Used Correa L30/74 for sale (1,742)

Condition: ready for operation (used), Siemens carbon brush holder for 1HU3074-0AC01 servo motor with terminal box, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhsdpfxjzf T D De Ammoh

Condition: ready for operation (used), Siemens rotor for 1HU3074 servo motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhsdszf T D Rspfx Ammoh

Condition: ready for operation (used), Siemens stator for 1HU3074-0AC01 servo motor, serial number: EDN95831502005, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lhsdpezf T Ebsfx Ammoh

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677401002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfx Aozfyr Ijmmohh

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Permanent Magnet Motor, Serial No.: E8H61677411020, with 1FU1050-65BF 13.3 mVmin Tachometer - Z = K93 (housing IP67), used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfozfyr Ujx Ammehh

Condition: ready for operation (used), Siemens 1PH6137-4CZ09 - Z spindle motor, serial number: EOT86310701006, with 2CW8366-8 fan, encoder ROD 323 1024 IMP/U, and external terminal box - Z = G51 (prepared for encoder system), H40, K00 (simple bearing for coupling or planetary gearbox), K02 (vibration level - level S with simple bearing), K31 (2nd nameplate) and N01, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Lhedpfozfytlox Ammeh NOTE: Please request the costs for packaging and shipping separately!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, resolution (max.): 600 dpi, paper weight (min.): 80 g/m², year of last overhaul: 2026, For sale is an Océ Variostream 7450 digital printing machine, manufactured in 2012. The machine is ready for operation, fully functional, and can be inspected while powered on, by arrangement. Lsdpfx Ajzgbzasmmjhh The last overhaul was carried out in 2026.

Condition: used, mileage: 1,113,142 km, power: 330 kW (448.67 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 13,320 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: Mercedes Benz - Type/Model: Actros 2745 6x2 - First registration: 29.06.2015 - Mileage: 1,113,142 km - Number of axles: 3 - Emission class: Euro6 - Cab: M - Transmission: Automatic - Retarder: Yes - Suspension: Air - Lift axle - Steering axle - Brakes: Disc - Length: 9,640 mm - Width: 2,550 mm - Height: 3,360 mm - Curb weight: 13,320 kg Lodpfxjxq Ep Ao Ammjhh

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. Lhodewnm U Ropfx Ammoh From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 11,500 kg, total width: 5,300 mm, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 3030 was manufactured in 2006. It features a working range of 3000 mm in the X direction and 1500 mm in the Y direction, with a maximum positioning speed of 60 m/min. The machine is equipped with a TRUMPF CNC path control based on Siemens SINUMERIK 840D. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 3030 CO2 laser cutting machine we have for sale. Contact us for further details. • Max. positioning speed: 60 m/min (parallel to axes); 85 m/min (simultaneous) • Drive type: Maintenance-free three-phase AC servomotors on X, Y, Z • CNC control: TRUMPF CNC path control based on Siemens SINUMERIK 840D • Minimum programmable travel step: 0.01 mm • Positioning accuracy: ±0.1 mm • Average position dispersion: ±0.03 mm • Compressed air consumption: • With TLF 2000–3200: 31 m³/h (516 l/min) • With TLF 4000: 42 m³/h (700 l/min) • Laser power options (cw) and max. structural steel thickness: • TLF 2000: 2000 W / 12 mm Ljdpfx Amozf H Aasmjhh • TLF 2700: 2700 W / 15 mm • TLF 3200: 3200 W / 20 mm • TLF 4000: 4000 W / 20 mm • Electrical connection and fuses (50 Hz / 400 V): • TLF 2000: 63 kVA / 100 A • TLF 2700: 71 kVA / 125 A • TLF 3200: 73 kVA / 125 A • TLF 4000: 88 kVA / 160 A Additional equipment • Dust extractor • Control cabinet • HF generator • Cooling unit

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe 2 axes (X, Z) Model: SL-300B Year: 1998 Lodpfx Amjzd R Ikomshh CNC: Fanuc MSC-501 3-phase power Chip conveyor Documentation

