Used Cranab Gripper for sale (772)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ Nledst Hw D Rspfx Abzod max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Nedpfxjt Hw R Dj Abzsld Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Nedpjzc N D Nsfx Abzold Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Njdpfx Aozc N Ubjbzjld Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, color: red, driver cabin: other, gearing type: other, Equipment: crane, Vehicle location: Bovenden, emergency stop, gripper control, foldable, 2-point mechanical support, radio remote control, 3x hydraulic extensions. Superstructure: ARCHIVE IMAGE, HMF 340-K3 RC, radio remote control, 20 available! Compact knuckle boom crane with high lifting capacity, radio remote control, 3 hydraulic extensions, hydraulic reach 7.15 m, lifting capacity 985 kg at 3.2 m outreach, up to 435 kg at 7.15 m outreach. Nodpfezi E Ipsx Abzjld Load chart: 3.2 m - 985 kg, 4.5 m - 695 kg, 5.8 m - 535 kg, 7.1 m - 435 kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2021, controller model: 15" Touch B Panel PC, _____ Description: Year of manuf. : 2021 Control : 15" Touch B Panel PC Working length : 1530 mm Pressing force : 400 kN Technical Specifications Machine Type:Press Brake / Robotic Bending Cell Year of manufacture:November 2021 Operating hours:655 h Number of bends:18,337 Max. pressing force:400 kN Working length:1,530 mm Column width:1,530 mm Max. stroke:200 mm Distance between table and ram:400 mm Working height:975 mm Max. working speed:25 mm/s Machine weight Features Control:15" Touch B Panel PC (touchscreen) Angle measurement system Robot:KUKA 6-axis robot KR12R1810 / ME-30-60-60 Robot payload:12 kg Rear stop:5-axis (X1, X2, R, Z1, Z2) made of aluminum Gripper system:Combination gripper (equipped with six suction cups and a clamp) Safety system:Iris Lazersafe (bending line safety) Cell protection:Protective fence with electrically controlled access door Nlodjzkxkmjpfx Abzod

Condition: new, Year of construction: 2016, Storage location number: 100206347 Transport dimensions (L x W x H): 0 x 0 x 0 ---- HKS RB-K200 Year of manufacture: 2016 Class: 18 - 22 tons Mounting: SW48 LikuFix on SW48 - 2x coupling (gripper/rotation) - Electrical coupling (5-way) - Rotary feedthrough (5-way) Max. operating pressure: 350 bar Nledpfx Aszkznnsbzed - Flow control and pressure relief valve Location: Passau

Condition: used, Complete gripper Nljdpfxjzkzbne Abzod Shells 800mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BAZ and extrusion die system for manufacturing car sill components, consisting of: *Machining equipment: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2 coolant treatment units *Assembly of subassemblies (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for Robot 1 - Marking station Nodpozi Efusfx Abzeld - Robot 2 KUKA KR120 R3500 - Gripper for Robot 2 - Interface between robot and machining center - Cleaning unit for components - Assembly machine with 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for Robot 5 - Pallet station - Safety enclosure - Electrical control and integration Further information available upon request.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x6, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,800 mm, loading space width: 2,480 mm, loading space height: 800 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - All-wheel drive - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn - Particle filter - Radio/Multimedia system - Rear view camera - Sunroof - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox Internal number for customer inquiries: 4-093 MAN TGS 33.520 6x6 BL with wheelbase 4,200 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE IN STOCK !! As a special flatbed truck with a Fassi F235 loading crane. !!! Crane exchange to F235 6-section boom or F255 with 4 or 6 sections possible for an extra charge. EURO 6E !! Cab TM: the comfortable one (narrow, long, medium height) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * 4,200 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 hp, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD, with Retarder 35 * Retarder Eco, speed-dependent, adjustable, energy-efficient * High-performance engine brake MAN EVBec, adjustable * Differential locks front, rear, center of the driven rear axles * Trailer coupling ROCKINGER Type 500 G 6A (or 40 on request) * Control panel MAN EasyControl, 4 functions, operable from the outside when the door is open * Driver's comfort seat, air-sprung, with lumbar support, shoulder adjustment and seat heating * Multifunction steering wheel, leather, adjustable in height and tilt * Bunk, lower, with slatted frame and head adjustment * Sunblind, front windshield, inside, electric * Refrigerator, pull-out, and drawer * Infotainment control MAN SmartSelect with touchpad and direct entry * MAN Media System Navigation Professional 12.3 inches * MAN Sound System Advanced with subwoofer * Smartphone integration Superstructure: Flatbed with dimensions 5800 x 2480 x 800 mm Side walls 1x split (2 flaps) per side, with side wall release The floor plate is standard made of laminated, Finnish multi-layer wood with a thickness of 30 mm and is screwed to the outer frame and cross members, which are perforated at an angle of 45°. Tie-down rail recessed in the middle in the direction of travel 4 work lights 2 stainless steel toolboxes, each one to the right and left after the 3rd axle Fassi F235 loading crane: * F235A.2.4 e-dynamic 4-section boom * Load capacity at 12.7 m still 1,345 kg * Swivel range 400° * Double knuckle system with PROL1NK (overextending knuckle arm up to 15°) * Electronic overload cut-off device with FX500 * Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) (Alternatively, linear control system in stock) * Emergency shut-off, as well as optical alarm (90% and 100%) including adjustable digital swivel limit * FASSI stability control FSC incl. LMB II * Control system for 2 additional functions with »2 hose guides for e.g. gripper or tongs (5th & 6th control circuit) Nljdpfxozikzus Abzjd * Manual extensions for 5th and 6th section possible for an extra charge Financing is possible with our financing partners. ...

