Used Copying Carousel Camam for sale (739)

Condition: new, Offer new unpacked Xerox Atalink C8145. The system is new and has only 7 copies . We also have other Atalink in stock. Ljdpfxjn Atq Se Ahaeah

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Lajdpfxsltmi Sj Ahajh Price and further information upon request.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Laedpfem Udfwox Ahash Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer Lajdpfx Ajb Uhrnohajh -for rounding edges on the front and rear edge of the workpiece and on top -each 2x corner copying units -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 650/4500/H700 mm -Weight: 86 kg

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -1x motor: 0.6 kW 18,000 rpm at 300 Hz -Voltage: 165 volts -Shaft holder: Ø 16 mm -Tool: Ø 70 x 20 mm Lasdpfx Asca A Hvshajh -with: copy unit -with: quick change holder -Number: 3x spindle motors available -Price: per piece -Dimensions: 310/175/H250 mm -Weight: 6.5 kg

Condition: used, Copy head, copy head, copy device, copy lathe -Copy head for: lathe Lodpsdl Smhsfx Ahasah -without: hydraulic unit -Dimensions: 1100/170/H370 mm -Weight: 143 kg

Condition: new, Year of construction: 2026, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers Lodpfx Ahsdt Ap Asaeah - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: good (used), Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm Ledpfx Ahjb A I Hdoaoah -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 3130055185, with Freeflow Printserver and Clear Toner Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour Lsdpfx Ajh Nvm Dohaoah • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum Print Image Assurance: 12.48" x 19.05" (317 mm x 484 mm) Machine can staple, punch, fold & front cut Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Various spare materials: Contains 1 bottle Blaue, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Tonner Bottle 2x Tonner Waste Container 10x Cartridge M 006R01472 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assembly 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Lsdpeia Naqjfx Ahajah Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm CE marked Technical specifications subject to change

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Lsdpfxji Hn Sro Ahajah Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Lodpfsgbug Nsx Ahasah Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Lsdpfxod Nt N He Ahaoah Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) Laedpfx Ahsu I N Npeajh - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, mileage: 520,000 km, power: 355 kW (482.67 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF 480 FT 4x2 tractor unit with Grandner Denver Drum D9000 silo compressor, Euro 6, retarder, Super Space Cap cab with two sleeping berths, roof side spoiler, automatic transmission, power take-off, leaf air suspension, ACC adaptive cruise control, LDWS lane departure warning, collision warning, TPMS tire sensors, auxiliary air conditioning, auxiliary heating: seat ventilation/seat heating, xenon headlights, radio/AUX, single-door hatchback First owner Test book Ledpfx Ahoxb Inveaoah Multiple copies available 6 copies available

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Lsdpfozy Ik Iex Ahaoah Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) Lajdpfx Ahjz Abppoaeh > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Weight 2800 kg

Condition: used, Year of construction: 2014, Edge banding machine Manufacturer: Holzher Type: Streamer 1067 Year of manufacture: 2014 Technical specifications Feed rate: 10 m/min Workpiece thickness: 8-45 mm Edge thickness: 0.4-3 mm Joint milling Cutting unit Multi-function milling unit Corner copying Finishing unit Note: Laodpfxjz E Rn Rs Ahaoh The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: as good as new (ex-display), Year of construction: 2026, OTT Pacific+ with special paint finish Equipment: Riepe transmission Gluing, laminating (PUR/EVA), pressure zone, edge trimming for increased edge overhang Capping with 2 motors, flush trimming at the top/bottom, radius trimming R2, corner copying AKF fully equipped with optional multi-tool, NC radius draw blade R2/R1, surface draw blades 2-point, RS special unit with Riepe spray nozzles. Suitable for solid wood up to 15mm thick Feed rate from the roll: 18 m/min, including profile milling Laodpez D Uwmjfx Ahaoh Machine weight approx. 3000 kg Return possible.

