Used Deckel Fp2 5749 for sale (885)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis vertical machining center with movable column, equipped with a rotary table (mountable both horizontally and vertically) with a diameter of 550mm. Allows pendulum machining (pallet change type) with dedicated partition. Includes laser presetter, wireless workpiece probe HEIDENHAIN TS 642, belt chip conveyor, high-pressure through-spindle cooling with paper filter, spindle line cooler, and remote electronic handwheel HEIDENHAIN. Pedpfxey Diabo Ag Degk

Condition: used, Year of construction: 2005, Technical details: x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm table load capacity: 800 kg control: SIEMENS 840D shopmill turning speeds: 12.000 1/min tool adaptor: HSK 63 rapid traverse: 50 m/min tool change unit: 30 Pos. electr. connected load with add. coolant: 56 kVA weight of the machine ca.: 9,5 t transport measurements machine: 4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, Pgjdpfsy Ai Naox Ag Dek internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h) *

Condition: used, BAZ DMC 63 V in very good condition. The machine can be inspected under power. Psdpfx Agjy Atnaj Djgk

Condition: used, Year of construction: 2002, operating hours: 22,552 h, functionality: fully functional, machine/vehicle number: 11140002063, travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: TNC 430, table load: 550 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis milling machine, SK 40. Drive amplifier and hard disk "new" January 2025, ball screw "new" 2024. Pgjdpfxjy Ahxte Ag Dsk

Condition: used, Year of construction: 2004, operating hours: 47,288 h, functionality: fully functional, machine/vehicle number: 11120011383, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC530, table width: 600 mm, table length: 1,000 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,344 h, coolant supply: 17 bar, spindle motor power: 15,000 W, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis milling machine with production package IKZ 17 bar, active motor spindle cooling Pgjdpfey Ahw Nex Ag Dok

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° Pedpfx Agsyz Dcfs Dogk table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. SK40 - S20 Heidenhain active control Automatic feeds on all axes. 4th axis controlled. Pgedpfey Al Tnjx Ag Djk

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2201-5046, Good condition with various tool holders. SK40 - S20 Heidenhain active control Automatic feeds on all axes. Pedsy Al H Iepfx Ag Dogk

Condition: good (used), travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, In working condition Pgjdjylvc Depfx Ag Dsk

Condition: good (used), travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, In working condition Pjdjylvb Hjpfx Ag Dsgk

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA Pedpfx Aeyz Tkfjg Degk • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment • Chip conveyor Podpfx Agox D I Ibe Degk Dimensions Machine Depth 3000 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment Pgedox Nr Tuopfx Ag Dok • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Pgsdpfx Agoy Ahnze Djk Weight estimated approx. 0.1 t

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. Pedpfx Ajv Sy Sfjg Djgk - We are happy to take care of shipping and/or installation.

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 520 mm, DMG DMU 60 T – 5-Axis CNC Machining Center, Heidenhain TNC 430, Year 2001 We offer for sale a universal 5-axis machining center DMG DMU 60 T, ideal for prototype and small batch production, toolmaking, and precision machining of more complex parts. The machine is equipped with a rotary and tilting table and features Heidenhain TNC 430 control, which remains highly sought after for its simplicity and reliability. Technical Data: Pgjdpfxjy A N U Ns Ag Dek - Travels: X 600 mm / Y 560 mm / Z 520 mm - Rotary and tilting table (5 axes) - Table diameter: approx. 630 mm - Table load capacity: approx. 350 kg - Spindle taper: SK40 - Spindle speed: up to 12,000 rpm - Control: Heidenhain TNC 430 - Tool magazine Equipment: - 5-axis machining (rotary + tilting table) - CNC Heidenhain control - Tool magazine - Fully enclosed machine guarding Condition: The machine is in good visual and technical condition, consistent with its age. Test run possible by arrangement. This machine is suitable for companies seeking cost-effective 5-axis machining with universal application. Further information available on request. Machine dimensions: length: 2.9 m – width: 2.2 m – height: 2.9 m, Weight: 6,500 kg

Condition: good (used), Year of construction: 1994, Deckel Maho DMC 103 V Control: Heidenhain Working area: 1,000 x 600 x 600 mm Spindle speed: max. 8,000 rpm Pedpfeykbiysx Ag Degk Torque: 83 Nm Tool holder: SK 40 Table clamping surface: 1,200 x 600 mm Max. table load: 800 kg Required space, approx.: 3.7 x 3.6 m

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Pjdpfxjpmrpxe Ag Degk Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm SK 40 drawbar thread S 20 x 2 Vertical milling head 40 – 2,000 rpm, 18 speeds Pgjdpfeymffksx Ag Dok Universal table 800 x 420 mm 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Completely overhauled by Harich in 2000!

Year of construction: 1981, condition: used, Make cover Type FP 4 Table: dimensions 1000 x 470 mm longitudinal movement X - axis 700 mm transversal movement Y - axis 400 mm vertical movement Z - axis 450 mm projection spindle 50 450 mm spindle mounting ISO 40 Number of spindle speeds 18 Spindle speed range 31,5 1600 rpm Number of revolutions horizontal spindle 18 pcs. Pgjdpfx Aoihp U Dog Dsk Speed range horizontal spindle 31,5 1600 rpm Weight machine 2000 kg feeds X Y Z axis 18 pcs 10 500 mm/min Accessories milling head with quill Table 1000 x 470 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 62,469 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine. • Working hours (as of 04.07.2023): • Operating hours: 62,469 h • Spindle hours: 17,307 h • Rotary/Swivel axes: • C-axis indexing: 360° • B-axis indexing: 0–180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions Pgsdpfxjydlacj Ag Djk • Coolant system: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: External coolant supply • Rapid traverse (X/Y/Z): 50 m/min Additional equipment • Touch probe: TS 641

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 2 rpm, table length: 900 mm, table width: 530 mm, type of input current: three-phase, total length: 900 mm, total width: 530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2 rpm, warranty duration: 3 months, working range: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this overhauled Deckel FP 4-60T tool milling machine with Dialog 11 control, year of manufacture 1992. Deckel: FP 4-60T Pgsdpfx Agex Sv Ubj Djk Condition: Fully overhauled Tool changer: 24 positions Control: Dialog 11 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total length: 800 mm, table width: 460 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, warranty duration: 3 months, Equipment: documentation/manual, We are offering this fully overhauled Deckel FP4 M milling machine, year of manufacture 1985. Manufacturer: Deckel Model: FP4 M Year: 1985 Condition: overhauled Control: TNC113 Aktiv control Pgodpfxex Sllps Ag Dsk Optional: universal table with a clamping surface of 800mm x 370mm If you have any questions or require further information, please send us a message or give us a call.

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Pgjdpsv Td Eljfx Ag Djk Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: excellent (used), Year of construction: 1999, Yang Eagle SMV 1000 Year of manufacture: 1999 Control: - Fanuc OM - Electronic handwheel Main spindle: - max. 6000 rpm Tool changer: - 20 magazine slots Travel paths: - X-1020, Y-510, Z-510 mm Pgedpfx Agsyz R Ubj Djk Table: - Clamping surface 1070 x 500 mm - Chip conveyor Availability: - Immediately or by arrangement