28 HP), first registration: 08/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2025, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), * HYVA hooklift * Steering/lift axle Kedpfjxq Nctex Ai Rjdr * 40mm Rockinger coupling * Parking heater * Air conditioning * Hill start assist * Differential lock ----Internal vehicle number: 11401-----Subject to errors & prior sale WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp

Condition: like new (used), Year of construction: 2023, DIVISIO 5100 (2023) Machine Type: Automatic Depaneling System Model: DIVISIO 5100 Transport height: 920 mm ± 50 mm Max. transport width: 460 mm Interface: SMEMA, Hermes, Siemens Transfer direction: Left to right or right to left Operating side: Front of the machine Fixed rail: Front of the machine Panel length: 70 to 460 mm Panel width: 50 to 460 mm Panel thickness: 0.5 to 5.0 mm Max. panel weight: 1.5 kg Max. PCB weight: 1.5 kg Component height, spindle-side: 8 mm; partial 18 mm (other height on request) Component height, gripper-side: 40 mm Trays on lane 2: 600 x 400 mm Power supply: 400V, 208V 50/60Hz, ±10% Power supply system: 3L + N + PE Fuse protection: 3x C16 A without ELCB Power consumption (without suction): 0.8 kW Air supply: 6 bar Air consumption: 120 Nl/min Ksdpfx Aisv R D Nlo Rsdr Machine dimensions (L x W x H): 1200 x 2360 x 2152 mm Weight: 1800 kg (standard equipped) Speed (X, Y): 2000 mm/s Speed (Z): 1500 mm/s Acceleration (X, Y): 20 m/s² Acceleration (Z): 15 m/s² Positioning accuracy: ±0.02 mm (20°C ±1°C) Repeatability: ±0.005 mm (20°C ±1°C) Cutting accuracy: ±0.08 mm (20°C ±1°C) Noise level: < 75 dB(A) (may vary due to material mix of the panel)

Condition: excellent (used), Year of construction: 2013, Well-maintained HMF 2420-K3 loading crane from 2013, featuring remote control and 6 hydraulic functions. Suitable for mounting on a truck and ideal for construction, transport, recycling, and industrial applications. This powerful HMF loading crane offers excellent lifting performance and is prepared for use with a rotator and grapple. A reliable and versatile crane, ready for immediate professional use. Specifications: HMF 2420-K3 Ksdpfx Aiozl Tuce Rjdr Year of manufacture: 2013 6 functions (can be used with a rotator and grapple) Remote control Load capacity: 5070 kg at 4.4 m reach 3470 kg at 6.3 m reach 2600 kg at 8.2 m reach 2070 kg at 10.2 m reach About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Kdedpfeza E Sqjx Ai Rsr

Condition: used, empty load weight: 5,190 kg, maximum load weight: 35,810 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 03/2019, suspension: air, tire size: 385/55 22,5, wheelbase: 1,310 mm, color: black, Year of construction: 2019, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Application of all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service Kdodpfx Asyy H Emoi Rsr * Transport of utility vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: excellent (used), Swing over bridge: 500mm Swing over table: 800mm Table travel: 1300mm Kdedozqnlgopfx Ai Rjr Grinding depth: 800mm

