Used Cordes Mc200.501 for sale (158)

Year of construction: 1999, condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: up to approx. 950 mm, see photos -Load capacity: kg -Dimension: 1320/600/H1300 mm -Own weight: 88 kg Nlodpfx Aslyvdgjkueb

Condition: used, Thermoplastic polyurethane elastomers, piping core, piping insert, piping cord -Eder core; 2 roles -Total length: 1430 m Nljdpfx Ajgabyvokusb -Diameter: 3mm -Price: complete -Dimension box: 350/325/H340 mm -Weight: 7.7 kg

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Nlodjcvkalepfx Akujb Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, machine/vehicle number: 8c9a877b63be8509f58298a74, empty load weight: 7,170 kg, maximum load weight: 25,830 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2007, tire size: 455/40 r22,5, Further information Nljdpfxsi Ri Aks Akusb 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE! Air suspension with lifting and lowering, BPW disc brake axles, 2-speed gearbox door winches with thrust compensation, 1 plastic storage box, sliding roof, side tarpaulin, 2-leaf portal doors, spare wheel holder without wheel, hazardous goods plate, A-plate, document roll, customs cord, 4 rows of aluminum slats, coil trough approx. 7,000 mm long, 2 bumpers at the rear, warning signs according to ECE-070, tyres approx. 30 - 40 % 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE! - 2 VEHICLES AVAILABLE!

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Njdpfx Akjh Ha Ipouslb Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel Nlsdpfx Aet Nfarekuob • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: like new (used), - Two feed speeds - Pneumatic pressure on the feed roller Nedpfxovzyg Us Akuolb - Maximum cutting width: 210 mm - Main motor power: 13 kW - Maximum cutting height: 500 mm - Year of production: 2001 - Safety pull cord

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 Njdpfx Ajxfvahjkujlb 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: used, Year of construction: 2006, functionality: fully functional, The 4P Blue Cord Folder is the ideal solution for food manufacturers looking to automate and optimize their blue cord production. Thanks to its four lanes, this machine guarantees increased productivity while ensuring precise, consistent product handling. In fact, it is designed to meet the needs of both coating and breading lines, ensuring optimum efficiency in blue-cord processing. What's more, its simple operation enables seamless integration into existing production lines. Furthermore, this folding machine, manufactured by SAS NIJAL in 2006, stands out for its robustness and reliability, even as a second-hand machine. With its ability to handle several products simultaneously, it saves considerable time while maintaining consistent quality of finished products. Last but not least, the 4P Folder helps reduce production costs by limiting manual intervention, while increasing the overall output of the production line. Nsdpfeu E Radex Akujlb In short, the 4P Blue Cord Folder is an indispensable tool for food processors wishing to combine performance and efficiency, while guaranteeing a high-quality product. Technical specifications: 4-track folder Manufacturer: SAS NIJAL SAS NIJAL Date of manufacture: 2006 Accompanied by coating / breading lines

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages Nlsdpfx Asdx R Tfokujb - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons Nlodpfx Ajxgbxfekujb - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Year of construction: 2010, operating hours: 7,300 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Njdpfxjh Ty Acj Akujlb Base machine CAT 312 Engine 67 kW Rotary head BT 60 / 60 kNm Kelly K 298 4/15m Pull power cord winch 100 kN pull power main winch 100 kN Overall weight 26200 kg LOW HEAD room machine!