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit Nsdpfx Aey Tn D Debzeld - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets Nledpfjyb Sbuox Abzsd - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2011, Overview This cold glue labeller was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles including control of label presence, underfill detection by X-ray, and bottle breakage detection with automatic rejection. The machine includes special equipment for bottles with neck foil. It comes with 6 format parts. The Domino laser, vacuum unit and glue pumps are not included in the scope of delivery. It is available immediately and can be viewed by appointment. Nodpfjwz Evysx Abzjld Technical data  - Type: Cold glue labeller with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) - Capacity: up to 36,000 bottles per hour (max. output without orientation, as per documentation) - Container type: glass, transparent - Container diameter: 59-67.5 mm - Container height: 226-260 mm - Closure material: metallic, closure diameter: 28 mm - Belt height: 1000 mm - Electrical connection: 400 V, 50 Hz - Max. Ambient temperature: 40 °C - Device diameter container carousel: 1150 mm - Control functions (Spectrum TX): Label control (sensors), underfill control (X-Ray), bottle breakage control, rejection - Special feature: Processing of NRW bottles with neck film Scope of Delivery  - HEUFT Tornado W incl. 2 cold glue stations - Spectrum TX control system - 6 format parts - Without domino laser, vacuum cleaner and glue pumps  

Condition: used, Year of construction: 2005, Overview  Nljdpfx Abowd Uk Sjzsd This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  - Capacity: Up to 60,000 bottles per hour - Formats: Supports 11 bottle formats - From 0,3l - 0,66l - Steini, NRW, Longneck - Container types: Glass, not transparent, non-contoured - Container diameter: 60.4 – 69.1 mm - Container height: 174 – 270 mm - Label positions: - Front (up to 2 labels) - Back (up to 1 label) - Label size range: - Width: 70 – 111 mm - Height: 33 – 100 mm - Band height: 1100 mm - Max. ambient temperature: 40°C - Power connection: 400 V - Machine design: Straight version, size L (approx. 3360 mm wide) - Bottle carousel diameter: 1610 mm - Number of bottle plates: 42 - Bottle rotation in carousel: Mechanical - Guide star diameter: 690 mm - Labelling stations: - 2 x Cold glue labelling stations - 8 glue pallets - 9 gripper positions - Automatic magazine feeding Scope of Delivery  - 1 x Labelling Machine | HEUFT | TORNADO | 2005 - Including: - 2 x Integrated Laser Coders | Bluhm - Complete labelling setup with format parts for 11 bottle formats - Cold glue stations, glue pallets, gripper arms, and automatic magazine - Technical documentation

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details - Semi-automatic new glass pusher with interchangeable gripper units Nljdpfx Abovtpc Aozsd - 4 heads: adjustable depending on the layer pattern - ALWID FEEDING TABLE + ALWID DEPALLETIZER