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port Lajdpfx Aeu Ibhwehaoh  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: used, Double gantry-type machining center with two independent operating heads working on independent tables. • Year of manufacture: 2012 • Number and type of spindles / Machining heads: Two independent, liquid-cooled 5-axis heads (typically 2+2 compact electrospindles per head) operating up to 24,000 RPM. • Installed power / Electricity: 50 kW / 380 V / 50 Hz • Air consumption: Standard operating requirements for Bacci multi-axis pneumatic clamping and extraction circuits (typically a nominal pressure of 6 to 7 bar). • Machine weight: Approx. 6,000 kg • CNC / Control system: Industrial OSAI CNC system with high-speed servo drives. • Software included: Complete, featuring PITAGORA 3D optimization and simulation software for dynamic workload balancing. Ledpfxszmhz Ho Ahaeah • Material handling integration: Fully integrated automatic hopper feeder system for synchronized loading and unloading of workpieces. • Data and system backups (critical advantage): For a seamless commissioning and startup, we include: o Complete copies of all parameter files for servopacks and inverters/frequency drives. o Full copies of the OSAI system BIOS and hard drive clones. o Backups on dedicated PCs containing Pitagora configurations. o Complete original documentation, both in physical and digital formats.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots Ljdpfxet Tw S Uj Ahaoah BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Laedpfx Ast Txfpohash Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Lajdpfx Asvlnvrohash

Condition: used, Year of construction: 2002, machine/vehicle number: CA83, Used ROBINO & GALANDRINO monostadio z 8 t capsuling machine- Year 2002Technical Specifications & Performance DataThis Single-stage Capsuling Machine Z 8 T by Robino & Galandrino is a robust solution for capsule application on glass bottles, engineered for wine and sparkling wine producers seeking reliable performance in a second hand, used bottling line environment. Built with Italian precision, it offers consistent capsuling quality and seamless integration into industrial packaging and beverage production workflows.Manufacturer: Robino & GalandrinoModel: Z 8 T (Monostadio)Year: 2002Configuration: Single-stage capsulingNo. of heads: 8Capsule types: PVC shrinkable plastic; Champagne/sparkling wineRotation direction: CounterclockwiseOptical centering: Not equippedContainers: Glass bottlesCompliance: CE markedAdvanced Automation & Control SystemsDesigned for dependable operation within professional bottling equipment setups, this capsuling machine supports stable, repeatable processes. Its single-stage architecture simplifies adjustments and minimizes changeover time. Operator functions are straightforward, ensuring efficient routine operations. Standard machine protections and CE conformity support safe use on modern production floors.Streamlined controls for routine start/stop and adjustmentsQuick changeovers aligned with single-stage designMechanical alignment without optical centering for robust, low-maintenance operationSafety guarding consistent with CE conformityProduction Line Integration CapabilitiesThe Z 8 T integrates easily as a standalone station or inline within a complete used bottling line. It accepts upstream glass bottle handling and passes consistently capped bottles downstream to labeling or inspection modules, supporting flexible industrial packaging layouts.Inline or standalone operationCompatible with standard glass wine bottle handling conveyorsSuitable for integration after corking/capping and before labelingCapsule application for both PVC shrink and sparkling wine formatsMachine Condition & Maintenance HistoryThis machine is currently in storage, making it available for rapid deployment into beverage production environments after routine commissioning. The overall configuration, CE conformity, and preserved components provide a solid foundation for reliable second hand operation.Current status: In storageCE marked unitSingle-stage, 8-head layout preservedOperational Performance & VersatilityOptimized for wine sector applications, the Z 8 T manages both PVC shrink capsules and champagne/sparkling wine formats. Its counterclockwise carousel and 8-head configuration deliver balanced throughput for small to mid-scale wineries and beverage producers.Ideal for Wine and sparkling wine productionConsistent application of PVC sh... Lasdpsz E Dhwsfx Ahaoh