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2450678, load capacity: 350 kg, mast type: telescopic, lifting height: 11,800 mm, platform length: 2,190 mm, platform width: 1,060 mm, overall weight: 2,985 kg, transport length: 2,400 mm, transport width: 1,190 mm, transport height: 2,210 mm, fuel type: electric, tire size: 16x5x12, color: red, Equipment: all wheel drive, Technical Data Year of manufacture: 2017 Lhodpfxjyqy T Do Ammoh Engine: Electric Working height: 13.80 m Platform height: 11.80 m Platform extension: 0.90 m Platform dimensions (LxW): 2.19 x 1.06 m Overall dimensions (LxWxH): 2.40 x 1.06 x 2.48 m Weight: 2,985 kg Load capacity: 350 kg Driving speed: 1.0 - 3.2 km/h Climbing ability: 25% Tyre type: Solid rubber Fully operational, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2450658, load capacity: 350 kg, mast type: telescopic, lifting height: 11,800 mm, platform length: 2,190 mm, platform width: 1,060 mm, overall weight: 2,985 kg, transport length: 2,400 mm, transport width: 1,190 mm, transport height: 2,210 mm, fuel type: electric, tire size: 16x5x12, color: red, Equipment: all wheel drive, Technical Data Year of manufacture: 2017 Engine: Electric Working height: 13.80 m Platform height: 11.80 m Platform extension: 0.90 m Platform dimensions (LxW): 2.19 x 1.06 m Overall dimensions (LxWxH): 2.40 x 1.06 x 2.48 m Weight: 2,985 kg Load capacity: 350 kg Driving speed: 1.0 - 3.2 km/h Climbing ability: 25% Lhedpfx Aeyyl A Remmjh Tyre type: Solid rubber Fully operational, general signs of use

Condition: used, mileage: 174,000 km, power: 302 kW (410.61 HP), first registration: 07/2014, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, crane, electric window regulation, power assisted steering, power mirror, trailer coupling, = Additional options and accessories = - Air suspension - Disc brakes - Gullet - Immobilizer - Lift Axle - PTO - Radio - Sleeping cabin - Toolbox = Remarks = Crane Number of hydraulic extensions: 4 Number of support legs: 2 Remote control: ✓ Volvo FM 410, 2014, 174,000 km! Euro 6, 6x2, I-Shift, Palfinger PK 10002, 4x Hydraulically extendable, Radio controlled = More information = Front axle: Steering Rear axle 1: Double wheels Crane: Palfinger PK 10002 = Dealer information = Bank data: Lhodpfx Aoy Idxaemmoh Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), mileage: 742,717 km, power: 250 kW (339.91 HP), first registration: 07/2014, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,990 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, soot filter, spoiler, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: Volvo i Shift, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Volvo Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.251 kg Carrying capacity: 11.749 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest Lsdpfx Aszd Hr Sjmmshh - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox - Visor - Webasto

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 16,100 kg, overall weight: 24,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 11,625 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 jacking plates with holder Splash guards at the rear over the entire width Preparation for widening to 3,000 mm (holes in the outer frame and not in the rear slope) Tie-down eyes, low loader 1 pair of tie-down recesses embedded in the front longitudinal member on the extension, 10 tons each 7 pairs of tie-down studs embedded in the top and sides of the outer frame, 10 tons each 1 x at the front on the extension 5 x in the low bed 1 x in the rear slope 12 pairs of tie-down holes in the outer frame, 5 tons each (for securing tie-down straps) 5 x on the extension, 6 x in the low bed and 1 x in the rear slope Coupling device, trailer turntable Tow hitch with tested 40 mm drawbar eye Lhjdpfoi Ri Agjx Ammoh Axles + Suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Braking system 2-circuit compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Connecting lines extended by approx. 60 cm Without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, side reflectors 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of illuminated and extendable warning signs to 3,000 mm Floor Front extension with steel/non-slip sheet covering Storage box embedded in the ramp to the extension Followed by 70 mm soft wood floor, steel/non-slip sheet covering in the wheel arch area Rear slope with 70 mm soft wood floor Low loader bed incl. rear slope 5900 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-loaded support Operating instructions With 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the cargo, the total weight may not be achieved while complying with the permissible axle/support and drawbar loads. (Poor driving and handling behavior possible due to incorrect load distribution) Registration country / signs Registration country: Germany With Dekra approval and report, for max. 60 km/h approval, towing vehicle LoF (registration country Switzerland max. 40 km/h possible) Prepared for license plate holder, two lines Without contour marking / reflective strips according to ECE R 048 Painting Frame DB 7350 Novagrau 10 years warranty against rust perforation Tow hitch galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images!