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, ✅ Used & in stock ✅ Up to 150mm branch thickness ✅ Shipping available Powerful wood chipper in top condition for sale! The device is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22h Year of manufacture: 2025 SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc gasoline engine with 12.4 HP -- Self-feeding, no need to push -- 360° discharge -- With drawbar -- Highly user-friendly -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL ENGINE Equipped with a 420 cc gasoline engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is conveniently started via an electric starter or pull cord. The engine's power is transmitted to the centrifugal clutch via the V-belt, ensuring consistently powerful power output. The engine also features a low-oil sensor that shuts down the engine if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our chipper enables efficient and versatile processing of suitable wood stocks. The large hopper opening ensures optimal and convenient material feeding. High-quality workmanship and the use of durable materials ensure a long service life of the chipper, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at speeds of up to 2000 revolutions per minute, ensuring fast and efficient chipping of the material and reducing working time. The blades are made of high-strength steel and specifically designed for the chipper's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly, allowing maintenance to be performed quickly and easily, minimizing both operating costs and downtime. Nlsdpfx Akowh Rnbsueb HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be easily moved and positioned on your property, making handling, transport, and storage much easier. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model number: RR150THX Drive type: V-belt 17x1255La Max. branch thickness: 150mm Chopping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Weight: 255kg Basic dimensions Overall length: 2700mm Overall width: 1218mm Overall height: 1424mm Discharge angle: 360º Engine Displacement: 420cc Maximum power: 9.1kW / 12.4hp Starter: Recoil starter Our competent team is happy to answer any questions you may have about the SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR100THX. We look forward to hearing from you and providing advice. Is the purchase price of a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing options, please feel free to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ New & In Stock ✅ Ideal for Tall Grass & Large Meadows ✅ Shipping Available SCHORR FLAIL MOWER RR600HM HIGH GRASS MOWER 8HP 252CC MULCHER - Effortlessly mows tall grass and dense scrub - Powerful 252 cc 4-stroke engine (8 HP) – strong & reliable, even in thick vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made of hardened steel – efficient mulching of material up to 2.5 cm diameter - Robust 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Cutting height infinitely adjustable (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – even on slopes or uneven ground FEATURES / SPECIFICATIONS Whether it’s tall grass, dense brush, or woody growth: this flail mower gets the job done reliably and consistently. The SCHORR RR600HM is built for tough tasks – equipped with a powerful Loncin 4-stroke petrol engine (252 cc) delivering a solid 8 HP. At its core is a 4-speed gearbox (3 forward / 1 reverse), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel mounted on a sturdy rotor, the RR600HM provides uniform and fine mulching. Whether on meadows, orchards, field margins, or fallow land – even branches up to 2.5 cm in diameter are processed with ease. Its 600 mm cutting width enables productive work while maintaining high maneuverability. The cutting height can be adjusted tool-free using the handwheel (20–80 mm), allowing flexible response to terrain and vegetation. The RR600HM is designed for intensive applications – be it overgrown gardens, large green areas, or agricultural environments. The robust construction, deep-tread drive wheels, and self-propulsion ensure confident traction – including on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably managed with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscape contractors. For those seeking more than just a lawn mower, this machine provides real power at a fair price. Technical Data Manufacturer (abbreviation): SCHORR Manufacturer model: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flail Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Overall length: 1790mm Nodowtqdmspfx Akujlb Overall width: 730mm Overall height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke (OHV) engine Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (RON min. 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity: approx. 5L Engine oil capacity: approx. 1.1L Our knowledgeable team is happy to answer any questions you may have about the SCHORR RR600HM Flail Mower for High Grass. You can reach us by phone or email. We look forward to hearing from you and assisting with your inquiry. Find the initial investment for a flail mower too high? No problem, we also have some used machines in stock. Feel free to contact us.