Condition: used, mileage: 251,000 km, power: 170 kW (231.14 HP), first registration: 03/2001, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: yellow, gearing type: mechanical, emission class: euro3, total length: 9,050 mm, total width: 2,550 mm, total height: 3,300 mm, loading space length: 6,000 mm, loading space width: 2,520 mm, Year of construction: 2001, Equipment: ABS, air conditioning, crane, German vehicle, recently in service, deregistered 06/2026. For many years, it was personally driven by the owner of a small business. It can and does pretty much everything that was feasible in the 12-ton class at the time. TISCHER sliding platform BAVARIA 4000. Platform length: 6.00 m, of which approximately 5.50 m is usable. Platform width: 2.52 m, of which approximately 2.35 m is usable as a flat surface. Platform height in driving condition approximately 1.20 m. Winch: SUPERWINCH H8G, can be moved laterally, all functions controlled by remote control. 3630 kg pulling force. Year of manufacture 2014. Kdodpfxjzfdgpj Ai Ror Tow hitch / towing eye TISCHER for passenger cars. Crane: HMF 1112 T4 from 2001 with 4010 kg lifting capacity at 2.7 m and 970 kg lifting capacity at 9.9 m (complete load chart can be found in the vehicle photos). Accessories: Lifting equipment and heavy "gallows" with hydraulic adjustment cylinder for free-floating load balancing, wheel chocks, wooden planks, shovel/broom. 2 auxiliary start sockets (each for 12 volts and 24 volts). Several plastic storage boxes. Chassis: Mercedes Atego 1223 L. 4760 mm wheelbase. Front leaf and rear air suspension, raise/lower function. Both trailer couplings: Large RINGFEDER pintle hitch with air connections and 16000 kg trailer load capacity for turntables or 13000 kg trailer load capacity for tandem trailers. Ball hitch with a maximum of 3500 kg trailer load capacity. Traction chains can be engaged as an aid for starting in winter (RUD). 6-cylinder in-line diesel engine OM906LA with 231 hp, Euro 3, starts and runs perfectly. 6-speed manual transmission. Fast axle ratio 119 km/h (it is VERY fast). 3 seats. Air conditioning. Radio, CB radio, telephone preparation. Rear view camera with monitor. Hydraulically tilting short cab (S-cab with extended rear wall). Registered as a "truck for vehicle transport". Entry in the registration documents: "The vehicle is suitable as a breakdown assistance vehicle within the meaning of §52(4)No.2 StVZO". Overall vehicle dimensions: Length: 9.05 m, Width 2.55 m, Height 3.30 m. Unladen weight according to vehicle documents 9390 kg, it weighs so much because the truck is extremely robustly built in solid TISCHER quality. Permissible total weight: 11990 kg. Therefore, the payload is 2600 kg. The truck runs very well and it is enjoyable to drive. The chassis is very clean. There is some rust on the cab. The windshield has a small crack at the bottom. The Atego has a valid TÜV (technical inspection) until 02/2027 (according to the registration certificate) and emission test until 08/2026 (according to the inspection sticker on the back of the cab), however, the necessary documents for re-registration are missing, and due to the closure of the last owner's business, it is not possible to obtain these documents as duplicates. The registration documents I and II are of course original and immediately available. There are 2 original Mercedes main keys, both keyed alike for both doors and the ignition lock. Some old documents such as spare parts lists from Tischer and a second remote control for the winch are still available and will be given to the buyer. The Atego was used as a recovery vehicle / tow truck until recently. 2 complete spare wheels as shown are also included. The Atego also has an air horn with chrome trumpets, which sounds very impressive. 2 new batteries were installed in 2026. The 1223 L is immediately available. This

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Kjdeyr Awbjpfx Ai Redr Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, mileage: 12,800 km, power: 110 kW (149.56 HP), first registration: 11/2024, overall weight: 5,600 kg, fuel type: diesel, color: green, gearing type: mechanical, emission class: euro6, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C with Fiedler Winter Package 3L Turbo Diesel 110kW / 150hp Iveco engine, Euro 6, Green * Switchable all-wheel drive * 5-speed manual transmission with reduction gear * Wheelbase: 2450mm, short Kdodozu Ugrepfx Ai Ror * 4-channel ABS, 4-wheel disc brakes, internally ventilated * Mobile hydraulics 03-03 for 2 powered attachments * Rear hydraulics * Swivel function, 2 front * Leak oil line, front * Quick-change system for attachments SWV 500 * Attachment console mounting kit * Ball-head trailer hitch * Repeating indicator lights with work lights * Rear work lights, LED * Suspension seat, driver * Radio, Bluetooth * Power windows * Electrically adjustable and heated mirrors * Tires 285/65 R16C M&S * Reinforced rear axle * Reinforced front axle * Sweeping function * Distance-dependent spreading * 3-way tipping body with front extension * Includes Fiedler Winter Package: Spreader FSS 1100 with Fiedler remote control and parking device, Fiedler snow plow 2m, working width 1.70m * Inspection / Service newly performed, TÜV/emission test newly performed * Includes 12-month used machine warranty via a warranty provider. - Leasing/financing/vehicle rental/trade-in/delivery possible. Further attachments in various designs, new and used, are in stock. More vehicles of the brands Fuso Canter and Multicar, as well as various attachments and add-on equipment, can be found at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Kjdpfszkru Eox Ai Rsdr Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: excellent (used), Year of construction: 2015, 3D CNC image processing measuring machine with touch-trigger probe Measuring range (X × Y × Z): 300 x 200 x 200 mm Scale resolution: 0.1 µm Kdsdpfsxztl Tox Ai Rer Max. table load: 20 kg Image measurement accuracy: EUX,MPE/EUY,MPE = (1.5+3L/1000) µm EUZ,MPE = (1.5+4L/1000) µm EUXY,MPE = (2+4L/1000) µm L: measuring length in mm Optics: programmable zoom changer 1x-2x-6x Illumination: Transmitted light: white LED Coaxial light: white LED PRL: white LED