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection Nedpfjvptt Rjx Abzjld - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm Nsdpezhwu Eefx Abzsld - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun Nljdpfx Aozi Ex Uobzed · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a high-quality, customer-specific robotic handling system from Wehling Anlagen- und Maschinenbau GmbH, manufactured in 2018. The system was originally developed for the automated processing of wooden pallets and large-format sheet materials and combines two work processes in one system: * automatic destacking of nested wooden pallets * automatic sorting and restacking of large-format sheets according to quality classes The core of the system is a powerful 6-axis Kawasaki BT200L industrial robot with an automatic tool changer. The system is ideally suited for applications in the wood, construction materials, sheet materials, and logistics industries, or as a basis for individual automation projects. Technical equipment: Manufacturer: Wehling Anlagen- und Maschinenbau GmbH Year of manufacture: 2018 Project No.: P113104 Kawasaki 6-axis industrial robot BT200L Robot payload: 200 kg Large working radius Siemens TP700 Comfort touch panel PLC control Main switch cabinet Automatic tool changer Pallet gripper Sheet suction gripper 4 pallet stations Automatic pallet recognition Paper dispenser for interleaving sheets Safety fence Safety light curtains Pneumatic system Possible applications: Pallet handling Pallet destacking Pallet turning Sheet sorting Order picking Material handling Automation of manufacturing processes Robotics projects Retrofitting of existing production systems Scope of delivery: Complete robotic system Kawasaki BT200L Robot controller Switch cabinet Siemens HMI Pallet gripper Sheet gripper Tool changer station Pallet stations Paper dispenser Safety fence Safety light curtains Documentation Operating manual Condition The system is in operation. The scope of delivery corresponds to the existing components. An inspection is possible by appointment. Special features: Special machine construction "Made in Germany" High-quality Kawasaki industrial robot Extensive documentation available Ideal basis for retrofit or automation projects Technical data: Feature Value Manufacturer Wehling Anlagen- und Maschinenbau GmbH Type Combined system pallet destacker / sheet sorting Year of manufacture 2018 Project P113104 Robot Kawasaki BT200L Payload 200 kg Control Siemens TP700 HMI / PLC Nlodpoziwprjfx Abzsd Gripper Pallet gripper + sheet suction gripper Safety equipment Light curtains, protective fence

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Njdpfx Aox Ruudjbzjld Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Nodpfjxmvnusx Abzeld Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible. Nlodpjzi Da Rsfx Abzed

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Additional information • Axes: 2 • Effective Cutting Area: 1500 x 3000 mm • Maximum Cutting Thickness: up to 50 mm • Rapid Travel Speed: 4000 mm/min • Maximum Cutting Speed: 3000 mm/min • Control: KOIKE D420 • Control Functions: Rotation, mirror, nesting, recovery, piercing point selection Nlsdpjx D Nhvefx Abzod • CNC Display: 7” color, multilingual • Data Input: USB / MDI • Program Format: EIA • Software: KOIKE PNC-CAM Expert V2E + FastCAM license • Preinstalled Cutting Patterns: 47 shapes • CAD Import: DXF, DWG • Auto Nesting / Sequencing: Yes • Motors: Stepping motors (X/Y), DC motor for torch lifter • Input Voltage: 1~ 200–240V, 50/60 Hz • X/Y Drive: Rack and Pinion, linear guides • Torch Holder: Ø35 mm • Initial Torch Height Control: Yes • Torch Collision Protection: Yes • Arc Voltage Height Control: Yes (1:1 or 50:1) • Plasma Source: Kjellberg CutFire 100i (100A) • Mains Voltage: 3~ 400V ±10%, 50 Hz • Power Consumption: 16.6 kVA (100% duty cycle) • Cutting Current: 35–100 A • Duty Cycle: 100% at 100 A • Cutting Range: 1–20 mm (recommended), max. 40 mm • Piercing Thickness: up to 20 mm • Open Circuit Voltage: 330 V DC • Efficiency: 0.92 • Power Factor: 0.97 • Cooling: Air cooled (built-in fan), torch gas cooled • Gas Supply: Air, 5.5 bar, 220 Nl/min • Protection Class: IP21 • Weight: 50 kg • Dimensions: 710 x 280 x 590 mm • Plasma Source • Control Unit • Laptop with FastCAM license • Plasma Table 3000 x 1500 mm (4 suction chambers) • Ventilation Unit with Outlets • Hoist – 500 kg Lifting Capacity • Piston Compressor 5.5 kW, 270 L, 10 bar • Air Dryer 1500 L/min • Lifting Magnet and Sheet Gripper • Nozzles, Electrodes, and Spare Parts