Condition: used, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ Like new & in stock ✅ Ideal for tall grass & large meadows ✅ Shipping available SCHORR FLAIL MOWER RR600HM HEAVY-DUTY BRUSHCUTTER 8HP 252CC MULCHER - Effortlessly cuts tall grass and dense undergrowth - Powerful 252 cm³ 4-stroke engine (8 HP) – robust & reliable even in tough vegetation Njdpfx Akjwufhcsuslb - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made from hardened steel – efficient shredding of material up to 2.5 cm in diameter - Rugged 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Adjustable cutting height (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – also suitable for slopes and uneven ground FEATURES / SPECIFICATIONS Whether tall grass, dense brush, or woody growth: this flail mower completes the job reliably and with endurance. The SCHORR RR600HM is built for challenges – equipped with a robust Loncin 4-stroke petrol engine (252 cm³), delivering a full 8 HP. Its core is a 4-speed gearbox (3 forward / 1 reverse gear), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel on a heavy-duty rotor, the RR600HM provides consistent and fine mulching. On meadows, orchards, field edges or fallow land – even tree cuttings of up to 2.5 cm in diameter are processed effortlessly. The 600 mm cutting width allows for efficient work and excellent maneuverability. Cutting height can be adjusted tool-free using a hand wheel (20–80 mm), so you can quickly adapt to any terrain and vegetation. The RR600HM is designed for intensive use – whether it’s overgrown gardens, large grass areas or agricultural settings. The heavy-duty build, coarse-profile traction wheels, and self-propelled drive system guarantee controlled handling – even on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably maintained with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscapers. For anyone who wants more than just lawn mowing, this is a true powerhouse at a fair price. Technical Data Manufacturer (short): SCHORR Model code: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flails Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Total length: 1790mm Total width: 730mm Total height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke engine (OHV) Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (min. RON 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity approx.: 5L Engine oil capacity approx.: 1.1L Our knowledgeable team is happy to assist you with any questions regarding the SCHORR RR600HM Flail Mower. You can reach us by phone or email. We look forward to hearing from you and providing expert advice. Are the acquisition costs for a flail mower too high for you? No problem – we often have used machines in stock. Feel free to contact us.

Condition: used, functionality: fully functional, Year of construction: 2025, SCHORR Trencher RR600GF, 12.4 HP, 420cc Electric Start, Shaft Cutter Powerful shredder in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 The RR600GF trencher is your reliable partner for demanding ground work. Equipped with a powerful 420cc four-stroke engine delivering an impressive 12.4 HP, the machine effortlessly tackles even the hardest soil types. Thanks to the 27 robust carbide cutter teeth and the constant power delivery from the centrifugal clutch, you'll always work efficiently and precisely. It's conveniently started using the electric starter. SCHORR Trencher RR600GF – Discover the advantages: -- 420cc 12.4hp gasoline engine with electric starter -- 60cm continuously variable trenching depth -- 60m/h trenching performance -- 27 carbide teeth -- With parking brake -- Highly user-friendly -- Super compact design – easy to store and transport -- Extremely robust and reliable Technical specifications Nlodpfxjwh Rn Ue Akueb Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR600GF Starter: Recoil starter (pull-cord) + electric starter Number of trenching teeth: 27 Max. trenching depth: 600mm Max. trenching speed: 60m/h Weight: 188kg Basic dimensions Overall length: 2143mm Overall width: 904mm Overall height: 1233mm Handle width: 623mm Engine Max. power: 9.4kW / 12.4hp Displacement: 420cc Fuel type: Gasoline *Further technical specifications are available upon request. With ergonomically designed controls and intuitive steering, the trencher is easy to operate. Thanks to the two tubeless main wheels, the trencher can be easily transported to its destination. The trencher features a locking wheel system to prevent them from accidentally rolling away during operation. The trencher is an essential tool for construction projects that require precision and efficiency. With its ability to quickly and precisely dig trenches in various soil types, it offers tremendous time savings compared to traditional methods such as shovels or excavators. Using a trencher not only allows projects to be completed faster, but also with fewer personnel and lower operating costs. The machine is ideal for laying cables, pipes, and irrigation systems, as it creates clean, even trenches and minimizes soil excavation. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to assist you with your consultation.