Condition: used, functionality: fully functional, power: 21 kW (28.55 HP), fuel type: diesel, empty load weight: 3,550 kg, Year of construction: 2003, operating hours: 6,106 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: good Description: Excavator - Crawler excavator - Mini excavator HITACHI EX36UE - 3.55 tons operating weight - Year of manufacture 2003 - 6,106 operating hours - mechanical quick coupler - 2 used trenching buckets 25 + 80 cm - 1 used ditch cleaning bucket 1.40 m - Cab, heating - Work lights front and rear - 3-cylinder ISUZU diesel engine 28 HP - very robust excavator - 3rd control circuit for hydraulic ditch cleaning bucket up to quick coupler is available - good rubber tracks - Hydraulic tilting ditch cleaning bucket available at an extra charge of €1,800 excl. VAT Quick coupler, buckets, Kodpjzlvqysfx Ai Redr 3rd valve, rear work light, front work light, heating, full cab,

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Model: MIRACLE 081507  With RATIONAL-DMIS CAD version 6.9       Measurement range:   X = 800 mm, Y = 1500 mm, Z = 700 mm    Accuracy:   LEADER MIRACLE incl. PH10 head + SP25 – MPEe  SP25 E=2,7+3L/1000 L=mm    Temperature range:  Degrees: 20 – Total temperature variation +/-1°C over 48 hours.  Otherwise according to the technical documentation  Kdjdpfx Aeurf Egsi Rer   Renishaw probe system:  Renishaw PH10M  Renishaw SP25 Body scanning  Renishaw TM-20 “gentle” module incl. 1 pcs. Module  Renishaw SP25-1 incl. 1 pcs. Holder  Renishaw SP35-2 incl. 1 pcs. Holder  Key/probe set – Renishaw M2  Renishaw S3 Plus controller  Calibration ball Ø25.000 incl. Stand  Renishaw Rack for FCR25 incl. 6 pcs. Gates  Incl. Option “Tip changer”  Renishaw Joystick    Rational DMIS for Windows is an interactive graphics software that provides advanced options such as:  User-friendly operating system WIN7 or WIN8  Unique interactive 3D graphic engine import of Iges and Step format  Off-line programming and support of a simulated measuring machine environment  Powerful analytical report generation  Automatic intelligent naming of the measured object  Possibility of connecting a measuring machine to an optional CAD system that uses either IGES, STEP or DMIS  RATIONAL-DMIS CAD option for measuring and analyzing contours and form tolerances 