Condition: good (used), functionality: fully functional, For sale is a high-quality FELSOMAT FlexBox for automated workpiece handling in serial production. The system is designed for the automatic loading and unloading of CNC turning, milling, grinding, or gear cutting machines. It features servo-driven handling with a pneumatic gripper and an additional linear transfer axis, enabling the implementation of multiple processing stations or larger travel distances. The system comes from an industrial production environment and is ideally suited for special machine builders, automation specialists, or as a basis for retrofit projects. Equipment: FELSOMAT FlexBox Fully enclosed safety enclosure Automatic linear handling Servo-driven axes Pneumatic workpiece gripper Additional linear transfer axis Workpiece storage Control panel Safety monitoring Control cabinet integrated Extraction connection Completely wired Typical applications: CNC turning machines CNC machining centers Grinding machines Gear cutting machines Measuring stations Assembly automation Manufacturing cells Technical data (typical) Feature Specification Manufacturer FELSOMAT Model FlexBox Design Automation cell Axes Servo linear system Gripper pneumatic Workpiece handling automatic Voltage supply 400 V Safety cabin present Njdpfx Aozivapjbzjld Additional axis Linear transfer Scope of supply FELSOMAT FlexBox Servo handling Linear transfer axis Gripper system Control panel Control cabinet Safety cabin Condition The system is in good optical condition. The handling system, linear axis, and safety devices are all fully functional. The machine is being sold due to the closure of the operating facility. An inspection can be arranged at any time by appointment.

Condition: like new (used), Year of construction: 2022, operating hours: 680 h, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: SIEMENS 840D, spindle speed (max.): 25,000 rpm, operating hours of spindle: 680 h, coolant supply: 80 bar, distance between spindles: 250 mm, spindle nose: HSK40, number of spindles: 2, The BA W02-22 is a horizontal, twin-spindle machining center for 4-axis machining of small non-ferrous metal workpieces. Linear and torque motors in the feed axes guarantee maximum dynamics and very short non-productive times while maintaining high workpiece accuracy. SPECIAL MACHINE FEATURES — Monobloc steel/mineral-cast composite design — Linear motors in X, Y, Z axes; torque motors in rotary axes — Gantry drive in the Y-axis with electronic coupling for high positional accuracy under eccentric load — Mass-optimized machining unit ("box-in-open") — Workspindle available with HSK A40 (25,000 rpm) — Double swivel carrier with 2 integrated rotary axes for in-cycle loading/unloading Nlsdjzmmpvepfx Abzjd — Fanuc robot loader WORKING RANGE — LINEAR AXES Spindle distance 250 mm X-axis 200 mm Y-axis (tool change position) 350 mm (525 mm) Z-axis 300 mm WORKSPINDLE HSK A40 Speed range 1 – 25,000 rpm Power (40% duty cycle) 18 kW at 10,500 rpm Torque (40% duty cycle) 17 Nm Nominal power 14 kW at 10,500 rpm Nominal torque 13 Nm Spindle bearing diameter 50 mm Spindle lubrication Minimum-quantity oil lubrication FEED DRIVES Three-phase linear motors, type 1FN3 (Siemens), with 3 cooling circuits. STANDARD PARAMETER SET X Y Z Max. rapid traverse 80 m/min 120 m/min 120 m/min TOOL MAGAZINE Rail-guided magazine chain in pick-up system. Magazine loading at ergonomic height, tools self-locking and protected against chips and spray water. Air-sensing cleaning on magazine side. Maximum chain speed 100 m/min. Tool change system Pick-Up Capacity 2 × 20 magazine pockets INTEGRATED AUTOMATION WITH WORKPIECE MAGAZINE The machine is supplied with an integrated automation cell — an independent manufacturing cell with one-shift workpiece supply, ideal for small workpieces. Loading and unloading of the double swivel carrier are performed in parallel to machining time by an integrated 6-axis Fanuc LR Mate robot mounted on the ceiling, allowing more freedom of motion. The loading area is sealed against chips and cooling lubricant, with parts lock for unprocessed and finished parts exchange in parallel with system production time. Iajdpwhiezh Sqzekrjw ROBOT — FANUC LR MATE 200ID The 7 kg robot performs multi-gripping, pallet movement and handling of workpieces up to 0.7 kg with a double gripper. Internal line routing with integrated gripper control, ProfiNet communication between machine and robot. WORKPIECE MAGAZINE Workpieces are placed in pallets — up to 24 pallets stored in the elevator car, cycled vertically. Pallet size 632 × 436 mm (inlay 600 × 400 mm). Ideal for workpieces up to 100 × 100 × 50 mm. Pallet guidance in wear-free PE or hard-anodized PTFE-impregnated aluminum. Basic grid 18 mm allowing fine adjustment to workpiece height. Wear-free ball-screw drive.