Year of construction: 2005, condition: used, stable hose reel for tough and extremely challenging applications stable durable and extremely corrosion-resistant for air, water (oil and grease) diameter of hose connection 12.5 mm (1/2 ") hose length max. 20 m possible open version housing made of cast aluminium, lacquered in space-blue  hose drum ball bearing mounted made of cast aluminium, lacquered in space-blue  can be mounted either on wall, floor or ceiling safety lock for hose drum drum bearing encapsulated Nsdoh A Sflepfx Akuolb drum locking mechanism sixfold rotary transmission made of brass oder brass / stainless steel  hose stop included in scope of delivery  hose outlet via 6 rolls, steplessly adjustable spring drive encapsulated max. pressure: 1.5 MPa (15 bar) hose connections: sppit with hose clamp with rubber hose, cord reinforced temperature max. 80° C space requirements depth - 760 x height - 560 x width - 320 mm weight approx.  32 kg original price approx. ? 1,600.00  - 9 units on stock -

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Nsdpfx Asc Ipckjkuslb Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot Nsdpfxsx E Aywo Akujlb - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt Nledpfxexc Rmko Akueb - Availability: by arrangement - Location: Flörsheim

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Njdpfx Aoxwp S Iokuslb Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Nlsdpfew I U Ecox Akueb Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Year of construction: 2025, condition: new, functionality: fully functional, POTATO KNIFE PEELING LINE 500KG/H: ROOT PEELER RP800 The Vegetable & Root Washer/Polisher is designed for effective cleaning and optional peeling of root vegetables like potatoes, carrots, and ginger. With durable soft or hard brushes, it can polish or peel raw produce efficiently. The machine features a sleek, rust-resistant stainless-steel design, high cleaning volume, low energy consumption, and user-friendly, continuous operation. Its long-lasting nylon cord brush rollers ensure durability and wear resistance. CONVEYOR AND KNIFE PEELING MACHINE CKP500 The Potato Washing and Peeling Machine with Washing Elevator is designed to streamline potato processing in production lines. The washing elevator lifts and soaks the potatoes, softening and cleaning the surface soil. Once ready, it automatically feeds them into the peeler, where the potatoes are efficiently washed and peeled. This automated process ensures continuous operation, reduces manual work, and prepares potatoes quickly for the next stage of production. Nodpfjx Ex Dlex Akuslb Soaking Elevator SO2400-S The Prewashing Machine SO2400-S with Elevator is a durable, industrial solution for efficiently pre-cleaning root vegetables like potatoes. It streamlines the first washing stage and uses an integrated elevator to automatically transfer cleaned potatoes to the next step, saving time, reducing handling, and minimizing the risk of bruising or contamination. SORTING CONVEYOR VST2700 The sorting and conveying machine handles materials after cutting and peeling, with two-sided stations for manual inspection. Workers can remove any pieces with unclean skin for reprocessing. Built from durable 304 stainless steel, it resists impact and corrosion, and its adjustable speed allows the conveyor to be tailored for different materials.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, Beveling Grooving Machine for Expansion Joints in Concrete Floors and Channel Cutting in Concrete. On 4 wheels +2, includes 125 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 30 mm) and adjustable handle angle. Front and rear guides enter the cut to ensure straight milling and allow for angle and width adjustment. Extensive handle tilt adjustment. Supplied with 125 mm cutter. Nsdpfjwuvm Asx Akujlb - Net price: 4,100.00 PLN (EUR 976) - Please send inquiries preferably by email. Beveling Grooving Machine for Expansion Joints in Concrete Floors, on 4 wheels +2, includes 180 mm milling cutter - Four-wheel design. Compatible with vacuum extractors. Fully galvanized construction, stainless steel cover. Vacuum port included. - Enables precise chamfering of expansion joint cuts. Equipped with a robust, professional-grade motor. Large depth adjustment range (up to 40 mm); adjustable handle angle. Front and rear guides enter the cut ensuring straight operation during chamfering, allowing angle and width adjustment. Extensive handle tilt adjustment. Supplied with 180 mm cutter. - Net price: 4,800.00 PLN (EUR 1,143) Net Prices: - Expansion joint cleaning tool (without grinder) – 900.00 PLN (EUR 214) - Milling/Cleaning machine (dual function) for expansion joints – 3,250.00 PLN (EUR 774) - As above, galvanized and powder coated – 3,400.00 PLN (EUR 810) - As above, with handle-mounted switch – 4,200.00 PLN (EUR 1,000) - As above, with additional powder coating – 4,350.00 PLN (EUR 1,036) - Concrete milling machine on 4 wheels (includes 125mm "V" cutter) – 4,100.00 PLN (EUR 976) - Milling machine on 4+2 wheels, for deep milling up to 30mm, includes 125mm "V" cutter – 4,200.00 PLN (EUR 1,000) - Milling machine on 4+2 wheels, for deep milling up to 40mm (includes 180mm "V" cutter) – 4,800.00 PLN (EUR 1,143) - Spare 125mm "V" cutter – 290.00 PLN (EUR 69) - Spare 180mm "V" cutter – 540.00 PLN (EUR 129) - 200mm cutter – 440.00 PLN (EUR 105) - Expansion joint cord installer, 8-10mm – 370.00 PLN (EUR 88) - Expansion joint cord installer, 10mm-12mm – 390.00 PLN (EUR 93) - Expansion joint cord installer, >12mm – 420.00 PLN (EUR 100) - Side cord installer (for wall work) – 390.00 PLN (EUR 93) All items available from stock. Manufacturers of concrete milling machines for 125 and 180 mm cutters, specialized for chamfering expansion joint cuts, widening cracks in damaged concrete floors, and cutting channels in concrete flooring (suitable for underfloor heating installation). We operate 7/24. Shipping available on a cash-on-delivery or prepayment basis, or collection in Poznań. Please contact us by email.