Condition: excellent (used), functionality: fully functional, machine/vehicle number: V00002513199, input current: 415 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 400 kW (543.85 HP), Equipment: documentation/manual, type plate available, Exact type designation: Kedsrwzr Uopfx Ai Redr VACON0100-3L-0416-7-ED-FLOW+SEBJ+IP54+EMC4+WT03+FL03+DLNL+CIFD+C CET000109+EMAT+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 415A OUTPUT: 3~AC,0-Uin, 0-320Hz, 416A POWER: 400kW:690V / 450HP:600V ° With TEST SEAL! ° Only 13 operating hours - according to the manufacturer over 100,000 possible! ° Easy to use thanks to the integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 3 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: used, Year of construction: 2014, Transnorm curved belt conveyor right bend 45°-800-700 IR1600 RA2435 Kodsxqt R Iepfx Ai Redr Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 1600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, mileage: 7,400 km, power: 110 kW (149.56 HP), first registration: 07/2021, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C Right-Hand Drive Watering System Fiedler 3L Turbo Diesel 110kW / 150HP Iveco Engine Euro 6 Green * Switchable all-wheel drive * 610 operating hours, 7,400 km * 5-speed manual gearbox with reduction * Right-hand drive * Wheelbase: 2450mm short Kdedpfx Aoy N Huyoi Rer * 4-channel ABS, 4-ventilated disc brakes * High-pressure comfort hydraulics * Rear hydraulics * Dual front swiveling * Front leakage oil line * Trailer tipping hydraulics * SWV 500 front attachment quick-change system * Device control console installation kit * Ball-head trailer coupling * Repeater headlamps with working lights * LED working lights rear * Driver air suspension seat * Bluetooth radio * Power windows * Electrically adjustable, heated mirrors * Tires 285/65 R16C M&S * Reinforced rear axle * Reinforced front axle * Surface clearing function * Road-speed dependent spreading * Air conditioning * 3-way tipper body with front wall extension * New TÜV/emissions certification, new inspection/service, workshop tested * 12 months warranty Including Fiedler watering system from 2025 12 months warranty on the base vehicle. Optional Winter Package: Bucher Vario Plough 2m, Husky V13 brine/grit spreader, year 2021 - Leasing / financing / vehicle rental / trade-in / delivery available. Other mounted implements in various versions, new and used, in stock. Further Fuso Canter and Multicar vehicles as well as various superstructures and mounted equipment can be found at: Errors and prior sale excepted. Our General Terms and Conditions apply.

Condition: good (used), Year of construction: 2005, 3 pieces Carton strapping machine, Mosca, RO-TR 700-4, fully automatic - second-hand - : Price per piece ex location: only 3.950.-€ (net)!!! Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 The machines currently work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2,5 A Control voltage: 24V, DC Condition: good Kdedpsq Tr Slefx Ai Rsr Available: immediately Location: Hanau area

Condition: used, Year of construction: 2023, operating hours: 1,500 h, Yanmar B 75 W Year of manufacture: 2023 1500 hours !!!!! POWERTILT !!!!! Full hydraulic quick coupler on the Powertilt 3 buckets Air conditioning German machine, first owner Complete piping/connections for hammer/grab/shear Tires approx. 60-70% Operating weight approx. 7200 kg Ready for immediate use Delivery possible Financing possible ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/p?????/?????... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Kdsdjy Uqftspfx Ai Ror Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: used, first registration: 02/2008, Year of construction: 2008, Schmidt Hagen SP/42/E/13.5-21.5 *3-axle flatbed semi-trailer*steering axles*ALCOA* !!! Very good condition !!! ● ABS ● Air suspension ● Lift/lowering system Kedpfxeyutxzs Ai Rsdr ● Floor height: 1,420 mm ● Alcoa Dura-Bright rims ● 3 x Mercedes axles with disc brakes ● All 3 axles are steerable! ● Tyres: 385/55 R 22.5 ● Tread depth: 3/2 / 5/4 / 5/6 mm ● Gross weight: 42,000 kg ● Unladen weight: 10,200 kg ● Payload: 31,800 kg - German trailer - TÜV / inspection: available new upon request and for an additional charge! Errors and prior sale excepted! = More information = Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: good (used), Year of construction: 2003, Centering roller conveyor, driven, e.g. for strapping machines, Mosca, - used - : Price ex location: only €1,950 (net)!! Pos:C1 Manufacturer: Mosca Type: SRF Year of manufacture: 2003 No.: 72149 Length: approx. 2.01m Roll width: approx. 70cm 3L-N-PE 400V, 1.7A, 1.1kW Control voltage: 24V Condition: good Available: immediately Ksdevx Hllopfx Ai Rjdr Location: Warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Kdodpfxewg S Nks Ai Rer