Condition: excellent (used), Kuka Robot Here, we offer a Kuka robot for sale. (As new/unused) Kuka robot KR 60L30-3 Arm length: 1220 mm Number of axes: 6 Weight: 665 kg Axis 1 (A1) ± 150˚: 128˚/s Axis 2 (A2) +75˚/-105˚: 102˚/s Axis 3 (A3) +158˚/-120˚: 128˚/s Axis 4 (A4) ±350˚: 260˚/s Axis 5 (A5) ±119˚: 245˚/s Axis 6 (A6) ±350˚: 322˚/s With sealed software Rated payload: 30 kg Controller: KRC4 Lhsdpfx Amjzd Uc Esmeh Type: KR 60 L30-3 Scope of delivery: (See pictures) We are happy to answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece width (max.): 900 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 700 kg, total height: 2,519 mm, total length: 3,404 mm, total width: 2,450 mm, table width: 900 mm, table length: 500 mm, table load: 700 kg, overall weight: 7,300 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,265 h, spindle nose: SK40, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, Additional options & accessories: - Heidenhain electronic handwheel. Ljdpfx Aozdr R Hommohh - Heidenhain TS460 3D probe. - Approximately 30 tool holders. - Original HEMRLE & Heidenhain documentation. - Swivel lever for swiveling the milling head. - No chip conveyor present!

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system Ljdpfx Amey A Ewmomshh New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power.

Condition: good (used), mileage: 153,273 km, power: 107 kW (145.48 HP), first registration: 08/2012, fuel type: diesel, wheelbase: 3,680 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, total length: 4,400 mm, total width: 2,200 mm, total height: 2,000 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2012, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Armrest - Exterior mirrors with turn signal indicators - Becker holder - Co-driver's bench seat - Tachometer - Driver's seat height adjustment - Remote central locking - Tinted glass - Cabin - Trunk lid - Radio/CD player - Headlight height adjustment - Tachograph = Additional Information = General Information Number of doors: 2 Cabin: single Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1,850 kg Maximum rear axle load: 2,800 kg Weights Unladen weight: 2,020 kg Payload: 1,480 kg GVW: 3,500 kg Functional Tail lift: Anteo, tailgate, 1,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 10.2026 Technical condition: good Optical condition: good Lhedjzdllqopfx Ammoh = Company Information = Nidro cars Holland is located in the center of the country and is the right place to buy your car, van or truck. The stated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Lsdpfszdq Rljx Ammehh -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg

Condition: good (used), mileage: 574,372 km, power: 310 kW (421.48 HP), first registration: 06/2021, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,460 mm, total width: 2,500 mm, total height: 3,800 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, power mirror, soot filter, General information Number of doors: 2 Cab: Streamspace Technical information Number of cylinders: 6 Engine capacity: 12.809 cc Transmission Transmission: Mercedes-Benz, 12 gears, Automatic Axle configuration Make axles: Mercedes-Benz Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.832 kg Carrying capacity: 11.668 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio - Radio, MP3 enabled - Remote central locking - Reversing camera - Speed limiter Lodpfxjzdd H Io Ammehh - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: good (used), mileage: 740,224 km, power: 368 kW (500.34 HP), first registration: 11/2020, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: air, total length: 5,960 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, power mirror, retarder, second fuel tank, soot filter, spoiler, General information Number of doors: 2 Cab: Highline Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Transmission Transmission: Scania Opticruise, 12 gears, Automatic Axle configuration Lhjdpfx Aezdd Hzommeh Make axles: Scania Brakes: disc brakes Suspension: air suspension Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction Weights Empty weight: 8.664 kg Carrying capacity: 10.836 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6d Maintenance APK (MOT): tested until 11/2026 History Number of owners: 2 Condition Technical condition: good Visual appearance: good Number of keys: 3 (3 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Intarder - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - Sunroof - Toilet - Toolbox - Visor - Webasto - Xenon lighting

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Lodpfewwl N Ssx Ammohh Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1999, Offset 8 color with perfecting Heidelberg SM74-8-P-H Year: 1999 Number of impressions (mio): 247 Machine control - CP 2000 Feeder - Preset feeder - Suction feeder table Lodpfx Amszdcx Ajmjhh - Double sheet control - Steel plate in feeder Printing units - Number of printing unit(s): 8 - Machine with perfecting: 8/0, 4/4 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans Delivery - Standard delivery - Powder spray