Year of construction: 2025, condition: new, Handheld trowels for finishing concrete floors are practical tools designed for smoothing concrete in hard-to-reach areas. We manufacture two versions – single-speed and two-speed. Available in 230V corded and battery-powered models. Also ideal for terrazzo grinding on stairs. We have been manufacturing trowels for over 25 years. Currently, we produce 11 types of trowels – both 230V electric and battery-powered variants. Having completed thousands of square meters of flooring ourselves, we understand the needs of flooring contractors and know what can make their tough job easier. We value user feedback and implement changes promptly. For inquiries, we recommend contacting us via e-mail. Our manufacturing utilizes the Kaizen methodology. Kaizen, meaning “change for the better” (in Japanese: “kai” – change, “zen” – for the better), is a philosophy and management method that emphasizes continuous improvement of company processes and activities. It involves systematic introduction of small but regular changes, leading to gradual yet lasting improvements. As a result, our products are durable and user-friendly. Our trowels can be used with disks for smoothing concrete, blade crosses with metal or plastic blades for finishing, diamond or corundum abrasives for grinding, bush hammering, cleaning old concrete with brushes, and even restoring surfaces to a like-new condition. They are also suitable for grinding terrazzo stairs and floors. Additionally, we manufacture special universal plates, to which many of our tools can be attached. Products are shipped cash-on-delivery or upon prepayment, or can be collected in Poznań. Our trowel disks are made exclusively from 3 mm premium-grade black or stainless steel. Net Prices: Two-speed handheld battery-powered trowel (Vander) + electronic speed control – 1450.00 PLN Handheld battery-powered trowel with continuous speed regulation, complete set – 920.00 PLN NAC trowel, lightweight, two speeds + electronic gear shift, includes small disk – 3350.00 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1200W, includes small disk – 1100 PLN Handheld trowel Hikoki, 2 speeds (150–650 rpm) + electronic speed adjustment, 1600W, includes small disk – 1250 PLN Handheld trowel NAC (USA), 2 speeds (180–400; 300–700 rpm) + electronic speed adjustment, 1800W, includes small disk – 1250 PLN Nlsdpfjwt Ix Iex Akuob Single-speed handheld trowel with small disk – 790.00 PLN Single-speed handheld trowel with small disk, 0–970 rpm, 2800W – 830.00 PLN Handheld vibrating trowel for concrete and plaster. Vibrating plate 20x28 cm. Power 370W/2840 vibrations – 750 PLN Lightweight handheld battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3350.00 PLN Lightweight single-speed battery-powered trowel with continuous speed regulation – 2900.00 PLN.